nginx使用lua waf防火墙来做防CC配置

nginx添加lua模块

启动和安装nginx

        yum install -y nginx 
systemctl daemon-reload
systemctl enable nginx
#为了实验方便这里就直接yum安装了,配置了开机启动

注意:出现报错
[root@wh02 ~]# useradd  nginx -M -s /sbin/nologin
useradd: cannot open /etc/shadow
表示 你曾经锁定了/etc/shadow 文件

#添加nginx系统启动:
vim /usr/lib/systemd/system/nginx.service 
添加以下内容:
#----------------------------------------------------------
[Unit]
Description=nginx - high performance web server
Documentation=http://nginx.org/en/docs/
After=network.target remote-fs.target nss-lookup.target

[Service]
Type=forking
PIDFile=/run/nginx.pid
ExecStartPre=/usr/sbin/nginx -t -c /etc/nginx/nginx.conf
ExecStart=/usr/sbin/nginx -c /etc/nginx/nginx.conf
ExecReload=/bin/kill -s HUP $MAINPID
ExecStop=/bin/kill -s QUIT $MAINPID
PrivateTmp=true

[Install]
WantedBy=multi-user.target
#----------------------------------------------------------

#启动 nginx
[root@wh02 ~]# systemctl daemon-reload
[root@wh02 ~]# systemctl start nginx

#查看状态
[root@wh02 ~]# systemctl status nginx

#停止
[root@wh02 ~]# systemctl stop nginx

#获取默认编译参数,用于后面添加 lua模块
[root@wh02 ~]# nginx -V
nginx version: nginx/1.16.1
built by gcc 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) 
built with OpenSSL 1.0.2k-fips  26 Jan 2017
TLS SNI support enabled
configure arguments: --prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib64/nginx/modules --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/tmp/client_body --http-proxy-temp-path=/var/lib/nginx/tmp/proxy --http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi --http-uwsgi-temp-path=/var/lib/nginx/tmp/uwsgi --http-scgi-temp-path=/var/lib/nginx/tmp/scgi --pid-path=/run/nginx.pid --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-ipv6 --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-stream_ssl_preread_module --with-http_addition_module --with-http_xslt_module=dynamic --with-http_image_filter_module=dynamic --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_degradation_module --with-http_slice_module --with-http_stub_status_module --with-http_perl_module=dynamic --with-http_auth_request_module --with-mail=dynamic --with-mail_ssl_module --with-pcre --with-pcre-jit --with-stream=dynamic --with-stream_ssl_module --with-google_perftools_module --with-debug --with-cc-opt=‘-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic‘ --with-ld-opt=‘-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E‘

    

编译安装lua模块

        echo "export LUAJIT_LIB=/usr/local/luajit/lib
export LUAJIT_INC=/usr/local/luajit/include/luajit-2.0 " >>/etc/profile


#ngx_devle_kit下载解压
mkdir  /leilei
cd /leilei
wget https://github.com/simpl/ngx_devel_kit/archive/v0.3.0.tar.gz
tar -xf v0.3.0.tar.gz

#lua-nginx-module模块下载解压
wget https://github.com/openresty/lua-nginx-module/archive/v0.10.8.tar.gz
tar xf v0.10.8.tar.gz


#安装luajit
wget http://luajit.org/download/LuaJIT-2.0.5.tar.gz
tar zxf LuaJIT-2.0.5.tar.gz
cd LuaJIT-2.0.5
make
make install

#增加环境变量
export LUAJIT_LIB=/usr/local/lib
export LUAJIT_INC=/usr/local/include/luajit-2.0

#----------------至此 模块都配置好了,需要在nginx中导入模块 ------------------------#

#编译模块可能出现的报错:
[root@wh02 LuaJIT-2.0.5]# make PREFIX=/usr/local/luajit
==== Building LuaJIT 2.0.5 ====
make -C src
make[1]: gcc: Command not found
make[1]: Entering directory `/usr/local/src/LuaJIT-2.0.4/src‘
make[1]: gcc: Command not found
make[1]: gcc: Command not found
make[1]: gcc: Command not found
make[1]: gcc: Command not found
make[1]: gcc: Command not found
Makefile:233: *** Unsupported target architecture.  Stop.
make[1]: Leaving directory `/usr/local/src/LuaJIT-2.0.4/src‘
make: *** [default] Error 2
解决办法:   yum install -y gcc



#编译安装lua模块:
tar xf LuaJIT-2.0.5.tar.gz
cd LuaJIT-2.0.5
make PREFIX=/usr/local/luajit
make install PREFIX=/usr/local/luajit

    

下载扩展模块:

        cd /server/tools/leilei
wget https://github.com/simpl/ngx_devel_kit/archive/v0.3.0.tar.gz
tar -xf v0.3.0.tar.gz

wget https://github.com/openresty/lua-nginx-module/archive/v0.10.11.tar.gz
tar xf v0.10.11.tar.gz

