首页 / 更多教程 / xbcloud直接备份DB到s3，没有中间本地文件中转

xbcloud直接备份DB到s3，没有中间本地文件中转

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了xbcloud直接备份DB到s3，没有中间本地文件中转，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含10755字，纯文字阅读大概需要16分钟。

内容图文

[root@spray1:/usr/local/src/percona-xtradb-cluster-operator/deploy]# kubectl logs -f cluster1-xb-cron-cluster1-20200422025603-s923k-ppwlt -n pxc

GARBD_OPTS=
SOCAT_OPTS=TCP-LISTEN:4444,reuseaddr,retry=30
check_ssl
CA=/var/run/secrets/kubernetes.io/serviceaccount/ca.crt
‘[‘ -f /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt ‘]‘
SSL_DIR=/etc/mysql/ssl
‘[‘ -f /etc/mysql/ssl/ca.crt ‘]‘
CA=/etc/mysql/ssl/ca.crt
SSL_INTERNAL_DIR=/etc/mysql/ssl-internal
‘[‘ -f /etc/mysql/ssl-internal/ca.crt ‘]‘
CA=/etc/mysql/ssl-internal/ca.crt
KEY=/etc/mysql/ssl/tls.key
CERT=/etc/mysql/ssl/tls.crt
‘[‘ -f /etc/mysql/ssl-internal/tls.key -a -f /etc/mysql/ssl-internal/tls.crt ‘]‘
KEY=/etc/mysql/ssl-internal/tls.key
CERT=/etc/mysql/ssl-internal/tls.crt
‘[‘ -f /etc/mysql/ssl-internal/ca.crt -a -f /etc/mysql/ssl-internal/tls.key -a -f /etc/mysql/ssl-internal/tls.crt ‘]‘
GARBD_OPTS=‘socket.ssl_ca=/etc/mysql/ssl-internal/ca.crt;socket.ssl_cert=/etc/mysql/ssl-internal/tls.crt;socket.ssl_key=/etc/mysql/ssl-internal/tls.key;socket.ssl_cipher=;‘
SOCAT_OPTS=openssl-listen:4444,reuseaddr,cert=/etc/mysql/ssl-internal/tls.crt,key=/etc/mysql/ssl-internal/tls.key,cafile=/etc/mysql/ssl-internal/ca.crt,verify=1,retry=30
‘[‘ -n andy-bakckup-s3 ‘]‘
backup_s3
S3_BUCKET_PATH=cluster1-2020-22-04-02:56:04-full
echo ‘Backup to s3://andy-bakckup-s3/cluster1-2020-22-04-02:56:04-full started‘
mc -C /tmp/mc config host add dest https://s3.amazonaws.com AKIAI3K33V5Q123HQR6A K8+JgeX0+DQCRvbFmbTNTwjtT123XnAtoP35ZBQx
Backup to s3://andy-bakckup-s3/cluster1-2020-22-04-02:56:04-full started
Added dest successfully.
+ xbcloud delete --storage=s3 --s3-bucket=andy-bakckup-s3 cluster1-2020-22-04-02:56:04-full

200422 02:56:09 xbcloud: Probe failed. Please check your credentials and endpoint settings.
:
request_streaming
++ hostname -i
local LOCAL_IP=172.19.4.236
++ get_backup_source
++ peer-list -on-start=/usr/bin/get-pxc-state -service=cluster1-pxc
++ grep wsrep_ready:ON:wsrep_connected:ON:wsrep_local_state_comment:Synced:wsrep_cluster_status:Primary
++ sort
++ tail -1
++ cut -d . -f 1
++ cut -d : -f 2
local NODE_NAME=cluster1-pxc-2
‘[‘ -z cluster1-pxc-2 ‘]‘
timeout -k 25 20 garbd --address ‘gcomm://cluster1-pxc-2.cluster1-pxc?gmcast.listen_addr=tcp://0.0.0.0:4444‘ --donor cluster1-pxc-2 --group cluster1-pxc --options ‘socket.ssl_ca=/etc/mysql/ssl-internal/ca.crt;socket.ssl_cert=/etc/mysql/ssl-internal/tls.crt;socket.ssl_key=/etc/mysql/ssl-internal/tls.key;socket.ssl_cipher=;‘ --sst xtrabackup-v2:172.19.4.236:4444/xtrabackup_sst//1
tee /tmp/garbd.log
2020-04-22 02:56:12.786 INFO: CRC-32C: using hardware acceleration.
2020-04-22 02:56:12.786 INFO: Read config:
daemon: 0
name: garb
address: gcomm://cluster1-pxc-2.cluster1-pxc?gmcast.listen_addr=tcp://0.0.0.0:4444
group: cluster1-pxc
sst: xtrabackup-v2:172.19.4.236:4444/xtrabackup_sst//1
donor: cluster1-pxc-2
options: socket.ssl_ca=/etc/mysql/ssl-internal/ca.crt;socket.ssl_cert=/etc/mysql/ssl-internal/tls.crt;socket.ssl_key=/etc/mysql/ssl-internal/tls.key;socket.ssl_cipher=;; gcs.fc_limit=9999999; gcs.fc_factor=1.0; gcs.fc_master_slave=yes
cfg:
log:

