TensorFlow入门使用tf.train.Saver()保存模型
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了TensorFlow入门使用tf.train.Saver()保存模型,小编现在分享给大家,供广大互联网技能从业者学习和参考。文章包含4044字,纯文字阅读大概需要6分钟。
内容图文
这篇文章主要介绍了TensorFlow入门使用 tf.train.Saver()保存模型,现在分享给大家,也给大家做个参考。一起过来看看吧关于模型保存的一点心得
saver = tf.train.Saver(max_to_keep=3)
在定义 saver 的时候一般会定义最多保存模型的数量,一般来说,如果模型本身很大,我们需要考虑到硬盘大小。如果你需要在当前训练好的模型的基础上进行 fine-tune,那么尽可能多的保存模型,后继 fine-tune 不一定从最好的 ckpt 进行,因为有可能一下子就过拟合了。但是如果保存太多,硬盘也有压力呀。如果只想保留最好的模型,方法就是每次迭代到一定步数就在验证集上计算一次 accuracy 或者 f1 值,如果本次结果比上次好才保存新的模型,否则没必要保存。
如果你想用不同 epoch 保存下来的模型进行融合的话,3到5 个模型已经足够了,假设这各融合的模型成为 M,而最好的一个单模型称为 m_best, 这样融合的话对于M 确实可以比 m_best 更好。但是如果拿这个模型和其他结构的模型再做融合的话,M 的效果并没有 m_best 好,因为M 相当于做了平均操作,减少了该模型的“特性”。
但是又有一种新的融合方式,就是利用调整学习率来获取多个局部最优点,就是当 loss 降不下了,保存一个 ckpt, 然后开大学习率继续寻找下一个局部最优点,然后用这些 ckpt 来做融合,还没试过,单模型肯定是有提高的,就是不知道还会不会出现上面再与其他模型融合就没提高的情况。
如何使用 tf.train.Saver() 来保存模型
之前一直出错,主要是因为坑爹的编码问题。所以要注意文件的路径绝对不不要出现什么中文呀。
import tensorflow as tf config = tf.ConfigProto() config.gpu_options.allow_growth = True sess = tf.Session(config=config) # Create some variables. v1 = tf.Variable([1.0, 2.3], name="v1") v2 = tf.Variable(55.5, name="v2") # Add an op to initialize the variables. init_op = tf.global_variables_initializer() # Add ops to save and restore all the variables. saver = tf.train.Saver() ckpt_path = './ckpt/test-model.ckpt' # Later, launch the model, initialize the variables, do some work, save the # variables to disk. sess.run(init_op) save_path = saver.save(sess, ckpt_path, global_step=1) print("Model saved in file: %s" % save_path)
Model saved in file: ./ckpt/test-model.ckpt-1
注意,在上面保存完了模型之后。应该把 kernel restart 之后才能使用下面的模型导入。否则会因为两次命名 “v1” 而导致名字错误。
import tensorflow as tf config = tf.ConfigProto() config.gpu_options.allow_growth = True sess = tf.Session(config=config) # Create some variables. v1 = tf.Variable([11.0, 16.3], name="v1") v2 = tf.Variable(33.5, name="v2") # Add ops to save and restore all the variables. saver = tf.train.Saver() # Later, launch the model, use the saver to restore variables from disk, and # do some work with the model. # Restore variables from disk. ckpt_path = './ckpt/test-model.ckpt' saver.restore(sess, ckpt_path + '-'+ str(1)) print("Model restored.") print sess.run(v1) print sess.run(v2)
INFO:tensorflow:Restoring parameters from ./ckpt/test-model.ckpt-1
Model restored.
[ 1. 2.29999995]
55.5
导入模型之前,必须重新再定义一遍变量。
但是并不需要全部变量都重新进行定义,只定义我们需要的变量就行了。
也就是说,你所定义的变量一定要在 checkpoint 中存在;但不是所有在checkpoint中的变量,你都要重新定义。
import tensorflow as tf config = tf.ConfigProto() config.gpu_options.allow_growth = True sess = tf.Session(config=config) # Create some variables. v1 = tf.Variable([11.0, 16.3], name="v1") # Add ops to save and restore all the variables. saver = tf.train.Saver() # Later, launch the model, use the saver to restore variables from disk, and # do some work with the model. # Restore variables from disk. ckpt_path = './ckpt/test-model.ckpt' saver.restore(sess, ckpt_path + '-'+ str(1)) print("Model restored.") print sess.run(v1)
INFO:tensorflow:Restoring parameters from ./ckpt/test-model.ckpt-1
Model restored.
[ 1. 2.29999995]
tf.Saver([tensors_to_be_saved]) 中可以传入一个 list,把要保存的 tensors 传入,如果没有给定这个list的话,他会默认保存当前所有的 tensors。一般来说,tf.Saver 可以和 tf.variable_scope() 巧妙搭配,可以参考: 【迁移学习】往一个已经保存好的模型添加新的变量并进行微调
相关推荐:
关于Tensorflow中的tf.train.batch函数
以上就是TensorFlow入门使用 tf.train.Saver()保存模型的详细内容,更多请关注Gxl网其它相关文章!
内容总结
以上是互联网集市为您收集整理的TensorFlow入门使用tf.train.Saver()保存模型全部内容,希望文章能够帮你解决TensorFlow入门使用tf.train.Saver()保存模型所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错,欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 gblab@vip.qq.com 举报,一经查实,本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。