读官方指南经历Mysql5.6服务安装

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了读官方指南经历Mysql5.6服务安装，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含8422字，纯文字阅读大概需要13分钟。

内容图文

上一次安装完成Mysql5.6服务，一段时间后发生异常，Mysql服务无法启动进程终止：1067；网上找了好多方法还是没能解决这个问题，今天重新安装Mysql5.6，同样出现

上一次安装完成Mysql5.6服务，一段时间后发生异常，Mysql服务无法启动进程终止： 1067；网上找了好多方法还是没能解决这个问题，今天重新安装Mysql5.6，同样出现这个问题，后来通过阅读

MySQL 5.6 Reference Manual Including MySQL Cluster NDB 7.3 Reference Guide

这个问题最终得以解决了。

下面是安装Mysql On Windows 解压安装方式。

#Path to installation directory. All paths are usually resolved relative to this. #basedir="C:/Program Files/MySQL/MySQL Server 5.0/" basedir = D:/__dev/mysql-5.6.12-win32 #Path to the database root #datadir="C:/Program Files/MySQL/MySQL Server 5.0/Data/" datadir = D:/__dev/mysql-5.6.12-win32/data

如上图配置basedir和datadir.

在开发指南上有精简配置如下图：

5. 使用管理员权限运行命令窗口，香港虚拟主机，切换工作目录为Path目录下，安装Mysql服务

mysqld -install 出现Service successfully installed. 表示安装服务成功

6. 启动mysql服务

net start mysql

7.登录到mysql，并修改root用户密码，默认为空

mysql>mysq -uroot mysql>update mysql.user set password=PASSWORD('root') where User='root'

问题解决了，mysql5.6的配置文件在安装目录下，香港服务器，名字已经变为my-default.ini.