2020-04-22 02:56:12.787 INFO: Using CRC-32C for message checksums.
2020-04-22 02:56:12.787 INFO: initializing ssl context
2020-04-22 02:56:12.787 INFO: gcomm thread scheduling priority set to other:0
2020-04-22 02:56:12.787 WARN: Fail to access the file (./gvwstate.dat) error (No such file or directory). It is possible if node is booting for first time or re-booting after a graceful shutdown
2020-04-22 02:56:12.787 INFO: Restoring primary-component from disk failed. Either node is booting for first time or re-booting after a graceful shutdown
2020-04-22 02:56:12.788 INFO: GMCast version 0
2020-04-22 02:56:12.789 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) listening at ssl://0.0.0.0:4444
2020-04-22 02:56:12.789 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) multicast: , ttl: 1
2020-04-22 02:56:12.789 INFO: EVS version 0
2020-04-22 02:56:12.789 INFO: gcomm: connecting to group ‘cluster1-pxc‘, peer ‘cluster1-pxc-2.cluster1-pxc:‘
2020-04-22 02:56:12.797 INFO: SSL handshake successful, remote endpoint ssl://172.19.0.185:4567 local endpoint ssl://172.19.4.236:60754 cipher: ECDHE-RSA-AES256-GCM-SHA384 compression: none
2020-04-22 02:56:12.799 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) connection established to 65d71b03 ssl://172.19.0.185:4567
2020-04-22 02:56:12.799 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) turning message relay requesting on, nonlive peers: ssl://172.19.1.170:4567 ssl://172.19.2.44:4567
2020-04-22 02:56:13.016 INFO: SSL handshake successful, remote endpoint ssl://172.19.1.170:41248 local endpoint ssl://172.19.4.236:4444 cipher: ECDHE-RSA-AES256-GCM-SHA384 compression: none
2020-04-22 02:56:13.017 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) connection established to 56803d0f ssl://172.19.1.170:4567
2020-04-22 02:56:13.023 INFO: SSL handshake successful, remote endpoint ssl://172.19.2.44:38666 local endpoint ssl://172.19.4.236:4444 cipher: ECDHE-RSA-AES256-GCM-SHA384 compression: none
2020-04-22 02:56:13.024 INFO: SSL handshake successful, remote endpoint ssl://172.19.2.44:4567 local endpoint ssl://172.19.4.236:45086 cipher: ECDHE-RSA-AES256-GCM-SHA384 compression: none
2020-04-22 02:56:13.024 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) connection established to 4a935df7 ssl://172.19.2.44:4567
2020-04-22 02:56:13.024 INFO: (d36b253e, ‘ssl://0.0.0.0:4444‘) connection established to 4a935df7 ssl://172.19.2.44:4567
2020-04-22 02:56:13.292 INFO: declaring 4a935df7 at ssl://172.19.2.44:4567 stable
2020-04-22 02:56:13.292 INFO: declaring 56803d0f at ssl://172.19.1.170:4567 stable
2020-04-22 02:56:13.292 INFO: declaring 65d71b03 at ssl://172.19.0.185:4567 stable
2020-04-22 02:56:13.293 INFO: Node 4a935df7 state primary
2020-04-22 02:56:13.294 INFO: Current view of cluster as seen by this node
view (view_id(PRIM,4a935df7,6)
memb {
4a935df7,0
56803d0f,0
65d71b03,0
d36b253e,0
}
joined {
}
left {
}
partitioned {
}
)
2020-04-22 02:56:13.294 INFO: Save the discovered primary-component to disk
2020-04-22 02:56:13.294 WARN: open file(./gvwstate.dat.tmp) failed(Permission denied)
2020-04-22 02:56:13.790 INFO: gcomm: connected
2020-04-22 02:56:13.790 INFO: Shifting CLOSED -> OPEN (TO: 0)
2020-04-22 02:56:13.790 INFO: New COMPONENT: primary = yes, bootstrap = no, my_idx = 3, memb_num = 4
2020-04-22 02:56:13.790 INFO: STATE EXCHANGE: Waiting for state UUID.