[root@wh02 leilei]# ll
total 680
drwxrwxr-x 10 root root   4096 Nov  4  2017 lua-nginx-module-0.10.11
drwxrwxr-x  9 root root   4096 May 10  2016 ngx_devel_kit-0.3.0
-rw-r--r--  1 root root 616653 Jan  5 04:32 v0.10.11.tar.gz
-rw-r--r--  1 root root  66455 Jan  5 04:32 v0.3.0.tar.gz

    

nginx添加扩展模块

        #获取原来的编译参数
[root@wh02 tools]# nginx -V
nginx version: nginx/1.16.1
built by gcc 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) 
built with OpenSSL 1.0.2k-fips  26 Jan 2017
TLS SNI support enabled
configure arguments: --prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib64/nginx/modules --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/tmp/client_body --http-proxy-temp-path=/var/lib/nginx/tmp/proxy --http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi --http-uwsgi-temp-path=/var/lib/nginx/tmp/uwsgi --http-scgi-temp-path=/var/lib/nginx/tmp/scgi --pid-path=/run/nginx.pid --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-ipv6 --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-stream_ssl_preread_module --with-http_addition_module --with-http_xslt_module=dynamic --with-http_image_filter_module=dynamic --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_degradation_module --with-http_slice_module --with-http_stub_status_module --with-http_perl_module=dynamic --with-http_auth_request_module --with-mail=dynamic --with-mail_ssl_module --with-pcre --with-pcre-jit --with-stream=dynamic --with-stream_ssl_module --with-google_perftools_module --with-debug --with-cc-opt=‘-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic‘ --with-ld-opt=‘-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E‘

# 下载nginx 1.16.1 安装包:
cd /server/tools/leilei
wget http://nginx.org/download/nginx-1.16.1.tar.gz
tar xf nginx-1.16.1.tar.gz
cd nginx-1.16.1/

#重新编译nginx
./configure  --prefix=/usr/share/nginx --sbin-path=/usr/sbin/nginx --modules-path=/usr/lib64/nginx/modules --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --http-client-body-temp-path=/var/lib/nginx/tmp/client_body --http-proxy-temp-path=/var/lib/nginx/tmp/proxy --http-fastcgi-temp-path=/var/lib/nginx/tmp/fastcgi --http-uwsgi-temp-path=/var/lib/nginx/tmp/uwsgi --http-scgi-temp-path=/var/lib/nginx/tmp/scgi --pid-path=/run/nginx.pid --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-http_ssl_module --with-http_v2_module --with-http_realip_module --with-stream_ssl_preread_module --with-http_addition_module --with-http_xslt_module=dynamic --with-http_image_filter_module=dynamic --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gunzip_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_degradation_module --with-http_slice_module --with-http_stub_status_module --with-http_perl_module=dynamic --with-http_auth_request_module --with-mail=dynamic --with-mail_ssl_module --with-pcre --with-pcre-jit --with-stream=dynamic --with-stream_ssl_module --with-google_perftools_module --with-debug --with-cc-opt=‘-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector-strong --param=ssp-buffer-size=4 -grecord-gcc-switches -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -m64 -mtune=generic‘ --with-ld-opt=‘-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E‘ --add-module=/server/tools/leilei/ngx_devel_kit-0.3.0 --add-module=/server/tools/leilei/lua-nginx-module-0.10.11


#这是添加了这两个模块后编译的: 
 --add-module=/server/tools/leilei/ngx_devel_kit-0.3.0 --add-module=/server/tools/leilei/lua-nginx-module-0.10.11
 
 编译也有可能会报错: ./configure: error: the invalid value in --with-ld-opt="-Wl,-z,relro -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -Wl,-E"
 解决方法:
 yum -y install redhat-rpm-config.noarch
 
编译出错: ./configure: error: ngx_http_lua_module requires the Lua library.
解决办法: 
yum install lua-devel -y
 
编译出错:/configure: error: the HTTP XSLT module requires the libxml2/libxslt
解决办法:
yum install libxslt-devel -y

编译出错: ./configure: error: the HTTP image filter module requires the GD library.
解决办法:
yum install gd gd-devel -y

编译出错: ./configure: error: perl module ExtUtils::Embed is required
解决办法: 
yum install perl-ExtUtils-Embed -y

编译出错: ./configure: error: the Google perftools module requires the Google perftools
解决办法: 
yum install gperftools -y


