delphi Drag and Drop sample 鼠标拖放操作实例
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了delphi Drag and Drop sample 鼠标拖放操作实例，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含9232字，纯文字阅读大概需要14分钟。
内容图文
Drag and Drop is a common operation that makes the interface user friendly: a user can drag/drop information to controls instead of having to type etc.
The following sample explains basics of drag and drop. For detailed information you should refer to other articles in the wiki and reference documentation.
Please note, since LCL is partially compatible with Delphi‘s VCL, some articles/examples about Delphi drag-and-drop may also apply to LCL.
Contents
Drag and Drop
Despite of the operation‘s simplicity from the user‘s point of view, it might give hard times to an inexperienced developer.
For the code, Drag and Drop operation always consists of at least these 3 steps:
- Some control starts the drag-and-drop operation. This is called the Source
- User drags the mouse cursor around, above other controls or the Source itself. Now a dragged over control needs to decide, if it is able to accept the dragged data.
- Drop happens if a control agrees to accept the dragged data. The accepting control is called the Sender.
To simplify drag-and-drop handling, the LCL provides "automatic" mode. It doesn‘t mean, that LCL does the whole drag-and-drop for you, but it will handle low-level drag object managing (which is not covered in this article).
Example
The example covers automatic drag-and-drop feature between 2 controls (Edit->Treeview) as well as inside a single control (Treeview->Treeview)
- Start the new application.
- Put a TreeView component and Edit on the form.
- Enable Automatic drag-and-drop mode for TreeView and Edit in Object Inspector:
DragMode: dkAutomatic
You can launch the application now, and try to drag anything around. You should not get anything working for now. But, if you press the left mouse button on the Treeview, you‘ll probably see that the cursor icon changed, but still nothing happens when releasing the mouse .
Dragging between controls
Let‘s make a drag-and-drop operation between Edit and TreeView. There the content of Edit will be "dragged" to TreeView and a new tree node created.
To initiate the drag, controls have a special method: BeginDrag()
Create OnMouseDown event for the Edit:
procedure
TForm1.Edit1MouseDown(Sender: TObject; Button: TMouseButton;
Shift: TShiftState; X, Y: Integer);
begin
if Button = mbLeft then{check if left mouse button was pressed}
Edit1.BeginDrag(true); {starting the drag operation}end;
If you launch the application right now and try drag and drop, you‘ll notice that Edit starts the operation, but still nothing happens then you‘re trying to drop to TreeView.
This is because TreeView doesn‘t accept the data. None of the controls accept data by default, so you‘ll always need to provide the proper event handler.
Assign TreeView.OnDragOver operation:
procedure
TForm1.TreeView1DragOver(Sender, Source: TObject; X, Y: Integer;
State: TDragState;
var
Accept: Boolean);
begin
Accept := true;
end;
Of course in some cases, TreeView might deny dropping (if Source or data cannot be handled), but for now, TreeView always accepts the dragging.
Run application and test. Everything should be better now, though still nothing happens on drop.
Assign TreeView.OnDragDrop operation:
procedure
TForm1.TreeView1DragDrop(Sender, Source: TObject; X, Y: Integer);
var
tv : TTreeView;
iNode : TTreeNode;
begin
tv := TTreeView(Sender); { Sender is TreeView where the data is being dropped }
iNode := tv.GetNodeAt(x,y); { x,y are drop coordinates (relative to the Sender) }{ since Sender is TreeView we can evaluate }{ a tree at the X,Y coordinates }{ TreeView can also be a Source! So we must make sure }{ that Source is TEdit, before getting its text }if Source is TEdit then
tv.Items.AddChild(iNode, TEdit(Source).Text); {now, we can add a new node, with a text from Source }end;
Run and test. It should be working now. Dragging a text from Edit to TreeView should create a new node.
Dragging within a control
Sender and Source can be the same control! It‘s not prohibited in any way. Let‘s add the ability to a TextView, to change its nodes location. Since TextView is in automatic DragMode, you don‘t need to start the drag by using DragBegin(). It‘s started automatically on mouse moved with left button hold.
Make sure you have "Accept:=true;" inside the DragOver operation for TreeView source.
Modify the DragDrop event handler to the following:
procedure
TForm1.TreeView1DragDrop(Sender, Source: TObject; X, Y: Integer);
var
tv : TTreeView;
iNode : TTreeNode;
begin
tv := TTreeView(Sender); { Sender is TreeView where the data is being dropped }
iNode := tv.GetNodeAt(x,y); { x,y are drop coordinates (relative to the Sender) }{ since Sender is TreeView we can evaluate }{ a tree at the X,Y coordinates }{ TreeView can also be a Source! So we must make sure }{ that Source is TEdit, before getting its text }if Source is TEdit then
tv.Items.AddChild(iNode, TEdit(Source).Text) {now, we can add a new node, with a text from Source }elseif Source = Sender thenbegin{ drop is happening within a TreeView }if Assigned(tv.Selected) and{ check if any node has been selected }
(iNode <> tv.Selected) then{ and we‘re dropping to another node }beginif iNode <> nilthen
tv.Selected.MoveTo(iNode, naAddChild) { complete the drop operation, by moving the selectede node }else
tv.Selected.MoveTo(iNode, naAdd); { complete the drop operation, by moving in root of a TreeView }end;
end;
end;
That‘s it. If you run the application now, you should have both features working.