2020-04-22 02:56:13.790 INFO: STATE EXCHANGE: sent state msg: d3ba53e3-8444-11ea-a507-dfb53404e518
2020-04-22 02:56:13.790 INFO: STATE EXCHANGE: got state msg: d3ba53e3-8444-11ea-a507-dfb53404e518 from 0 (cluster1-pxc-0)
2020-04-22 02:56:13.790 INFO: STATE EXCHANGE: got state msg: d3ba53e3-8444-11ea-a507-dfb53404e518 from 1 (cluster1-pxc-1)
2020-04-22 02:56:13.790 INFO: STATE EXCHANGE: got state msg: d3ba53e3-8444-11ea-a507-dfb53404e518 from 2 (cluster1-pxc-2)
2020-04-22 02:56:13.792 INFO: STATE EXCHANGE: got state msg: d3ba53e3-8444-11ea-a507-dfb53404e518 from 3 (garb)
2020-04-22 02:56:13.792 INFO: Quorum results:
version = 4,
component = PRIMARY,
conf_id = 4,
members = 3/4 (primary/total),
act_id = 17,
last_appl. = -1,
protocols = 0/9/3 (gcs/repl/appl),
group UUID = ad79c07d-2579-11ea-b335-9347b0e3d60d
2020-04-22 02:56:13.792 INFO: Flow-control interval: [1048575, 1048575]
2020-04-22 02:56:13.792 INFO: Trying to continue unpaused monitor
2020-04-22 02:56:13.792 INFO: Shifting OPEN -> PRIMARY (TO: 17)
2020-04-22 02:56:13.792 INFO: Sending state transfer request: ‘xtrabackup-v2:172.19.4.236:4444/xtrabackup_sst//1‘, size: 49
2020-04-22 02:56:13.793 INFO: Member 3.0 (garb) requested state transfer from ‘cluster1-pxc-2‘. Selected 2.0 (cluster1-pxc-2)(SYNCED) as donor.
2020-04-22 02:56:13.793 INFO: Shifting PRIMARY -> JOINER (TO: 17)
2020-04-22 02:56:13.793 INFO: Closing send monitor...
2020-04-22 02:56:13.793 INFO: Closed send monitor.
2020-04-22 02:56:13.793 INFO: gcomm: terminating thread
2020-04-22 02:56:13.793 INFO: gcomm: joining thread
2020-04-22 02:56:13.793 INFO: gcomm: closing backend
2020-04-22 02:56:13.794 INFO: 3.0 (garb): State transfer from 2.0 (cluster1-pxc-2) complete.
2020-04-22 02:56:13.794 INFO: SST leaving flow control
2020-04-22 02:56:13.794 INFO: Shifting JOINER -> JOINED (TO: 17)
2020-04-22 02:56:13.795 INFO: Current view of cluster as seen by this node
view (view_id(NON_PRIM,4a935df7,6)
memb {
d36b253e,0
}
joined {
}
left {
}
partitioned {
4a935df7,0
56803d0f,0
65d71b03,0
}
)
2020-04-22 02:56:13.795 INFO: Current view of cluster as seen by this node
view ((empty))
2020-04-22 02:56:13.796 INFO: gcomm: closed
2020-04-22 02:56:13.796 WARN: 0x14a1678 down context(s) not set
2020-04-22 02:56:13.796 WARN: Failed to send SYNC signal: -107 (Transport endpoint is not connected)
2020-04-22 02:56:13.796 INFO: New COMPONENT: primary = no, bootstrap = no, my_idx = 0, memb_num = 1
2020-04-22 02:56:13.796 INFO: Flow-control interval: [1048575, 1048575]
2020-04-22 02:56:13.796 INFO: Trying to continue unpaused monitor
2020-04-22 02:56:13.796 INFO: Received NON-PRIMARY.
2020-04-22 02:56:13.796 INFO: Shifting JOINED -> OPEN (TO: 17)
2020-04-22 02:56:13.796 INFO: Received self-leave message.
2020-04-22 02:56:13.796 INFO: Flow-control interval: [1048575, 1048575]
2020-04-22 02:56:13.796 INFO: Trying to continue unpaused monitor
2020-04-22 02:56:13.796 INFO: Received SELF-LEAVE. Closing connection.
2020-04-22 02:56:13.796 INFO: Shifting OPEN -> CLOSED (TO: 17)
2020-04-22 02:56:13.796 INFO: RECV thread exiting 0: Success
2020-04-22 02:56:13.796 INFO: recv_thread() joined.
2020-04-22 02:56:13.796 INFO: Closing replication queue.
2020-04-22 02:56:13.796 INFO: Closing slave action queue.
2020-04-22 02:56:13.796 WARN: Attempt to close a closed connection
2020-04-22 02:56:13.796 INFO: Exiting main loop
2020-04-22 02:56:13.796 INFO: Shifting CLOSED -> DESTROYED (TO: 17)

