华为eNSP配置静态IP实验

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了华为eNSP配置静态IP实验，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含11936字，纯文字阅读大概需要18分钟。

内容图文

拓扑图如下：

技术分享图片

（1）R1的配置

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sysname R1
Oct 22 2019 17:37:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 12.0.0.1 24
Oct 22 2019 17:38:21-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R1-GigabitEthernet0/0/0]un sh
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R1-GigabitEthernet0/0/0]
Oct 22 2019 17:38:26-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 13.0.0.1 24
Oct 22 2019 17:38:48-08:00 R1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R1-GigabitEthernet0/0/1]un sh
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R1-GigabitEthernet0/0/1]
Oct 22 2019 17:38:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1-GigabitEthernet0/0/1]int loo 0
Oct 22 2019 17:39:06-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1-LoopBack0]ip add 1.1.1.1 32
[R1-LoopBack0]q
Oct 22 2019 17:39:26-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R1]dis ip int b
*down: administratively down
!down: FIB overload down
^down: standby
(l): loopback
(s): spoofing
(d): Dampening Suppressed
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 8
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 8

Interface                         IP Address/Mask      Physical   Protocol  
Ethernet0/0/0                     unassigned           down       down      
Ethernet0/0/1                     unassigned           down       down      
GigabitEthernet0/0/0              12.0.0.1/24          up         up        
GigabitEthernet0/0/1              13.0.0.1/24          up         up        
GigabitEthernet0/0/2              unassigned           down       down      
GigabitEthernet0/0/3              unassigned           down       down      
LoopBack0                         1.1.1.1/32           up         up(s)     
NULL0                             unassigned           up         up(s)     
Serial0/0/0                       unassigned           down       down      
Serial0/0/1                       unassigned           down       down      
Serial0/0/2                       unassigned           down       down      
Serial0/0/3                       unassigned           down       down      
[R1] User interface con0 is availabl
[R1]ip route-static 3.3.3.3 32 13.0.0.3
[R1]ip route-static 3.3.3.3 32 12.0.0.2
[R1]ip route-static 2.2.2.2 32 13.0.0.3
[R1]ip route-static 2.2.2.2 32 12.0.0.2
[R1]ip route-static 23.0.0.0 24 13.0.0.3
[R1]ip route-static 23.0.0.0 24 12.0.0.2
[R1]
Oct 22 2019 18:32:59-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095.
[R1] User interface con0 is available
[R1]dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 13       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack0
        2.2.2.2/32  Static  60   0          RD   13.0.0.3        GigabitEthernet
0/0/1
                    Static  60   0          RD   12.0.0.2        GigabitEthernet
0/0/0
        3.3.3.3/32  Static  60   0          RD   13.0.0.3        GigabitEthernet
0/0/1
                    Static  60   0          RD   12.0.0.2        GigabitEthernet
0/0/0
       12.0.0.0/24  Direct  0    0           D   12.0.0.1        GigabitEthernet
0/0/0
       12.0.0.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
       13.0.0.0/24  Direct  0    0           D   13.0.0.1        GigabitEthernet
0/0/1
       13.0.0.1/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
       23.0.0.0/24  Static  60   0          RD   13.0.0.3        GigabitEthernet
0/0/1
                    Static  60   0          RD   12.0.0.2        GigabitEthernet
0/0/0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R1]

（2）R2的配置

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys 
[Huawei]sysname R2
[R2]
[R2]int g
Oct 22 2019 17:39:56-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 1, the ch
ange loop count is 0, and the maximum number of records is 
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24
[R2-GigabitEthernet0/0/0]
Oct 22 2019 17:40:32-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/0 has entered the UP state.
[R2-GigabitEthernet0/0/0]un sh
Info: Interface GigabitEthernet0/0/0 is not shutdown.
[R2-GigabitEthernet0/0/0]
Oct 22 2019 17:40:36-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2-GigabitEthernet0/0/0]int g0/0/2
[R2-GigabitEthernet0/0/2]ip add 23.0.0.2 24
[R2-GigabitEthernet0/0/2]
Oct 22 2019 17:40:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state.
[R2-GigabitEthernet0/0/2]u
Oct 22 2019 17:40:56-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.n sh
Info: Interface GigabitEthernet0/0/2 is not shutdown.
[R2-GigabitEthernet0/0/2]
[R2-GigabitEthernet0/0/2]int loo 0
[R2-LoopBack0]ip
Oct 22 2019 17:41:06-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 4, the ch
ange loop count is 0, and the maximum number of records is 4095.
                 ^
Error:Incomplete command found at ‘^‘ position.
[R2-LoopBack0]ip add 2.2.2.2 32
[R2-LoopBack0]q
[R2]dis ip int b
*down: administratively down
!down: FIB overload down
^down: standby
(l): loopback
(s): spoofing
(d): Dampening Suppressed
The number of interface that is UP in Physical is 4
The number of interface that is DOWN in Physical is 8
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 8

