首页 / UBUNTU / ROS-Jade版在UbuntuKylin15.04上的源码安装

ROS-Jade版在UbuntuKylin15.04上的源码安装

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了ROS-Jade版在UbuntuKylin15.04上的源码安装，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含9138字，纯文字阅读大概需要14分钟。

内容图文

ROS-Installing from source

Install from source requires that you download and compile the source code on your own. ROS Jade supports Trusty, Utopic, and Vivid. Other platforms are possible to use but are not expected to work out of the box. Target platforms are defined in REP 3

目录

  1. Installing from source

    1. Update the workspace

    2. Rebuild your workspace

    3. Building the catkin Packages

    4. Installing bootstrap dependencies

    5. Initializing rosdep

    6. Prerequisites

    7. Installation

    8. Maintaining a Source Checkout

Prerequisites

Installing bootstrap dependencies

Install bootstrap dependencies (Ubuntu):

These tools are used to facilitate the download and management of ROS packages and their dependencies, among other things.

Ubuntu: 

  • $ sudo apt-get install python-rosdep python-rosinstall-generator python-wstool python-rosinstall build-essential

    If you have trouble installing the packages in the command above, make sure you have added the packages.ros.org debian repository to your apt source lists as described starting here: jade/Installation/Ubuntu#jade.2BAC8-Installation.2BAC8-Sources.Setup_your_sources.list

    If apt complains that the python-support package is not installable, make sure that you have the Ubuntu universe repositories enabled in your /etc/apt/sources.list

Fedora: 

  • $ sudo yum install python-rosdep python-rosinstall_generator python-wstool python-rosinstall @buildsys-build

    Some packages used in ROS are not currently available in the Fedora RPM repositories. Most of the other packages are available in RPM Fusion. See RPM Fusion Command Line Setup.

    Any packages not available in RPM Fusion are staged in the SDSM&T ROS RPM staging repository, which is available from csc.mcs.sdsmt.edu.

Generic (pip):

  • If you are using a non-Debian system you need to make sure that you have all build tools (compiler, CMake, etc.) installed. You can install all ROS Python tools via PIP:

    $ sudo pip install -U rosdep rosinstall_generator wstool rosinstall

    If there are errors with this or the rosdep step below, your system‘s version of pip may be out-of-date. Use your system‘s package management to update it, or use it to update itself:

    $ sudo pip install --upgrade setuptools

    Note that on many platforms such as OSX you may want to install the above packages and use ROS inside a virtualenv so as to make sure not to collide with system dependencies.

Initializing rosdep

$ sudo rosdep init$ rosdep update

Installation

Start by building the core ROS packages.

Building the catkin Packages

ROS is in the process of converting to a new build system, catkin, but not all of the packages have been converted and the two build systems cannot be used simultaneously. Therefore it is necessary to build the core ROS packages first (catkin packages) and then the rest.

Create a catkin Workspace

In order to build the core packages, you will need a catkin workspace. Create one now:

  • $ mkdir ~/ros_catkin_ws$ cd ~/ros_catkin_ws

Next we will want to fetch the core packages so we can build them. We will use wstool for this. Select the wstool command for the particular variant you want to install:

Desktop-Full Install: ROS, rqt, rviz, robot-generic libraries, 2D/3D simulators, navigation and 2D/3D perception

  • $ rosinstall_generator desktop_full --rosdistro jade --deps --wet-only --tar > jade-desktop-full-wet.rosinstall$ wstool init -j8 src jade-desktop-full-wet.rosinstall

Desktop Install (recommended): ROS, rqt, rviz, and robot-generic libraries

  • $ rosinstall_generator desktop --rosdistro jade --deps --wet-only --tar > jade-desktop-wet.rosinstall$ wstool init -j8 src jade-desktop-wet.rosinstall

ROS-Comm: (Bare Bones) ROS package, build, and communication libraries. No GUI tools.

  • $ rosinstall_generator ros_comm --rosdistro jade --deps --wet-only --tar > jade-ros_comm-wet.rosinstall$ wstool init -j8 src jade-ros_comm-wet.rosinstall

This will add all of the catkin or wet packages in the given variant and then fetch the sources into the ~/ros_catkin_ws/src directory. The command will take a few minutes to download all of the core ROS packages into the src folder. The -j8 option downloads 8 packages in parallel.

