基于apache整合svn服务器，基于mysql对用户认证

运行环境：

        系统环境
# uname -sr
Linux 2.6.32-504.16.2.el6.centos.plus.x86_64
# cat /etc/issue
CentOS release 6.6 (Final)
 
Apache:
 httpd-2.4.12
 
svn：
 subversion-1.8.13
 
MySQL相关: 
 mariadb-10.0.17-linux-x86_64
 mod_auth_mysql-3.0.0
 
其他依赖环境
 pcre-8.37
 serf-1.3.8
 scons-2.3.4
 sqlite-autoconf-3081002

    

编译安装pcre

        # cd /opt
# wget -c ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.bz2
# tar xf pcre-8.37.tar.bz2
# cd pcre-8.37
# ./configure --prefix=/usr/local/pcre                    \
            --enable-unicode-properties       \
            --enable-pcre16                   \
            --enable-pcre32                   \
            --enable-pcregrep-libz            \
            --enable-pcregrep-libbz2          \
            --enable-pcretest-libreadline     \
            --disable-static                  &&
make
 
# make install

    

编译安装apr

        # cd /opt
# wget -c http://mirrors.hust.edu.cn/apache//apr/apr-1.5.2.tar.gz
# tar xf apr-1.5.2.tar.gz
# cd  apr-1.5.2
# ./configure --prefix=//usr/local/apr
# make && make install

    

编译安装apr-util

        # cd /opt
# wget -c http://mirrors.hust.edu.cn/apache//apr/apr-util-1.5.4.tar.gz
# tar xf apr-util-1.5.4.tar.gz
# cd  apr-util-1.5.4
# ./configure --prefix=/usr/local/apr-util --with-apr=/usr/local/apr
# make && make install

    

编译安装httpd

        # cd /opt
# wget -c http://mirror.bit.edu.cn/apache//httpd/httpd-2.4.12.tar.gz
# tar xf httpd-2.4.12.tar.gz
# cd httpd-2.4.12
# ./configure --prefix=/usr/local/apache --with-mpm=event --enable-mods-shared=all --enable-so --enable-most --enable-max --enable-rewrite=shared --enable-speling=shared --enable-deflate=shared --enable-cache=shared --enable-file-cache=shared --enable-proxy=shared --enable-cache --enable-disk-cache --enable-mem-cache --enable-file-cache --enable-proxy-ajp=shared --enable-proxy-balancer=shared --enable-ssl --with-pcre --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util --enable-authn-dbd --enable-authn-dbd --enable-authn-dbd --enable-dav-fs --enable-dav-lock
# make 
# make install

    

二进制源码包安装MairaDB

   详细安装请参考mysql相关博客

安装MySQL认证模块

        # cd /opt
# wget -c http://nchc.dl.sourceforge.net/project/modauthmysql/modauthmysql/3.0.0/mod_auth_mysql-3.0.0.tar.gz
# tar xf mod_auth_mysql-3.0.0.tar.gz
# wget -c http://sourceforge.net/p/modauthmysql/patches/13/attachment/mod_auth_mysql_3.0.0_patch_apache2.4.diff
# patch -p0 < mod_auth_mysql_3.0.0_patch_apache2.4.diff
# ln -sv /usr/local/mysql/lib /usr/lib/mysql
# ln -sv /usr/local/mysql/include/mysql /usr/include/mysql
# /usr/local/apache/bin/apxs -c -L/usr/lib/mysql -I/usr/include/mysql -lmysqlclient -lm -lz mod_auth_mysql.c
# /usr/local/apache/bin/apxs -i mod_auth_mysql.la
验证是否mod_auth_mysql.so成功生成
# ls /usr/local/apache/modules/ -l | grep mysql
-rwxr-xr-x 1 root root     294 May 25 00:42 mod_auth_mysql.lo
-rwxr-xr-x 1 root root   93744 May 25 00:42 mod_auth_mysql.o
-rwxr-xr-x 1 root root   66194 May 25 00:42 mod_auth_mysql.so

    

编译安装svn

        编译安装serf
# cd /opt
# wget http://cznic.dl.sourceforge.net/project/scons/scons/2.3.4/scons-2.3.4.tar.gz
# tar xf scons-2.3.4.tar.gz
# cd scons-2.3.4
# python ./setup.py  install
# cd /opt
# wget http://fossies.org/linux/www/serf-1.3.8.tar.gz
# tar xf serf-1.3.8.tar.gz
# cd serf-1.3.8
# scons PREFIX=/usr/local/serf install
# cd /opt
# wget -c http://mirrors.cnnic.cn/apache/subversion/subversion-1.8.13.tar.gz
# tar xf subversion-1.8.13.tar.gz
# cd subversion-1.8.13
# ./configure  --prefix=/usr/local/subversion --with-sqlite=/usr/local/sqlite --with-apr=/usr/local/apr --with-apxs=/usr/
local/apache/bin/apxs‘ --with-apr-util=/usr/local/apr-util --with-openssl --with-zlib --enable-maintainer-mode --withou
t-berkeley-db --enable-shared --enable-static --with-serf=/usr/local/serf
# make
# make install