Interface                         IP Address/Mask      Physical   Protocol  
Ethernet0/0/0                     unassigned           down       down      
Ethernet0/0/1                     unassigned           down       down      
GigabitEthernet0/0/0              12.0.0.2/24          up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              23.0.0.2/24          up         up        
GigabitEthernet0/0/3              unassigned           down       down      
LoopBack0                         2.2.2.2/32           up         up(s)     
NULL0                             unassigned           up         up(s)     
Serial0/0/0                       unassigned           down       down      
Serial0/0/1                       unassigned           down       down      
Serial0/0/2                       unassigned           down       down      
Serial0/0/3                       unassigned           down       down      
[R2]
Oct 22 2019 17:41:26-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R2]
[R2]ip route-static 1.1.1.1 32 12.0.0.1
[R2]ip route-static 1.1.1.1 32 23.0.0.3
[R2]ip route-static 3.3.3.3 32 12.0.0.1
[R2]ip route-static 3.3.3.3 32 23.0.0.3
[R2]ip route-static 13.0.0.0 24 23.0.0.3
[R2]ip route-static 13.0.0.0 24 12.0.0.1
[R2]
Oct 22 2019 18:33:18-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 11, the c
hange loop count is 0, and the maximum number of records is 4095.
[R2]
[R2] User interface con0 is available
[R2]dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 10       Routes : 13       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Static  60   0          RD   12.0.0.1        GigabitEthernet
0/0/0
                    Static  60   0          RD   23.0.0.3        GigabitEthernet
0/0/2
        2.2.2.2/32  Direct  0    0           D   127.0.0.1       LoopBack0
        3.3.3.3/32  Static  60   0          RD   12.0.0.1        GigabitEthernet
0/0/0
                    Static  60   0          RD   23.0.0.3        GigabitEthernet
0/0/2
       12.0.0.0/24  Direct  0    0           D   12.0.0.2        GigabitEthernet
0/0/0
       12.0.0.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/0
       13.0.0.0/24  Static  60   0          RD   23.0.0.3        GigabitEthernet
0/0/2
                    Static  60   0          RD   12.0.0.1        GigabitEthernet
0/0/0
       23.0.0.0/24  Direct  0    0           D   23.0.0.2        GigabitEthernet
0/0/2
       23.0.0.2/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/2
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R2]

（3）R3的配置

<R3>sys
Enter system view, return user view with Ctrl+Z.
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 13.0.0.3 24
[R3-GigabitEthernet0/0/1]
Oct 22 2019 18:31:33-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP 
on the interface GigabitEthernet0/0/1 has entered the UP state.
[R3-GigabitEthernet0/0/1]un sh
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[R3-GigabitEthernet0/0/1]
[R3-GigabitEthernet0/0/1]
Oct 22 2019 18:31:39-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 2, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-GigabitEthernet0/0/1]int g0/0/2
[R3-GigabitEthernet0/0/2]ip add 23.0.0.3 24
[R3-GigabitEthernet0/0/2]
Oct 22 2019 18:31:55-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP 
on the interface GigabitEthernet0/0/2 has entered the UP state.
Oct 22 2019 18:31:59-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 3, the ch
ange loop count is 0, and the maximum number of records is 4095.
[R3-GigabitEthernet0/0/2]un sh
Info: Interface GigabitEthernet0/0/2 is not shutdown.
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]
[R3-GigabitEthernet0/0/2]q
[R3]dis ip int b
*down: administratively down
!down: FIB overload down
^down: standby
(l): loopback
(s): spoofing
(d): Dampening Suppressed
The number of interface that is UP in Physical is 3
The number of interface that is DOWN in Physical is 8
The number of interface that is UP in Protocol is 3
The number of interface that is DOWN in Protocol is 8