In addition to the 3 variants above, more are defined in REP 131 such as robot, perception, etc. Just change the package path to the one you want, e.g., for robot do:

$ rosinstall_generator robot --rosdistro jade --deps --wet-only --tar > jade-robot-wet.rosinstall$ wstool init -j8 src jade-robot-wet.rosinstall

If wstool init fails or is interrupted, you can resume the download by running:

wstool update -j 4 -t src

Resolving Dependencies

Before you can build your catkin workspace you need to make sure that you have all the required dependencies. We use the rosdep tool for this:

  • $ rosdep install --from-paths src --ignore-src --rosdistro jade -y

This will look at all of the packages in the src directory and find all of the dependencies they have. Then it will recursively install the dependencies.

The --from-paths option indicates we want to install the dependencies for an entire directory of packages, in this case src. The --ignore-src option indicates to rosdep that it shouldn‘t try to install any ROS packages in the src folder from the package manager, we don‘t need it to since we are building them ourselves. The --rosdistro option is required because we don‘t have a ROS environment setup yet, so we have to indicate to rosdep what version of ROS we are building for. Finally, the -y option indicates to rosdep that we don‘t want to be bothered by too many prompts from the package manager.

After a while (and maybe some prompts for your password) rosdep will finish installing system dependencies and you can continue.

Building the catkin Workspace

Once it has completed downloading the packages and resolving the dependencies you are ready to build the catkin packages. We will use the catkin_make_isolated command because there are both catkin and plain cmake packages in the base install, when developing on your catkin only workspaces you should use catkin/commands/catkin_make.

Invoke catkin_make_isolated:

  • $ ./src/catkin/bin/catkin_make_isolated --install -DCMAKE_BUILD_TYPE=Release

Note: You might want to select a different CMake build type (e.g. RelWithDebInfo or Debug, see http://cmake.org/cmake/help/v2.8.12/cmake.html#variable:CMAKE_BUILD_TYPE).

Note: The default catkin installation location would be ~/ros_catkin_ws/install_isolated, if you would like to install some where else then you can do this by adding the --install-space /opt/ros/jade argument to your catkin_make_isolated call.

For usage on a robot without Ubuntu, it is recommended to install compiled code into /opt/ros/jade just as the Ubuntu packages would do. Don‘t do this in Ubuntu, as the packages would collide with apt-get packages. It is also possible to install elsewhere (e.g. /usr), but it is not recommended unless you really know what you are doing.

Please see REP 122: Filesystem Hierarchy Layout for more detailed documentation on how the installed files are placed.

Note: In the above command we are running the catkin_make_isolated command from the catkin source folder because it has not been installed yet, once installed it can be called directly.

Now the packages should have been installed to ~/ros_catkin_ws/install_isolated or to wherever you specified with the --install-space argument. If you look in that directory you will see that a setup.bash file have been generated. To utilize the things installed there simply source that file. Lets do that now before building the rest of ROS:

  • $ source ~/ros_catkin_ws/install_isolated/setup.bash

Maintaining a Source Checkout

If we want to keep our source checkout up to date, we will have to periodically update our rosinstall file, download the latest sources, and rebuild our workspace.

Update the workspace

To update your workspace, first move your existing rosinstall file so that it doesn‘t get overwritten, and generate an updated version. For simplicity, we will cover the *destop-full* variant. For other variants, update the filenames and rosinstall_generator arguments appropriately.

$ mv -i jade-desktop-full-wet.rosinstall jade-desktop-full-wet.rosinstall.old$ rosinstall_generator desktop_full --rosdistro jade --deps --wet-only --tar > jade-desktop-full-wet.rosinstall

Then, compare the new rosinstall file to the old version to see which packages will be updated:

$ diff -u jade-desktop-full-wet.rosinstall jade-desktop-full-wet.rosinstall.old

If you‘re satified with these changes, incorporate the new rosinstall file into the workspace and update your workspace:

$ wstool merge -t src jade-desktop-full-wet.rosinstall$ wstool update -t src

Rebuild your workspace

Now that the workspace is up to date with the latest sources, rebuild it:

$ ./src/catkin/bin/catkin_make_isolated --install

If you specified the --install-space option when your workspace initially, you should specify it again when rebuilding your workspace

Once your workspace has been rebuilt, you should source the setup files again:

$ source ~/ros_catkin_ws/install_isolated/setup.bash

原文：http://my.oschina.net/u/2306127/blog/480604

内容总结

以上是互联网集市为您收集整理的ROS-Jade版在UbuntuKylin15.04上的源码安装全部内容，希望文章能够帮你解决ROS-Jade版在UbuntuKylin15.04上的源码安装所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

扫描二维码推送至手机访问。

本文链接：https://qyyshop.com/info/1243705.html

来源：【匿名】