HP-UX平台IoctlASYNC_CONFIGerror,errno=11报错分析

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了HP-UX平台IoctlASYNC_CONFIGerror,errno=11报错分析，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含3362字，纯文字阅读大概需要5分钟。

内容图文

最近一用户的数据库出现以下报错：Ioctl ASYNC_CONFIG error, errno = 11环境如下：HP-UX 11.31，ORACLE 10.2.0.5.7经查询metali

最近一用户的数据库出现以下报错：
Ioctl ASYNC_CONFIG error, errno = 11

环境如下：
HP-UX 11.31，Oracle 10.2.0.5.7

经查询metalink，针对这个问题的说明如下：
Applies to:
Oracle Server - Enterprise Edition - Version: 9.2.0.1 and later [Release: 9.2 and later ]
HP-UX PA-RISC (64-bit)
HP-UX PA-RISC (32-bit)
HP-UX Itanium
HP-UX Itanium (32-bit)
Symptoms
On HP Platforms with Asynchronous IO configured you are receiving the following error message:
Ioctl ASYNC_CONFIG error, errno = %s

NOTE:
%s is replaced with the actual error number

Cause
The general cause is an inapproriate configuration of system requirements, e.g. settings, resources, privileges.
Solution
The following sections refer to the actual error number in the message
Ioctl ASYNC_CONFIG error, errno = %s

errno = 1
Make sure the oracle software group owner, usually "dba", is granted MLOCK, RTSCHED and RTPRIO permissions:
(1) # /usr/sbin/setprivgrp dba MLOCK
(2) # vi /etc/privgroup
-- This should contain dba MLOCK RTSCHED RTPRIO
(3) # cat /etc/privgroup
dba MLOCK RTSCHED RTPRIO

NOTE:
On 8.1.7 and prior releases, please make sure to install patch PHKL_22126 or newer
Refer to
Note 133007.1 ALERT:HP-UX: 8.1.7 RDBMS will not start if the async disk driver is configured

errno = 7
The message may also appear in the format:
Ioctl ASYNC_ADDSEG error, errno = 7
Taking a Unix level tusc/truss/strace output shows the following:
pstat(PSTAT_PROC_VM, 0x9fffffffffff56b0, 104, 0, 129) ................................................................................. = 1
ioctl(8, ASYNC_ADDSEG, 0x9fffffffffff5690) ............................................................................................ ERR#7 E2BIG
open("/u01/app/diag/rdbms/orcl/ORCL/trace/ORCL_ora_1005.trc", O_WRONLY|O_APPEND|O_CREAT|0x800, 0664) ............ = 9
The SHMMAX kernel parameter is set too low, so the database requires a lots of shared memory segments (rather than just a few). The large number of shared memory segments exceeds an internal limit and causes the E2BIG (Unix error 7) to occur.
Solution is to increase SHMMAX kernel parameter and restart the database.
errno = 11
Error #11 (EAGAIN) can occur due to the fact that no more real memory is available for ioctl to lock. This typically occurs when there are many concurrent sessions
Solution is to increase the amount of physical memory (RAM)
NOTE:
Increasing virtual memory by using more Swap won't help

Disabling Asynchronous IO
For Oracle version 10.1 and prior, we will check if '/dev/async' is present and will try to use it for memory locking which is needed for async I/O for SGA memory pages via ioctl. Oracle makes use of '/dev/async' only if the HP async device driver is properly configured for read and write. This is irrespective of whether the DISK_ASYNCH_IO parameter is set to TRUE.
So Oracle will use async I/O regardless of the value of init.ora settings
disk_asynch_io
filesystemio_options
Prior to 10.2, to inactivate ASYNCH_IO with Oracle, the workaround is to:
chown bin:bin /dev/async
chmod 660 /dev/async
As of 10.2, asynchronous I/O can be disabled using the designated parameters
disk_asynch_io=FALSE
--AND/OR--
filesystemio_options=none

更多Oracle相关信息见Oracle 专题页面 ?tid=12

内容总结

以上是互联网集市为您收集整理的HP-UX平台IoctlASYNC_CONFIGerror,errno=11报错分析全部内容，希望文章能够帮你解决HP-UX平台IoctlASYNC_CONFIGerror,errno=11报错分析所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端