Interface                         IP Address/Mask      Physical   Protocol  
Ethernet0/0/0                     unassigned           down       down      
Ethernet0/0/1                     unassigned           down       down      
GigabitEthernet0/0/0              unassigned           down       down      
GigabitEthernet0/0/1              13.0.0.3/24          up         up        
GigabitEthernet0/0/2              23.0.0.3/24          up         up        
GigabitEthernet0/0/3              unassigned           down       down      
NULL0                             unassigned           up         up(s)     
Serial0/0/0                       unassigned           down       down      
Serial0/0/1                       unassigned           down       down      
Serial0/0/2                       unassigned           down       down      
Serial0/0/3                       unassigned           down       down      
[R3]
[R3]ip route-static 1.1.1.1 32 13.0.0.1
[R3]ip route-static 1.1.1.1 32 23.0.0.2
[R3]ip route-static 2.2.2.2 32 13.0.0.1
[R3]ip route-static 2.2.2.2 32 23.0.0.2
[R3]ip route-static 12.0.0.0 24 23.0.0.2
[R3]ip route-static 12.0.0.0 24 13.0.0.1
[R3]dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 9        Routes : 12       

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Static  60   0          RD   13.0.0.1        GigabitEthernet
0/0/1
                    Static  60   0          RD   23.0.0.2        GigabitEthernet
0/0/2
        2.2.2.2/32  Static  60   0          RD   13.0.0.1        GigabitEthernet
0/0/1
                    Static  60   0          RD   23.0.0.2        GigabitEthernet
0/0/2
       12.0.0.0/24  Static  60   0          RD   23.0.0.2        GigabitEthernet
0/0/2
                    Static  60   0          RD   13.0.0.1        GigabitEthernet
0/0/1
       13.0.0.0/24  Direct  0    0           D   13.0.0.3        GigabitEthernet
0/0/1
       13.0.0.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/1
       23.0.0.0/24  Direct  0    0           D   23.0.0.3        GigabitEthernet
0/0/2
       23.0.0.3/32  Direct  0    0           D   127.0.0.1       GigabitEthernet
0/0/2
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0

[R3]

原文：https://blog.51cto.com/14449541/2444573

内容总结

以上是互联网集市为您收集整理的华为eNSP配置静态IP实验全部内容，希望文章能够帮你解决华为eNSP配置静态IP实验所遇到的程序开发问题。如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容，请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

扫描二维码推送至手机访问。

本文链接：https://qyyshop.com/info/1209801.html

来源：【匿名】

【上一篇】vs2010启动越来越慢解决方法【下一篇】关于IE的RegExp.exec的问题

更多 ►

【华为eNSP配置静态IP实验】教程文章相关的互联网学习教程文章

??关于静态成员变量和成员函数，详解请看：点击打开链接如果class内含const static integral data member，那么根据C++标准规格，我们可以在class之内直接给予初值。所谓integral泛指所有整数型别，不单只是指int。例如：#include <vector>#include <algorithm>#include <iostream> using namespace std; template <typename T>class print{ public: staticconst int datai = 5;//整数型别 staticcon...

如何在静态编译的QT 5.5.1 中使用数据库插件连接 ODBC（调用静态插件）【代码】

说做就做，按着官方网站的说明，无脑照搬步骤编译出来了静态版本，但是在使用的时候出问题了：运行的时候提示: "Driver not loaded Driver not loaded"Available drivers: "QSQLITE" 擦，原来默认没把odbc的驱动编译进去，好吧，按照Qt帮助文档的说明编译出了 libqsqlodbcd.a 、libqsqlodbc.a这两个文件，然后想当然地把这两个文件放到 %QT/plugins的sqldrivers文件夹下，你猜怎么着，根本就没有这个文件夹！好吧，既然没有...

