10gRAC-10.2.0.4-dbca建库时配置OEM遇到BUG-p8350262
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了10gRAC-10.2.0.4-dbca建库时配置OEM遇到BUG-p8350262，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含3762字，纯文字阅读大概需要6分钟。
内容图文
系统环境：Oracle Linux 5.5 x64位；oracle版本：安装Cluster和OracleSoft 10.2.0.1（不创建实例）,并升级Cluster和OracleSoft到
系统环境：Oracle Linux 5.5 x64位；
oracle版本：安装Cluster和OracleSoft 10.2.0.1（不创建实例）,并升级Cluster和OracleSoft到10.2.0.4；
然后使用dbca建库时，在88%的地方停顿，并报错，见下图：
查了一下资料，，这是10.2.0.4和10.2.0.5RAC配置OEM 的一个bug，需要安装补丁：p8350262
最后RAC实例配置成功；
然后修复bug，配置EM
0、下载补丁：p8350262_10204_Generic.zip
这里附上免费下载链接
（注：以下操作在oracle用户下）
1、检查opatch版本是否为10.2.0.4 ， 执行：/oracle/product/10.2.0/db_1/OPatch/opatch version
2、unzip p8350262_10204_Generic.zip 进入解压后的patch目录/oracle/product/10.2.0/db_1/OPatch/opatch apply
3、在解压后的patch目录下 ./killDBConsole
4、在第一节点执行：emctl secure dbconsole -reset
5、在第二节点执行：emctl secure dbconsole
6、第1节点和第2节点分别执行：emctl start dbconsole
最后启动正常，访问：https://ip:1158/em正常访问登陆，则bug修复成功，em配置完成；
附：PATCH解压后的README文件说明：
[oracle@dbcc1 8350262]$ cat README.txt
Bugs Fixed by this patch:
-------------------------
8350262:CREATE DBCONSOLE CERT WITH 10YEAR VALIDITY
Patch Preinstall Steps:
-----------------------
1. For non-recommended patches, you must have the exact symptoms
described in the service request (SR).
2. Verify the OUI Inventory.
OPatch needs access to a valid OUI inventory to apply patches.
Validate the OUI inventory with the following command:
% opatch lsinventory
If the command errors out, contact Oracle Support and work to validate
and verify the inventory setup before proceeding.
3. Please use the latest Version of OPatch.
Oracle recommends that all customers be on the latest version of OPatch.
Please review the following metalink note and follow the instructions
to update to the latest version if needed:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showNOT?p_id=224346.1
4. Confirm executables appear in your system PATH.
The patching process will use the unzip and the opatch executables. After
sourcing the ORACLE_HOME environment, confirm both of these exist before
continuing:
- "which opatch"
- "which unzip"
If either of these executables do not show in the PATH, correct the problem
before proceeding.
5. Create a location for storing the unzipped patch. This location
will be referred to later in the document as
6. Unzip the patch zip file into the
unzip -d
7. Shut down services running from the ORACLE_HOME.
Before applying this patch, do a clean shut down of all services
running from the ORACLE_HOME.
Patch Installation Steps:
-------------------------
1. Shutdown EM DB Console using the following command.
% $ORACLE_HOME/bin/emctl stop dbconsole
2. Set your current directory to the directory where the patch
is located:
% cd
Ensure that the directory containing the opatch script appears in
your $PATH; then enter the following command:
% opatch apply
3. Start EM DB Console using the following command.
% $ORACLE_HOME/bin/emctl start dbconsole
NOTE:
------
There may be cases when Starting dbconsole may fail post 31-Dec-2010.
In this case, Please set ORACLE_HOME to your Database Home & ORACLE_SID
and run the following from the patch folder.
% ./killDBConsole
Patch Deinstallation Instructions:
----------------------------------
1. Shutdown EM DB Console using the following command.
% $ORACLE_HOME/bin/emctl stop dbconsole
2. Set your current directory to the directory where the patch
is located:
% cd
3. Ensure that the directory containing the opatch script appears in
your $PATH; then run the following command:-
% opatch rollback -id 8350262
4. Start EM DB Console using the following command.
% $ORACLE_HOME/bin/emctl start dbconsole
内容总结
以上是互联网集市为您收集整理的10gRAC-10.2.0.4-dbca建库时配置OEM遇到BUG-p8350262全部内容，希望文章能够帮你解决10gRAC-10.2.0.4-dbca建库时配置OEM遇到BUG-p8350262所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。