Postgres与OS内核相关的几个参数设置

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了Postgres与OS内核相关的几个参数设置，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含5467字，纯文字阅读大概需要8分钟。

内容图文

Postgres与OS内核相关的几个参数设置 Postgres在postgresql.conf里面的配置参数有几个是和OS的内核参数紧密相关的，通常默认值是偏小的，但设置过大也会造成Postgres的启动失败，官方文档(Part 17.3)有较详细的说明，但没有例子，这里给出实际示例。 测试环

Postgres与OS内核相关的几个参数设置

Postgres在postgresql.conf里面的配置参数有几个是和OS的内核参数紧密相关的，通常默认值是偏小的，但设置过大也会造成Postgres的启动失败，官方文档(Part 17.3)有较详细的说明，但没有例子，这里给出实际示例。

测试环境:

DB: postgres 9.1.3

OS: CentOS 6.2 / Redhat

--内核参数文件位置:

/proc/sys/kernel

/etc/sysctl.conf

[root@localhost ~]# sysctl -a|more

kernel.shmmax = 68719476736

kernel.shmall = 4294967296

kernel.shmmni = 4096

kernel.msgmax = 65536

kernel.msgmni = 2005

kernel.msgmnb = 65536

[postgres@localhost ~]$ cat /proc/sys/kernel/sem

250 32000 32 128

(semmsl semmns semopm semmni)

1.shared_buffers VS shmget

shared_buffers是共享内存的意思，如果该值超过系统的内存值(包括swap)，会造成启动失败

shmget是get share memory,它是创建一个共享内存的函数

[root@localhost ~]# free -m

total used free shared buffers cached

Mem: 1006 872 134 0 100 629

-/+ buffers/cache: 142 863

Swap: 2015 13 2002

[root@localhost ~]# su - postgres

[postgres@localhost ~]$ vi /database/pgdata/postgresql.conf

shared_buffers = 5GB

[postgres@localhost ~]$ pg_start

server starting

[postgres@localhost ~]$ FATAL: could not create shared memory segment: Cannot allocate memory

DETAIL: Failed system call was shmget(key=1949001, size=5609447424, 03600).

HINT: This error usually means that PostgreSQL's request for a shared memory segment exceeded available memory or swap space, or exceeded your kernel's SHMALL parameter. You can either reduce the request size or reconfigure the kernel with larger SHMALL. To reduce the request size (currently 5609447424 bytes), reduce PostgreSQL's shared memory usage, perhaps by reducing shared_buffers or max_connections.

The PostgreSQL documentation contains more information about shared memory configuration.

解决办法是减小shared_buffers、max_connections值，也或者加大shmall值、加大内存和swap，如果设置超大，大过内核值，则直接报错Invalid argument，如

[postgres@localhost ~]$ vi /database/pgdata/postgresql.conf

shared_buffers = 222222GB

max_connections = 100

[postgres@localhost ~]$ pg_start

server starting

[postgres@localhost ~]$ FATAL: invalid value for parameter "shared_buffers": "222222GB"

HINT: Value exceeds integer range.

2.max_connections VS semget

max_connections是最大连接数，即允许客户端连接的最大连接数，增大连接可以允许接入更多的客户端，但设置过大同样会造成DB启动失败

semget是获取信号的一个函数，即get semaphore

[postgres@localhost ~]$ vi /database/pgdata/postgresql.conf

max_connections = 5000

[postgres@localhost ~]$ pg_start

server starting

[postgres@localhost ~]$ FATAL: could not create semaphores: No space left on device

DETAIL: Failed system call was semget(1949125, 17, 03600).

HINT: This error does *not* mean that you have run out of disk space. It occurs when either the system limit for the maximum number of semaphore sets (SEMMNI), or the system wide maximum number of semaphores (SEMMNS), would be exceeded. You need to raise the respective kernel parameter. Alternatively, reduce PostgreSQL's consumption of semaphores by reducing its max_connections parameter.

The PostgreSQL documentation contains more information about configuring your system for PostgreSQL.

上述的空间不够不是指的是磁盘空间不够，而是创建semaphores时空间参数不够，系统调用参数semget报错，但是错误信息感觉有些迷惑......解决办法通常是减小max_connections，或者增大内核参数，如semmni,semmns等,在/proc/sys/kernel/sem里面调整,如

[root@localhost ~]# sysctl -w kernel.sem="500 64000 50 150"

kernel.sem = 500 64000 50 150

[root@localhost ~]# cat /proc/sys/kernel/sem

500 64000 50 150

附参数说明

Name Desc Reasonable Value

shmmax Maximum size of shared memory segment (bytes) at least several megabytes (see text)

shmmin Minimum size of shared memory segment (bytes) 1

shmall Total amount of shared memory available (bytes or pages) if bytes, same as SHMMAX; if pages, ceil(SHMMAX/PAGE_SIZE)

shmseg Maximum number of shared memory segments per process only 1 segment is needed, but the default is much higher

shmmni Maximum number of shared memory segments system-wide like SHMSEG plus room for other applications

semmni Maximum number of semaphore identifiers (i.e., sets) at least ceil((max_connections + autovacuum_max_workers + 4) / 16)

semmns Maximum number of semaphores system-wide ceil((max_connections + autovacuum_max_workers

+ 4) / 16) * 17 plus room for other applications

semmsl Maximum number of semaphores per set at least 17

semmap Number of entries in semaphore map see text

semvmx Maximum value of semaphore at least 1000 (The default is often 32767; do not change unless necessary)

共享内存的使用：

usage Approximate shared memory bytes

Connections (1800 + 270 * max_locks_per_transaction) * max_connections

Autovacuum workers (1800 + 270 * max_locks_per_transaction) * autovacuum_max_workers

Prepared transactions (770 + 270 * max_locks_per_transaction) * max_prepared_transactions

Shared disk buffers (block_size + 208) * shared_buffers

Wal buffers (wal_block_size + 8) * wal_buffers

Fixed space requirements 770KB

内容总结

以上是互联网集市为您收集整理的Postgres与OS内核相关的几个参数设置全部内容，希望文章能够帮你解决Postgres与OS内核相关的几个参数设置所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端