Objective-C - 动态方法、静态属性实例【代码】

设计”狗”类/*设计一个”狗“类1> 属性* 颜色* 速度（单位是m/s）* 性别* 体重（单位是kg）2> 行为* 吃：每吃一次，体重增加0.5kg，输出吃完后的体重* 吠（叫）：输出所有的属性* 跑：每跑一次，体重减少0.5kg，输出速度和跑完后的体重* 比较颜色：跟别的狗比较颜色，如果一样，返回YES，不一样，返回NO* 比较速度：跟别的狗比较速度，返回速度差（自己的速度 - 其他狗的速度） */#import <Foundation/Foundation.h>// 颜色typede...

华为eNSP配置静态IP实验【代码】【图】

拓扑图如下：（1）R1的配置<Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 Oct 22 2019 17:37:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 1, the ch ange loop count is 0, and the maximum number of records is 4095. [R1]int g0/0/0 [R1-GigabitEthernet0/0/0]ip add 12.0.0.1 24 Oct 22 2...

静态文件 static【代码】【图】

一、常见的形式　　前面初步搭建Django开局时候就在项目路径下建立了statics 文件夹，然后在 settings.py 文件的末尾添加了 statics 文件夹的绝对路径。# 这个可以给模板文件使用，当statics 文件夹路径有变化，或者添加了其他的文件， #所有的模板使用了静态文件就不需要修改引用路径，相当于所有静态文件的别名 STATIC_URL = ‘/static/‘# 这个是真正的静态文件路径，静态文件在几个路径下就添加几个，后续可能增加图片路...

静态内部类：一次遍历求最大最小值（代码示例）

public class StaticInnerClassTest{ 　　public static void main(String[] args){ 　　　　double[] d = new double[20]; 　　　　for(int i = 0;i < d.length;i++) 　　　　　　d[i] = 100*Math.random(); 　　　　ArrayAlg.Pair p = ArrayAlg.minmax(d); 　　　　System.out.println("min = " + p.getFirst()); 　　　　System.out.println("max = " + p.getSecond()); 　　}}class ArrayAlg{ 　　public static class ...

springmvc06 静态资源【代码】

六、静态资源6.1 静态资源问题静态资源：html，js文件，css文件，图片文件静态文件没有url-pattern,所以默认是访问不到的，之所以可以访问，是因为，tomcat中有一个全局的servlet：org.apache.catalina.servlets.DefaultServlet，它的url-pattern是 “/”,是全局默认的Servlet. 所以每个项目中不能匹配的静态资源的请求，有这个Servlet来处理即可。但，在SpringMVC中DispatcherServlet也采用了 “/” 作为url-pattern, 则项目中不会...

说一说进程状态转换图，动态就绪，静态就绪，动态阻塞，静态阻塞【图】

进程的五态模型活动阻塞，静止阻塞，活动就绪，静止就绪出现这些状态的原因 ?内存资源比较紧张，将暂时不能/用运行的进程换出到外存，来腾出足够的内存空间。将已经具备运行条件的进程所需的数据和程序换入到内存。挂起 ?进程被交换到外存分类 ●活动阻塞：进程在内存，阻塞了 ●静止阻塞：进程在外存，阻塞了 ●活动就绪：进程在内存，处于就绪状态，等待运行 ●静止就绪：进程在外存，处于就绪状态，只要调度到内存，就可以等...

c – 如何知道指针指向动态或静态分配的内存【代码】

有没有办法知道指针是指向动态分配的内存还是静态分配的内存？数组作为指向函数的指针传递void func (int* p) {if( p ){cout << p[0] << p[1] ;...// func has a responsibility to deallocate what p is pointing} }int main() {int a[] = {10, 20, 30, 50};func(a);...return 0; }如果解除分配的所有权转移到func.func p如何知道’p’是指向动态分配的内存还是静态分配的内存？解决方法:你不可能知道这一点.这是您的功能定义.更...

01.07 SpringMVC的常见应用之静态资源处理【代码】【图】

一、静态资源处理其实我们在有些时候在Web项目中使用静态资源文件（html、css、js、图片资源等）。当我们添加了html页面访问的时候就会发现404 原因：是因为自己写的web.xml中的信息覆盖了Tomcat默认的配置解决办法：方法1：我们在自己的web.xml专门制定不用覆盖的请求类型 <servlet-mapping><servlet-name>default</servlet-name><url-pattern>*.html</url-pattern></ser...