    

新建一个测试svn仓库

        # mkdir -p /data/svn
# /usr/local/subversion/bin/svnadmin create /data/svn/Repertory

    

/data/svn创建用户权限控制文件

        # vim /data/svn/authz 
 
[groups]
admin = zkg,test,test2,test3
[Repertory:/]
@admin = rw
[test:/]
@admin = rw
[tools:/]
@admin = rw
[hongjiaosuo:/]
@admin = rw

    

        
            
配置认证数据库
mysql> create database svn_auth;
Query OK, 1 row affected (0.00 sec)
mysql> use svn_auth;
Database changed
mysql> grant all privileges on svn.* to svn@‘%‘ identified by ‘svn‘ with grant option;
Query OK, 0 rows affected (0.00 sec)
mysql> CREATE TABLE users 
    -> (
    ->   user_name CHAR(30) NOT NULL,
    ->   user_passwd CHAR(20) NOT NULL,
    ->   PRIMARY KEY (user_name)    
    -> );
Query OK, 0 rows affected (0.01 sec)
 
mysql> insert into svn_auth.users values(‘test‘,encrypt(‘123456‘));
Query OK, 1 row affected (0.00 sec)
 
mysql> insert into svn_auth.users values(‘test2‘,encrypt(‘123456‘));
Query OK, 1 row affected (0.01 sec)
 
mysql> insert into svn_auth.users values(‘test3‘,encrypt(‘123456‘));
Query OK, 1 row affected (0.00 sec)

    

整合httpd启用svn模块

        

        ServerRoot "/usr/local/apache"

#Listen 12.34.56.78:80
Listen 8080
#
# Dynamic Shared Object (DSO) Support
# Example:
# LoadModule foo_module modules/mod_foo.so
#
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_form_module modules/mod_auth_form.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule allowmethods_module modules/mod_allowmethods.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule cache_disk_module modules/mod_cache_disk.so
LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule socache_dbm_module modules/mod_socache_dbm.so
LoadModule socache_memcache_module modules/mod_socache_memcache.so
LoadModule watchdog_module modules/mod_watchdog.so
LoadModule macro_module modules/mod_macro.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule echo_module modules/mod_echo.so
LoadModule buffer_module modules/mod_buffer.so
LoadModule data_module modules/mod_data.so
LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule reflector_module modules/mod_reflector.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule sed_module modules/mod_sed.so
LoadModule charset_lite_module modules/mod_charset_lite.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule xml2enc_module modules/mod_xml2enc.so
LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_debug_module modules/mod_log_debug.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule session_module modules/mod_session.so
LoadModule session_cookie_module modules/mod_session_cookie.so
LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule heartbeat_module modules/mod_heartbeat.so
LoadModule heartmonitor_module modules/mod_heartmonitor.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dav_lock_module modules/mod_dav_lock.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
LoadModule mysql_auth_module modules/mod_auth_mysql.so

<IfModule unixd_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon
</IfModule>
# ‘Main‘ server configuration
#
# The directives in this section set up the values used by the ‘main‘
# server, which responds to any requests that aren‘t handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn‘t have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80
#
# Deny access to the entirety of your server‘s filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />
   
    Options FollowSymLinks
    AllowOverride none
#   Require all denied
    Require all granted
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something‘s not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
#DocumentRoot "/usr/local/apache/htdocs"
#<Directory "/usr/local/apache/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn‘t give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
#    Options Indexes FollowSymLinks
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   AllowOverride FileInfo AuthConfig Limit
    #
#    AllowOverride None
    #
    # Controls who can get stuff from this server.
    #
#    Require all granted
#</Directory>
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>
#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<Files ".ht*">
    Require all denied
</Files>
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host‘s errors will be logged there and not here.
#
ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel info
<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access_log" common
    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server‘s namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock cgisock
</IfModule>
#
# "/usr/local/apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/apache/cgi-bin">
    AllowOverride None
    Options None
    Require all granted
</Directory>
<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types
    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values ‘default‘, ‘none‘ or ‘unlimited‘.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall may be used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf
# Language settings
#Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
#Include conf/extra/httpd-default.conf

Include conf/extra/httpd-svn.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
#
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>

    

重启httpd

        /usr/local/apache/bin/httpd -k restart 

    

测试

650) this.width=650;" src="/upload/getfiles/default/2022/11/13/20221113022304156.jpg" title="svn仓库测试" />

650) this.width=650;" src="/upload/getfiles/default/2022/11/13/20221113022304528.jpg" title="2.png" />

本文出自 “Linux之旅” 博客，请务必保留此出处http://openlinuxfly.blog.51cto.com/7120723/1671273

原文：http://openlinuxfly.blog.51cto.com/7120723/1671273