- Adding a new node by dragging text from Edit to TreeView
- Dragging nodes inside the treeview
Hints
- You can?/cannot? use some global data to inspect what is being dragged now. Don‘t use global variables, but your form class‘s fields.
- Put the data when you start the drag
- Inspect the data, during control‘s drag over event, and modify Accept flag accordingly
- Read and use the data on drop event
Dragging from other applications
You can drag/drop
Files
Files can be dropped and handled easily by implementing the FormDropFiles event, once AllowDropFiles on the form is set:
procedure TForm1.FormDropFiles(Sender: TObject; const FileNames: arrayof String);
var FileName : String;
beginfor FileName in FileNames dobegin
ShowMessage(FileName);
end;
end;
Text etc
You can drag and drop e.g. text from another application (e.g.t notepad) to a control on your application. The way this is implemented is platform-dependent.
Windows
This code lets you drag and drop selected text from other applications onto an edit control.
unit
Unit1;
{
$mode objfpc
}{
$H+
}
interface
uses
Classes, SysUtils, FileUtil, Forms, Controls, Graphics, Dialogs, StdCtrls,
Windows, ActiveX, ComObj;
type
{
TForm1
}
TForm1 = class(TForm, IDropTarget)
Memo1: TMemo;
procedure FormCreate(Sender: TObject);
procedure FormDestroy(Sender: TObject);
private// IDropTargetfunction DragEnter(const dataObj: IDataObject; grfKeyState: DWORD; pt: TPoint; var dwEffect: DWORD): HResult;StdCall;
function DragOver(grfKeyState: DWORD; pt: TPoint; var dwEffect: DWORD): HResult;StdCall;
function DragLeave: HResult;StdCall;
function Drop(const dataObj: IDataObject; grfKeyState: DWORD; pt: TPoint; var dwEffect: DWORD):HResult;StdCall;
// IUnknown// Ignore referance countingfunction _AddRef: Integer; stdcall;
function _Release: Integer; stdcall;
public{ public declarations }end;
var
Form1: TForm1;
implementation{$R *.lfm}{ TForm1 }procedure TForm1.FormCreate(Sender: TObject);
begin
OleInitialize(nil);
OleCheck(RegisterDragDrop(Handle, Self));
end;
procedure TForm1.FormDestroy(Sender: TObject);
begin
RevokeDragDrop(Handle);
OleUninitialize;
end;
function TForm1.DragEnter(const dataObj: IDataObject; grfKeyState: DWORD;
pt: TPoint; var dwEffect: DWORD): HResult; StdCall;
begin
dwEffect := DROPEFFECT_COPY;
Result := S_OK;
end;
function TForm1.DragOver(grfKeyState: DWORD; pt: TPoint; var dwEffect: DWORD
): HResult; StdCall;
begin
dwEffect := DROPEFFECT_COPY;
Result := S_OK;
end;
function TForm1.DragLeave: HResult; StdCall;
begin
Result := S_OK;
end;
function TForm1._AddRef: Integer; stdcall;
begin
Result := 1;
end;
function TForm1._Release: Integer; stdcall;
begin
Result := 1;
end;
function TForm1.Drop(const dataObj: IDataObject; grfKeyState: DWORD;
pt: TPoint; var dwEffect: DWORD): HResult; StdCall;
var
aFmtEtc: TFORMATETC;
aStgMed: TSTGMEDIUM;
pData: PChar;
begin{Make certain the data rendering is available}if (dataObj = nil) thenraise Exception.Create(‘IDataObject-Pointer is not valid!‘);
with aFmtEtc dobegin
cfFormat := CF_TEXT;
ptd := nil;
dwAspect := DVASPECT_CONTENT;
lindex := -1;
tymed := TYMED_HGLOBAL;
end;
{Get the data}
OleCheck(dataObj.GetData(aFmtEtc, aStgMed));
try{Lock the global memory handle to get a pointer to the data}
pData := GlobalLock(aStgMed.hGlobal);
{ Replace Text }
Memo1.Text := pData;
finally{Finished with the pointer}
GlobalUnlock(aStgMed.hGlobal);
{Free the memory}
ReleaseStgMedium(aStgMed);
end;
Result := S_OK;
end;
end.
Source forum: http://forum.lazarus.freepascal.org/index.php/topic,25769.msg156933.html#msg156933
原文：http://www.cnblogs.com/yzryc/p/6408385.html
内容总结
以上是互联网集市为您收集整理的delphi Drag and Drop sample 鼠标拖放操作实例全部内容，希望文章能够帮你解决delphi Drag and Drop sample 鼠标拖放操作实例所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。