安装完毕:
Configuration summary
  + using system PCRE library
  + using system OpenSSL library
  + using system zlib library

  nginx path prefix: "/usr/share/nginx"
  nginx binary file: "/usr/sbin/nginx"
  nginx modules path: "/usr/lib64/nginx/modules"
  nginx configuration prefix: "/etc/nginx"
  nginx configuration file: "/etc/nginx/nginx.conf"
  nginx pid file: "/run/nginx.pid"
  nginx error log file: "/var/log/nginx/error.log"
  nginx http access log file: "/var/log/nginx/access.log"
  nginx http client request body temporary files: "/var/lib/nginx/tmp/client_body"
  nginx http proxy temporary files: "/var/lib/nginx/tmp/proxy"
  nginx http fastcgi temporary files: "/var/lib/nginx/tmp/fastcgi"
  nginx http uwsgi temporary files: "/var/lib/nginx/tmp/uwsgi"
  nginx http scgi temporary files: "/var/lib/nginx/tmp/scgi"
  

## 编译安装nginx 
  make

## 平滑升级:
\cp -af /usr/sbin/nginx ~

[root@wh02 nginx-1.16.1]# cp -af objs/nginx /usr/sbin/
cp: overwrite ‘/usr/sbin/nginx’? y

#发送协同工作信号
[root@wh02 nginx-1.16.1]# kill -USR2 `cat /run/nginx.pid`
[root@wh02 nginx-1.16.1]# ps -ef|grep nginx
root     21305 23677  0 01:31 ?        00:00:00 nginx: master process /usr/sbin/nginx
nginx    21306 21305  0 01:31 ?        00:00:00 nginx: worker process
root     21311  1443  0 01:31 pts/2    00:00:00 grep --color=auto nginx
root     23677     1  0 Jan04 ?        00:00:00 nginx: master process /usr/sbin/nginx
nginx    23678 23677  0 Jan04 ?        00:00:00 nginx: worker process

#发送退出信号
[root@wh02 nginx-1.16.1]#  kill -QUIT `cat /run/nginx.pid`
[root@wh02 nginx-1.16.1]# ps -ef|grep nginx
root     21368  1443  0 01:32 pts/2    00:00:00 grep --color=auto nginx
root     23677     1  0 Jan04 ?        00:00:00 nginx: master process /usr/sbin/nginx
nginx    23678 23677  0 Jan04 ?        00:00:00 nginx: worker process

升级完毕!

    

lua模块添加

        步骤整理:
wget http://luajit.org/download/LuaJIT-2.0.2.tar.gz
tar xf LuaJIT-2.0.5.tar.gz
cd LuaJIT-2.0.5
make PREFIX=/usr/local/LuaJIT/include/luajit
make install PREFIX=/usr/local/nginx/lua/luajit

wget https://github.com/simplresty/ngx_devel_kit/archive/v0.3.0.tar.gz
tar xf v0.3.0.tar.gz
get https://github.com/openresty/lua-nginx-module/archive/v0.10.11.tar.gz
tar xf v0.10.11.tar.gz

export LUAJIT_LIB=/opt/programs/nginx_1.12.2/lua/luajit/lib
export LUAJIT_INC=/opt/programs/nginx_1.12.2/lua/luajit/include/luajit-2.0

    

配置:

        #nginx.conf配置文件中的http区块加入如下: 
#----------waf防火墙-----------------------------#
lua_package_path "/etc/nginx/conf.d/waf/?.lua";
lua_shared_dict limit 10m;
init_by_lua_file  /etc/nginx/conf.d/waf/init.lua;
access_by_lua_file /etc/nginx/conf.d/waf/waf.lua;
#----------waf防火墙-----------------------------#


#nginx目录下创建相关目录:
mkdir -p /etc/nginx/conf.d/waf/

#进入相关目录下载lua配置文件:
cd /etc/nginx/conf.d/waf/
git clone https://github.com/loveshell/ngx_lua_waf.git
mv ngx_lua_waf waf
cd waf/

[root@wh02 waf]# ll
total 32
-rw-r--r-- 1 root root 2377 Jan  5 04:50 config.lua
-rw-r--r-- 1 root root 6405 Jan  5 04:50 init.lua
-rw-r--r-- 1 root root 1587 Jan  5 04:50 install.sh
-rw-r--r-- 1 root root 4612 Jan  5 04:50 README.md
drwxr-xr-x 2 root root 4096 Jan  5 04:50 wafconf
-rw-r--r-- 1 root root 2295 Jan  5 04:50 waf.lua

# 添加到nginx配置文件中

vim /etc/nginx/nginx.conf

http  {
...
...
#----------waf防火墙-----------------------------#
lua_load_resty_core off;
lua_shared_dict limit 30m;
lua_package_path "/etc/nginx/conf.d/waf/?.lua";
init_by_lua_file  /etc/nginx/conf.d/waf/init.lua;
access_by_lua_file /etc/nginx/conf.d/waf/waf.lua;
#----------waf防火墙-----------------------------#
...
...
}

# 修改 vim /etc/nginx/conf.d/waf/config.lua 配置文件,将规则路径改为: /etc/nginx/conf.d/waf/
RulePath = "/etc/nginx/conf.d/waf/wafconf/"
attacklog = "on"
logdir = "/etc/nginx/logs/hack/"

#没有相关目录就创建相关目录
mkdir -p /etc/nginx/conf.d/waf/wafconf/
mkdir -p /etc/nginx/logs/hack/

通过以上配置并没有让他生效,如果需要生效还需要取config.lua中开启规则才可以.