详细配置信息如下：

[client] port=3306 [mysql] #default-character-set=latin1 default-character-set=utf8 [mysqld] # The TCP/IP Port the MySQL Server will listen on port=3306 #log-error=c:\error.log #Path to installation directory. All paths are usually resolved relative to this. #basedir="C:/Program Files/MySQL/MySQL Server 5.0/" basedir = D:/__dev/mysql-5.6.12-win32 #Path to the database root #datadir="C:/Program Files/MySQL/MySQL Server 5.0/Data/" datadir = D:/__dev/mysql-5.6.12-win32/data # The default character set that will be used when a new schema or table is # created and no character set is defined default-character-set=utf8 # The default storage engine that will be used when create new tables when default-storage-engine=INNODB # Set the SQL mode to strict sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION" # The maximum amount of concurrent sessions the MySQL server will # allow. One of these connections will be reserved for a user with # SUPER privileges to allow the administrator to login even if the # connection limit has been reached. max_connections=100 # Query cache is used to cache SELECT results and later return them # without actual executing the same query once again. Having the query # cache enabled may result in significant speed improvements, if your # have a lot of identical queries and rarely changing tables. See the # "Qcache_lowmem_prunes" status variable to check if the current value # is high enough for your load. # Note: In case your tables change very often or if your queries are # textually different every time, the query cache may result in a # slowdown instead of a performance improvement. query_cache_size=0 # The number of open tables for all threads. Increasing this value # increases the number of file descriptors that mysqld requires. # Therefore you have to make sure to set the amount of open files # allowed to at least 4096 in the variable "open-files-limit" in # section [mysqld_safe] table_cache=256 # Maximum size for internal (in-memory) temporary tables. If a table # grows larger than this value, it is automatically converted to disk # based table This limitation is for a single table. There can be many # of them. tmp_table_size=15M # How many threads we should keep in a cache for reuse. When a client # disconnects, the client's threads are put in the cache if there aren't # more than thread_cache_size threads from before. This greatly reduces # the amount of thread creations needed if you have a lot of new # connections. (Normally this doesn't give a notable performance # improvement if you have a good thread implementation.) thread_cache_size=8 #*** MyISAM Specific options # The maximum size of the temporary file MySQL is allowed to use while # recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE. # If the file-size would be bigger than this, the index will be created # through the key cache (which is slower). myisam_max_sort_file_size=100G # If the temporary file used for fast index creation would be bigger # than using the key cache by the amount specified here, then prefer the # key cache method. This is mainly used to force long character keys in # large tables to use the slower key cache method to create the index. myisam_max_extra_sort_file_size=100G # If the temporary file used for fast index creation would be bigger # than using the key cache by the amount specified here, then prefer the # key cache method. This is mainly used to force long character keys in # large tables to use the slower key cache method to create the index. myisam_sort_buffer_size=30M # Size of the Key Buffer, used to cache index blocks for MyISAM tables. # Do not set it larger than 30% of your available memory, as some memory # is also required by the OS to cache rows. Even if you're not using # MyISAM tables, you should still set it to 8-64M as it will also be # used for internal temporary disk tables. key_buffer_size=22M # Size of the buffer used for doing full table scans of MyISAM tables. # Allocated per thread, if a full scan is needed. read_buffer_size=64K read_rnd_buffer_size=256K # This buffer is allocated when MySQL needs to rebuild the index in # REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE # into an empty table. It is allocated per thread so be careful with # large settings. sort_buffer_size=256K #*** INNODB Specific options *** # Use this option if you have a MySQL server with InnoDB support enabled # but you do not plan to use it. This will save memory and disk space # and speed up some things. #skip-innodb # Additional memory pool that is used by InnoDB to store metadata # information. If InnoDB requires more memory for this purpose it will # start to allocate it from the OS. As this is fast enough on most # recent operating systems, you normally do not need to change this # value. SHOW INNODB STATUS will display the current amount used. innodb_additional_mem_pool_size=2M # If set to 1, InnoDB will flush (fsync) the transaction logs to the # disk at each commit, which offers full ACID behavior. If you are # willing to compromise this safety, and you are running small # transactions, you may set this to 0 or 2 to reduce disk I/O to the # logs. Value 0 means that the log is only written to the log file and # the log file flushed to disk approximately once per second. Value 2 # means the log is written to the log file at each commit, but the log # file is only flushed to disk approximately once per second. innodb_flush_log_at_trx_commit=1 # The size of the buffer InnoDB uses for buffering log data. As soon as # it is full, InnoDB will have to flush it to disk. As it is flushed # once per second anyway, it does not make sense to have it very large # (even with long transactions). innodb_log_buffer_size=1M # InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and # row data. The bigger you set this the less disk I/O is needed to # access data in tables. On a dedicated database server you may set this # parameter up to 80% of the machine physical memory size. Do not set it # too large, though, because competition of the physical memory may # cause paging in the operating system. Note that on 32bit systems you # might be limited to 2-3.5G of user level memory per process, so do not # set it too high. innodb_buffer_pool_size=40M # Size of each log file in a log group. You should set the combined size # of log files to about 25%-100% of your buffer pool size to avoid # unneeded buffer pool flush activity on log file overwrite. However, # note that a larger logfile size will increase the time needed for the # recovery process. innodb_log_file_size=20M # Number of threads allowed inside the InnoDB kernel. The optimal value # depends highly on the application, hardware as well as the OS # scheduler properties. A too high value may lead to thread thrashing. innodb_thread_concurrency=8 log-error=D:/__dev/mysql-5.6.12-win32/err.log log=D:/__dev/mysql-5.6.12-win32/log.log

配置文件my-default.ini见附件下载，香港服务器租用，下载之后去掉后缀名（.txt）.

本文出自 “野马红尘” 博客，谢绝转载！

内容总结

以上是互联网集市为您收集整理的读官方指南经历Mysql5.6服务安装全部内容，希望文章能够帮你解决读官方指南经历Mysql5.6服务安装所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

---