grep ‘State transfer request failed‘ /tmp/garbd.log
grep ‘WARN: Protocol violation. JOIN message sender ... (garb) is not in state transfer‘ /tmp/garbd.log
grep ‘WARN: Rejecting JOIN message from ... (garb): new State Transfer required.‘ /tmp/garbd.log
socat -u openssl-listen:4444,reuseaddr,cert=/etc/mysql/ssl-internal/tls.crt,key=/etc/mysql/ssl-internal/tls.key,cafile=/etc/mysql/ssl-internal/ca.crt,verify=1,retry=30 stdio
xbcloud put --storage=s3 --parallel=10 --md5 --s3-bucket=andy-bakckup-s3 cluster1-2020-22-04-02:56:04-full
200422 02:56:16 xbcloud: Probe failed. Please check your credentials and endpoint settings.

xbcloud直接备份DB到s3，没有中间本地文件中转

标签：usr director exit openssl ESS sed required fir har

本文系统来源：https://blog.51cto.com/docker/2489374

内容总结

以上是互联网集市为您收集整理的xbcloud直接备份DB到s3，没有中间本地文件中转全部内容，希望文章能够帮你解决xbcloud直接备份DB到s3，没有中间本地文件中转所遇到的程序开发问题。如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容，请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

扫描二维码推送至手机访问。

本文链接：https://qyyshop.com/info/522019.html

来源：【匿名】

【上一篇】How to Manage Database Timeouts and Cancellations in Go 【下一篇】关于IE的RegExp.exec的问题

更多 ►

【xbcloud直接备份DB到s3，没有中间本地文件中转】教程文章相关的互联网学习教程文章

xbcloud直接备份DB到s3，没有中间本地文件中转

[root@spray1:/usr/local/src/percona-xtradb-cluster-operator/deploy]# kubectl logs -f cluster1-xb-cron-cluster1-20200422025603-s923k-ppwlt -n pxcGARBD_OPTS= SOCAT_OPTS=TCP-LISTEN:4444,reuseaddr,retry=30 check_ssl CA=/var/run/secrets/kubernetes.io/serviceaccount/ca.crt ‘[‘ -f /var/run/secrets/kubernetes.io/serviceaccount/service-ca.crt ‘]‘ SSL_DIR=/etc/mysql/ssl ‘[‘ -f /etc/mysql/ssl/ca.crt ‘...

rman备份时记录更多的log 或者trace信息

有时候，我们备份时会hang住，或出现莫名其妙的问题有以下2种方法，可以多记录log 1: 分配通道时 RMAN> allocate channel t1 device type sbt PARMS=ENV=(NSR_SERVER=SHMT.US.ORACLE.COM, NSR_CLIENT=${THE_CLIENT}, NSR_GROUP=tape) trace=2; 2：在rman命令中指定 debug/trace %rman target / log rman.log trace rman.trc debug metalink id 412950.1

