InstallingLighttpdWithPHP5(PHP-FPM)AndMySQLSupportOn_MySQL

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了InstallingLighttpdWithPHP5(PHP-FPM)AndMySQLSupportOn_MySQL，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含8179字，纯文字阅读大概需要12分钟。

内容图文

Version 1.0
Author: Falko Timme, updated by Srijan Kishore
Last edited 07/May/2014

Lighttpd is a secure, fast, standards-compliant web server designed for speed-critical environments. This tutorial shows how you can install Lighttpd on an Ubuntu 14.04 server with PHP5 support (through PHP-FPM) and MySQL support. PHP-FPM (FastCGI Process Manager) is an alternative PHP FastCGI implementation with some additional features useful for sites of any size, especially busier sites. I use PHP-FPM in this tutorial instead of Lighttpd's spawn-fcgi.

I do not issue any guarantee that this will work for you!

1 Preliminary Note

In this tutorial I use the hostnameserver1.example.comwith the IP address192.168.0.100. These settings might differ for you, so you have to replace them where appropriate.

I'm running all the steps in this tutorial with root privileges, so make sure you're logged in as root:

sudo su

2 Installing MySQL 5

First we install MySQL 5 like this:

apt-get install mysql-server mysql-client

You will be asked to provide a password for the MySQL root user - this password is valid for the userroot@localhostas well asroot@server1.example.com, so we don't have to specify a MySQL root password manually later on:

New password for the MySQL "root" user:<-- yourrootsqlpassword
Repeat password for the MySQL "root" user:<-- yourrootsqlpassword

3 Installing Lighttpd

Lighttpd is available as an Ubuntu package, therefore we can install it like this, as apache2 is installed by default in ubuntu14.04 so first we will uninstall apache2 & then further install lighttpd.

service apache2 stop
update-rc.d -f apache2 remove
apt-get remove apache2

apt-get install lighttpd

Now direct your browser tohttp://192.168.0.100/index.lighttpd.html, and you should see the Lighttpd placeholder page:

Lighttpd's default document root is/var/wwwon Ubuntu, and the configuration file is/etc/lighttpd/lighttpd.conf. Additional configurations are stored in files in the/etc/lighttpd/conf-availabledirectory - these configurations can be enabled with thelighttpd-enable-modcommand which creates a symlink from the/etc/lighttpd/conf-enableddirectory to the appropriate configuration file in/etc/lighttpd/conf-available. You can disable configurations with thelighttpd-disable-modcommand.

4 Installing PHP5

We can make PHP5 work in Lighttpd through PHP-FPM which we install like this:

apt-get install php5-fpm php5

PHP-FPM is a daemon process (with the init scriptphp5-fpm) that runs a FastCGI server on the socket/var/run/php5-fpm.sock.

5 Configuring Lighttpd And PHP5

To enable PHP5 in Lighttpd, we must modify/etc/php5/fpm/php.iniand uncomment the linecgi.fix_pathinfo=1:

vi /etc/php5/fpm/php.ini

[...]; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.PHP's; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok; what PATH_INFO is.For more information on PATH_INFO, see the cgi specs.Setting; this to 1 will cause PHP CGI to fix its paths to conform to the spec.A setting; of zero causes PHP to behave as before.Default is 1.You should fix your scripts; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.; http://php.com/cgi.fix-pathinfocgi.fix_pathinfo=1[...]

The Lighttpd configuration file for PHP/etc/lighttpd/conf-available/15-fastcgi-php.confis suitable for use with spawn-fcgi, however, we want to use PHP-FPM, therefore we create a backup of the file (named15-fastcgi-php.conf.bak) and modify15-fastcgi-php.confas follows:

cd /etc/lighttpd/conf-available/
cp 15-fastcgi-php.conf 15-fastcgi-php.conf.bak
vi 15-fastcgi-php.conf

# /usr/share/doc/lighttpd-doc/fastcgi.txt.gz# http://redmine.lighttpd.net/projects/lighttpd/wiki/Docs:ConfigurationOptions#mod_fastcgi-fastcgi## Start an FastCGI server for php (needs the php5-cgi package)fastcgi.server += ( ".php" =>(("socket" => "/var/run/php5-fpm.sock","broken-scriptfilename" => "enable")))

