首页 / MYSQL / MySQ常量传递辨析
MySQ常量传递辨析
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了MySQ常量传递辨析,小编现在分享给大家,供广大互联网技能从业者学习和参考。文章包含4584字,纯文字阅读大概需要7分钟。
内容图文
![MySQ常量传递辨析](/upload/InfoBanner/zyjiaocheng/555/6ccccc43625942c9963238c1ebd8694e.jpg)
一 MySQL对于表达式的化简技术,支持常量传递这一技术,如下例:CREATE TABLE `t1` (`id1` int(11) NOT NULL DEFAULT
一 MySQL对于表达式的化简技术,支持常量传递这一技术,如下例:
CREATE TABLE `t1` (
`id1` int(11) NOT NULL DEFAULT '0',
`a1` int(11) DEFAULT NULL,
`b1` int(11) DEFAULT NULL,
PRIMARY KEY (`id1`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
CREATE TABLE `t5` (
`id5` int(11) DEFAULT NULL,
`a5` int(11) DEFAULT NULL,
`b5` int(11) DEFAULT NULL,
UNIQUE KEY `id5` (`id5`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
两表各插入一些数据.
对于条件”a1=a5 and a5=1”,被MySQL的优化器优化后,变为”(`xx`.`t5`.`a5` = 1) and (`xx`.`t1`.`a1` = 1)”, 这就是常量传递技术.
mysql> explain extended select * from t5, t1 where a1=a5 and a5=1;
+----+-------------+-------+------+---------------+------+---------+------+------+----------+----------------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+-------+------+---------------+------+---------+------+------+----------+----------------------------------------------------+
| 1 | SIMPLE | t5 | ALL | NULL | NULL | NULL | NULL | 10 | 100.00 | Using where |
| 1 | SIMPLE | t1 | ALL | NULL | NULL | NULL | NULL | 9999 | 100.00 | Using where; Using join buffer (Block Nested Loop) |
+----+-------------+-------+------+---------------+------+---------+------+------+----------+----------------------------------------------------+
2 rows in set, 1 warning (0.00 sec)
mysql> show warnings;
/* select#1 */ select `xx`.`t5`.`id5` AS `id5`,`xx`.`t5`.`a5` AS `a5`,
`xx`.`t5`.`b5` AS `b5`,`xx`.`t1`.`id1` AS `id1`,`xx`.`t1`.`a1`AS `a1`,`xx`.`t1`.`b1` AS `b1`
from `xx`.`t5` join `xx`.`t1`
where ((`xx`.`t5`.`a5` = 1) and (`xx`.`t1`.`a1` = 1))
二 当条件表达式中存在主键的时候,情况会有些不同,如:
mysql> explain extended select * from t5, t1 where id1=id5 and id5=1;
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------+
| 1 | SIMPLE | t5 | const | id5 | id5 | 5 | const | 1 | 100.00 | NULL |
| 1 | SIMPLE | t1 | const | PRIMARY | PRIMARY | 4 | const | 1 | 100.00 | NULL |
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------+
2 rows in set, 1 warning (0.00 sec)
mysql> show warnings;
/* select#1 */ select '1' AS `id5`,'1' AS `a5`,NULL AS `b5`,
'1' AS `id1`,'1' AS `a1`,NULL AS `b1`
from `xx`.`t5` join `xx`.`t1`
where 1
为什么会这样?
这是因为:
1 常量传递技术,使得MySQL的优化器认为”id1=id5 =1”
2 而id1和id5分别都是主键,所以t1和t5表,都被认为是”常量表”,所以执行计划中type的值是const. 也就是说,t1和t5表元组完全能够确定(即能够在优化阶段被直接读出而不用在执行阶段定位查找元组). 所以t1和t5表的连接操作就很简单了.
3 到了显示执行计划的阶段,这时就不难理解为什么成为了”where 1”. 因为元组已经找到,此时条件已经不在起作用. 结果为真的条件正好满足常量表的元组输出.
所以,如下的一个主键和一个非主键间发生常量传递的情况也就容易理解了.
mysql> explain extended select * from t5, t1 where id1=a5 and a5=1;
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------------+
| 1 | SIMPLE | t1 | const | PRIMARY | PRIMARY | 4 | const | 1 | 100.00 | NULL |
| 1 | SIMPLE | t5 | ALL | NULL | NULL | NULL | NULL | 10 | 100.00 | Using where |
+----+-------------+-------+-------+---------------+---------+---------+-------+------+----------+-------------+
2 rows in set, 1 warning (0.00 sec)
mysql> show warnings;
/* select#1 */ select `xx`.`t5`.`id5` AS `id5`,`xx`.`t5`.`a5` AS `a5`,
`xx`.`t5`.`b5` AS `b5`,'1' AS `id1`,'1' AS `a1`,NULL AS `b1`
from `xx`.`t5` join `xx`.`t1`
where (`xx`.`t5`.`a5` = 1)
--------------------------------------分割线 --------------------------------------
Ubuntu 14.04下安装MySQL
《MySQL权威指南(原书第2版)》清晰中文扫描版 PDF
Ubuntu 14.04 LTS 安装 LNMP Nginx\PHP5 (PHP-FPM)\MySQL
Ubuntu 14.04下搭建MySQL主从服务器
Ubuntu 12.04 LTS 构建高可用分布式 MySQL 集群
Ubuntu 12.04下源代码安装MySQL5.6以及Python-MySQLdb
MySQL-5.5.38通用二进制安装
--------------------------------------分割线 --------------------------------------
本文永久更新链接地址:
内容总结
以上是互联网集市为您收集整理的MySQ常量传递辨析全部内容,希望文章能够帮你解决MySQ常量传递辨析所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错,欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 gblab@vip.qq.com 举报,一经查实,本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。