数据备份与恢复、系统备份与恢复【图】

数据备份与恢复、系统备份与恢复一、数据备份与恢复1、什么是备份备份，即另外准备一–为应付文件、数据丢失或损坏等可能出现的意外情况，将电子计算机存储设备中的数据复制到大容量存储设备中2、备份对象的类别系统备份–针对整个操作系统进行备份–当操作系统损坏或者无法启动时，能通过备份快速恢复数据备份–针对用户的数据文件、应用软件、数据库进行备份–当这些数据丢失或损坏时，也能通过备份恢复3、数据冷备份?什么是冷备...

Jenkins 定时备份插件 ThinBackup【代码】【图】

需求公司的整个测试环境正式环境打包都是用的同一个Jenkins, 该Jenkins是搭建在内部的一台机器上，之前有一台机器的硬盘出了问题，为了安全起见，我们决定备份 Jenkins 的配置和数据。操作：在一台机器上搭建 nfs, 挂载在 Jenkins 的机器上。在Jenkins 的机器上安装插件进行备份。(本文的主要内容)一、选择插件我们输入 Backup 后，会发现有两个插件BackupThinBackup我们这边选用的是 ThinBackup, 安装这个。二、使用 ThinBacku...

DNS测试备份

SDNS1.2.4.8 87ms210.2.4.8 42ms中科大的DNS202.38.64.1 29ms 202.112.20.131 65ms202.141.160.95 27ms202.141.160.99 26ms202.141.176.95 55ms202.141.176.99 ggCloudFlare DNS1.1.1.1 176ms1.0.0.1 164msFreenom World80.80.80.80 52ms80.80.81.81 61msALI DNS223.5.5.5 18ms-30ms223.6.6.6 22msbaiduDNS180.76.76.76 22ms 114DNS114.114.114.114 24ms114.114.115.115 26ms 原文：https://www.cnblogs.com/Lite/p/12313627.h...

TTS备份实验【代码】

查看系统版本支持的系统 1 SQL>select*from v$TRANSPORTABLE_PLATFORM ORDERBY PLATFORM_NAME;2 3PLATFORM_ID PLATFORM_NAME ENDIAN_FORMAT4----------- ------------------------------------ -------------- 56 AIX-Based Systems (64-bit) Big616 Apple Mac OS Big721 Apple Mac OS (x86-64) Little819 HP IA Open VMS Little9...

数据库（表）的逻辑备份与恢复

一.数据库（表）的逻辑备份与恢复1.国际备份就是用工具export将数据对象的结构和数据导出到文件的过程，逻辑恢复就是指将数据库对象被误操作而损坏后使用的工具import利用备份的文件把数据对象导入到数据库的过程，物理备份即可在数据库open的状态下进行也可以在数据库关闭后进行。但是逻辑备份和恢复只能在open的状态下进行。2.导出导出具体的分为：导出表，导出方案，导出数据库三种方式导出使用exp命令来完成的，改命令常用的选...

WHMCS如何进行数据库备份【图】

随着计算机网络的飞速发展,信息安全的重要性日趋明显,但是,作为信息安全的一个重要内容——数据库备份的重要性却往往被人们所忽视。定期备份数据库是非常重要的——毕竟硬盘损坏、******对服务器网站造成的破坏都是毁灭性的!这时,如果没有采取数据库备份的话，服务器上的数据会全部丢失，这个严重性是不言而喻的。那么WHMCS是如何进行数据库备份?下面跟随小编一起去了解下吧，希望能帮助到大家。在WHMCS上备份数据库文件非常简单，...

用计划任务和批处理程序实现数据库备份的自动异地存储【图】

1、打开SQL Server Management Studio，在对象资源管理器中依次点开local-->管理-->维护计划-->右键维护计划向导;2、维护计划向导3、选择计划属性4、作业计划5、选择维护任务6、选择需要备份的数据库选择备份目的路径7、选择报告选项8、完成第三步，在服务器上建立一个自动复制文件的BAT文件将下面的代码复制粘贴到TXT文件保存，然后将TXT文件的后缀名改为BAT 前半段的路径是数据库备份源文件夹注意最后没有\ 后半段路径是目的...