To enable the fastcgi configuration, run the following commands:

lighttpd-enable-mod fastcgi
lighttpd-enable-mod fastcgi-php

This creates the symlinks/etc/lighttpd/conf-enabled/10-fastcgi.confwhich points to/etc/lighttpd/conf-available/10-fastcgi.confand/etc/lighttpd/conf-enabled/15-fastcgi-php.confwhich points to/etc/lighttpd/conf-available/15-fastcgi-php.conf:

ls -l /etc/lighttpd/conf-enabled

root@server1:/etc/lighttpd/conf-available# ls -l /etc/lighttpd/conf-enabled
total 0
lrwxrwxrwx 1 root root 33 May 7 05:33 10-fastcgi.conf -> ../conf-available/10-fastcgi.conf
lrwxrwxrwx 1 root root 37 May 7 05:33 15-fastcgi-php.conf -> ../conf-available/15-fastcgi-php.conf
root@server1:/etc/lighttpd/conf-available#

Then we reload Lighttpd:

service lighttpd force-reload

Note: If you get locale errors then you can remove the error by using

apt-get install language-pack-en-base
dpkg-reconfigure locales

6 Testing PHP5 / Getting Details About Your PHP5 Installation

The document root of the default web site is/var/www. We will now create a small PHP file (info.php) in that directory and call it in a browser. The file will display lots of useful details about our PHP installation, such as the installed PHP version.

vi /var/www/info.php

Now we call that file in a browser (e.g.http://192.168.0.100/info.php):

As you see, PHP5 is working, and it's working through FPM/FastCGI, as shown in theServer APIline. If you scroll further down, you will see all modules that are already enabled in PHP5. MySQL is not listed there which means we don't have MySQL support in PHP5 yet.

7 Getting MySQL Support In PHP5

To get MySQL support in PHP, we can install thephp5-mysqlpackage. It's a good idea to install some other PHP5 modules as well as you might need them for your applications. You can search for available PHP5 modules like this:

apt-cache search php5

Pick the ones you need and install them like this:

apt-get install php5-mysql php5-curl php5-gd php5-intl php-pear php5-imagick php5-imap php5-mcrypt php5-memcache php5-ming php5-ps php5-pspell php5-recode php5-snmp php5-sqlite php5-tidy php5-xmlrpc php5-xsl

Xcache is a free and open PHP opcode cacher for caching and optimizing PHP intermediate code. It's similar to other PHP opcode cachers, such as eAccelerator and APC. It is strongly recommended to have one of these installed to speed up your PHP page.

Xcache can be installed as follows:

apt-get install php5-xcache

Now reload PHP-FPM:

service php5-fpm reload

Now reloadhttp://192.168.0.100/info.phpin your browser and scroll down to the modules section again. You should now find lots of new modules there, including the MySQL module:

8 phpMyAdmin

phpMyAdminis a web interface through which you can manage your MySQL databases. It's a good idea to install it:

apt-get install phpmyadmin

You will see the following questions:

Web server to reconfigure automatically:<-- lighttpd
Configure database for phpmyadmin with dbconfig-common?<-- No

Afterwards, you can access phpMyAdmin underhttp://192.168.0.100/phpmyadmin/:

9 Making PHP-FPM Use A TCP Connection

By default PHP-FPM is listening on the socket/var/run/php5-fpm.sock. It is also possible to make PHP-FPM use a TCP connection. To do this, open/etc/php5/fpm/pool.d/www.conf...

vi /etc/php5/fpm/pool.d/www.conf

... and make thelistenline look as follows:

[...];listen = /var/run/php5-fpm.socklisten = 127.0.0.1:9000[...]

This will make PHP-FPM listen on port9000on the IP127.0.0.1(localhost). Make sure you use a port that is not in use on your system.

Then reload PHP-FPM:

service php5-fpm reload

Next open Lighttpd's PHP configuration file/etc/lighttpd/conf-available/15-fastcgi-php.confand replace thesocketline withhostandportlines:

vi /etc/lighttpd/conf-available/15-fastcgi-php.conf

# /usr/share/doc/lighttpd-doc/fastcgi.txt.gz# http://redmine.lighttpd.net/projects/lighttpd/wiki/Docs:ConfigurationOptions#mod_fastcgi-fastcgi## Start an FastCGI server for php (needs the php5-cgi package)fastcgi.server += ( ".php" =>(("host" => "127.0.0.1","port" => "9000","broken-scriptfilename" => "enable")))

Finally reload Lighttpd:

service lighttpd force-reload

10 Links

• Lighttpd:http://www.lighttpd.net/
• PHP:http://www.php.com/
• PHP-FPM:http://php-fpm.org/
• MySQL:http://www.mysql.com/
• Ubuntu:http://www.ubuntu.com/
• phpMyAdmin:http://www.phpmyadmin.net/

内容总结

以上是互联网集市为您收集整理的InstallingLighttpdWithPHP5(PHP-FPM)AndMySQLSupportOn_MySQL全部内容，希望文章能够帮你解决InstallingLighttpdWithPHP5(PHP-FPM)AndMySQLSupportOn_MySQL所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端