    

nginx中添加配置:

开启waf 防火墙:

        vim /etc/nginx/conf.d/waf/config.lua
config_waf_enable= "on" 
由于版本更新,新版本的lua配置中已经没有了 waf 开关了,默认就是开启状态,如果需要关闭则需要去 nginx.conf中注释lua.

    

waf防火墙规则配置:

        目录: /etc/nginx/conf.d/waf/config.lua

vim /etc/nginx/conf.d/waf/config.lua
#没修改之前都是默认规则.

	RulePath = "/usr/local/nginx/conf/waf/wafconf/"
    --规则存放目录

	attacklog = "on"
    --是否开启攻击信息记录，需要配置logdir
    
    logdir = "/usr/local/nginx/logs/hack/"
    --log存储目录，该目录需要用户自己新建，切需要nginx用户的可写权限
    
    UrlDeny="on"
    --是否拦截url访问
    
    Redirect="on"
    --是否拦截后重定向
    
    CookieMatch = "on"
    --是否拦截cookie攻击
    
    postMatch = "on" 
    --是否拦截post攻击
    
    whiteModule = "on" 
    --是否开启URL白名单
    
    black_fileExt={"php","jsp"}
    --填写不允许上传文件后缀类型
    
    ipWhitelist={"127.0.0.1"}
    --ip白名单，多个ip用逗号分隔
    
    ipBlocklist={"1.0.0.1"}
    --ip黑名单，多个ip用逗号分隔
    
    CCDeny="on"
    --是否开启拦截cc攻击(需要nginx.conf的http段增加lua_shared_dict limit 10m;)
    
    CCrate = "100/60"
    --设置cc攻击频率，单位为秒.
    --默认1分钟同一个IP只能请求同一个地址100次
    
    html=[[Please go away~~]]
    --警告内容,可在中括号内自定义
    备注:不要乱动双引号，区分大小写

    

访问测试:

http://115.159.79.190/index.php?id=../etc/passwd
访问一个敏感信息,检查是否会被阻止

看到这个提示说明 waf防火墙配置成功!

错误页面也有可能是这样:

测试禁止IP访问:

        #黑名单
ipBlocklist={"1.0.0.1","117.186.242.158"}  #添加上我们自己的IP地址 117.186.242.158,分号分隔

#白名单
ipWhitelist={"127.0.0.1"}  #添加上我们自己的IP地址 117.186.242.158,分号分隔

    

实际黑名单效果:

        --lock-path=/run/lock/subsys/nginx --user=nginx --group=nginx --with-file-aio --with-ipv6 --with-http_ssl_mod

    

        自定义的网站阻止页面:
网站根目录下创建 50x.html 写入以下内容
cat /usr/share/nginx/html
#-------------------------------------------------------
<html xmlns="http://www.w3.org/1999/xhtml"><head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>网站防火墙</title>
<style>
p {
        line-height:20px;
}
ul{ list-style-type:none;}
li{ list-style-type:none;}
</style>
</head>

<body style=" padding:0; margin:0; font:14px/1.5 Microsoft Yahei, 宋体,sans-serif; color:#555;">

 <div style="margin: 0 auto; width:1000px; padding-top:70px; overflow:hidden;">


  <div style="width:600px; float:left;">
    <div style=" height:40px; line-height:40px; color:#fff; font-size:16px; overflow:hidden; background:#6bb3f6; padding-left:20px;">网站防火墙 </div>
    <div style="border:1px dashed #cdcece; border-top:none; font-size:14px; background:#fff; color:#555; line-height:24px; height:220px; padding:20px 20px 0 20px; overflow-y:auto;background:#f3f7f9;">
      <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600; color:#fc4f03;">您的请求带有不合法参数，已被网站管理员设置拦截！</span></p>
<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">可能原因：您提交的内容包含危险的攻击请求</p>
<p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:1; text-indent:0px;">如何解决：</p>
<ul style="margin-top: 0px; margin-bottom: 0px; margin-left: 0px; margin-right: 0px; -qt-list-indent: 1;"><li style=" margin-top:12px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">1）检查提
交内容；</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">2）如网站托管，请联系空间提供商；</li>
<li style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">3）普通网站访客，请联系网站管理员手机号: 18816997176 </li></ul>
    </div>
  </div>
</div>
</body></html>
#-------------------------------------------------------

    

效果图:

原文：https://www.cnblogs.com/superlinux/p/12796506.html