备份，恢复数据库

备份，恢复数据库标签：backup 127.0.0.1 foreach connect while 数据库连接 selected this 删除本文系统来源：http://www.cnblogs.com/taikongliu/p/6403488.html

15.数据库备份【图】

保证数据不丢失数据转移MySQL数据库备份的方式，数据库是存储在物理磁盘上，数据是在data目录直接copy物理文件在SQLyog这种可视化工具中手动导出使用命令行导出 mysqldump -h 主机 -u 用户名 -p 密码数据库名表名1 表名2 >物理磁盘位置/文件名C:\Users\zyntest>mysqldump -hlocalhost -uroot -p123456 school student >C:/a.sql导入，首先先登录mysql -uroot -p12345678source 备份文件原文：https://www.cnblogs.com/autumn...

innobackupex的备份和恢复

http://blog.itpub.net/15480802/viewspace-1173479/1 原理分3个阶段：备份backup – 预恢复prepare -- 恢复restore注：复制innodb表文件时可能包含不完整事务，需要prepare将其变为consistent 首先复制所有的Innodb数据文件，这样复制出来的文件肯定是不一致的，然后对每个文件进行崩溃恢复处理，最终达到一致.XtraBackup在启动的时候会记录一个LSN（log sequence number），然后就把所有的Innodb数据文件复制出来，这样复制出来...

RMAN备份时报“ORA-19504: failed to create file”和“ORA-27038: created file already exists”【代码】

RMAN> run { 2> allocate channel ch00 type disk; 3> backup format ‘/dbbackup/db_%T‘ database; 4> release channel ch00; 5> }报出以下错误：released channel: ch00 RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: fai...

学习织梦网站必需会的一件事：织梦网站数据备份【图】

任务：宝塔面板织梦网站备份织梦CMS程序运行环境：PHP+MySQL所以无论是备份还是还原，都涉及2个部分，一个是web文件的备份，一个是数据库的备份。做好数据备份是站长管理员和维护人员的基本操作，织梦是php语言书写的程序，但是它的数据备份比一般的程序都简单，织梦本身就集成了mysql的备份方法。下面说下织梦网站的数据备份方法。织梦网站数据库的备份进入织梦网站后台，系统-数据备份/还原-页面拉到最下方，点击-全选-提交，就开...

【DG】怎么使用Data Pump备份物理备库

先决条件：我们都知道数据泵（Data Pump）不能直接在物理备用数据库上执行，这由于执行数据泵时数据泵会创建和维护一个表，还要求数据库必须是READ WRITE模式，因此我们必须从其他数据库使用NETWORK_LINK备份物理备用数据库。NETWORK_LINK参数启动主要通过使用一个有效的数据库链接。当expdp启动连接后由source_database_link引用物理备用数据库，检索数据，并将数据写入到一个转储文件集。物理备用数据库必须是“READ ONLY”模...

首页 / 更多教程 / xbcloud直接备份DB到s3，没有中间本地文件中转

xbcloud直接备份DB到s3，没有中间本地文件中转

内容导读

内容图文

+ xbcloud delete --storage=s3 --s3-bucket=andy-bakckup-s3 cluster1-2020-22-04-02:56:04-full

200422 02:56:09 xbcloud: Probe failed. Please check your credentials and endpoint settings.

内容总结

内容备注

内容手机端

【xbcloud直接备份DB到s3，没有中间本地文件中转】教程文章相关的互联网学习教程文章

xbcloud直接备份DB到s3，没有中间本地文件中转

rman备份时记录更多的log 或者trace信息

数据备份与恢复、系统备份与恢复【图】

Jenkins 定时备份插件 ThinBackup【代码】【图】

DNS测试备份

TTS备份实验【代码】

数据库（表）的逻辑备份与恢复

WHMCS如何进行数据库备份【图】

用计划任务和批处理程序实现数据库备份的自动异地存储【图】

备份，恢复数据库

15.数据库备份【图】

innobackupex的备份和恢复

RMAN备份时报“ORA-19504: failed to create file”和“ORA-27038: created file already exists”【代码】

学习织梦网站必需会的一件事：织梦网站数据备份【图】

【DG】怎么使用Data Pump备份物理备库

更多教程 - 最新教程

更多教程 - 最热教程