从spring源码分析为什么类的静态属性不能依赖注入【图】

bean类的静态属性是不能通过spring自动依赖注入的，这个从spring的源码可以看出来，spring在进行bean的属性注入时，有以下判断条件，如果属性是用static修饰的，就不能自动注入。可以使用如下方式进行值的注入，方法也不能使用static修饰： private static String aStr; @Value("${spring.a}") private void setAstr(String a) { aStr = a; }

SQL之三Listener动态监听静态监听注册实例(The listener supports no services解决)【代码】【图】

本篇内容来自http://blog.sina.com.cn/s/blog_654c5f710101i6dw.html Listener动态监听静态监听注册实例今天做Advacned Replication实验的时候碰到一个问题，启动目标库监听时，出现The listener supports no services[oracle@adrep ~]$ lsnrctl startLSNRCTL for Linux: Version 11.2.0.3.0 - Production on 14-SEP-2013 10:11:38Copyright (c) 1991, 2011, Oracle. All rights reserved.Starting /u01/app/oracle/product/11...

静态路由与默认路由【图】

静态路由原理与配置一、路由概述路由器(Router)是一种负责寻径、转发的网络层设备，它从网络中选取一条最佳的通信路径提供给客户。路由器可连接几个分开的网络，用过IP逻辑地址连接到一起。路由器通过路由表转发数据，路由表中记录着网络地址以及各地址之间距离的清单，路由器利用路由表清单选择最佳转发路径。路由器使用时间最少和路径最短的算法进行工作，用以保证当某条路径发生故障断开或者出现拥堵是仍能正常通信。通过端口...

springboot加载resouce下面的静态文件【图】

一 springboot加载resouces下的静态文件 1.1 静态问文件的访问规则参考之前的博文：https://blog.csdn.net/u011066470/article/details/88375178 引入依赖 Thymeleaf <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-thymeleaf</artifactId> </dependency> 注意1：如果不引人这个依赖包，html页面直接放在resouce的根目录下，则无...

《数据库系统概念》14-静态散列

顺序文件组织的缺点之一是必须通过访问索引或使用二分法搜索来定位数据，这需要较多的I/O操作。基于散列技术的文件组织方式则不需要访问索引结构，散列也提供了一种组织索引的方式。在散列(hash)技术中，用桶(bucket)来表示能存储一条或多条记录的存储单元。如果K代表所有搜索码的集合，B代表所有bucket的集合，则散列函数h表示一个从K到B的映射函数。插入搜索码为Ki的记录时，通过散列函数计算h(Ki)得出bucket的地址，如果这个buc...

首页 / 更多教程 / 华为eNSP配置静态IP实验

华为eNSP配置静态IP实验

内容导读

内容图文

（1）R1的配置

（2）R2的配置

（3）R3的配置

内容总结

内容备注

内容手机端

【华为eNSP配置静态IP实验】教程文章相关的互联网学习教程文章

静态常量整数成员在class内部直接初始化

如何在静态编译的QT 5.5.1 中使用数据库插件连接 ODBC（调用静态插件）【代码】

Objective-C - 动态方法、静态属性实例【代码】

华为eNSP配置静态IP实验【代码】【图】

静态文件 static【代码】【图】

静态内部类：一次遍历求最大最小值（代码示例）

springmvc06 静态资源【代码】

说一说进程状态转换图，动态就绪，静态就绪，动态阻塞，静态阻塞【图】

c – 如何知道指针指向动态或静态分配的内存【代码】

01.07 SpringMVC的常见应用之静态资源处理【代码】【图】

从spring源码分析为什么类的静态属性不能依赖注入【图】

SQL之三Listener动态监听静态监听注册实例(The listener supports no services解决)【代码】【图】

静态路由与默认路由【图】

springboot加载resouce下面的静态文件【图】

《数据库系统概念》14-静态散列

静态 - 相关标签

配置 - 相关标签

更多教程 - 最新教程

更多教程 - 最热教程