首页 / ECLIPSE / Compiling&DebuggingMariaDB(andMySQL)inEclipse_MySQL

Compiling&DebuggingMariaDB(andMySQL)inEclipse_MySQL

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了Compiling&DebuggingMariaDB(andMySQL)inEclipse_MySQL，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含3897字，纯文字阅读大概需要6分钟。

内容图文

MariaDB

Introduction:

To run MariaDB from Eclipse we will actually create and install the tar.gz package resulting from compilation(SeePart 2) in a separate directory, this will allow us to have MariaDB cleanly installed on a separate location and so it will be also easily possible to run it independently from Eclipse.

In these Blog posts series we assume:

yoda							as developer user/home/yoda (or ~)	 				as home directory of developer(yoda) usermariadb-10.0.11 					as sources version (and general prefix)MariaDB10-test1 					as Eclipse project name/home/yoda/playground 					as root working directory for sources, project, and installation/home/yoda/playground/mariadb-10.0.11			as sources directory/home/yoda/playground/mariadb-10.0.11-eclipse		as project/working directory/home/yoda/playground/mariadb-10.0.11-linux-x86_64	as binary deployement directory

Replace accordingly the strings from this example to reflect your choices.

Section 3: "Install MariaDB in Eclipse"

3.1 CREATING THE PACKAGE

We have to ways to create the .tar.gz package

* In command line
* In Eclipse

Command line:

$ cd ~/playground/mariadb-10.0.11-eclipse
$ make package

At the end of the execution the package will be created and it should be namedmariadb-10.0.11-linux-x86_64.tar.gz(i686 instead of x86_64 on 32 bit Linux)

Eclipse:

Right Click on the project name(MariaDB10-test1) and choose:Make Target-->Create,
in the popup windowAdda new target just inserting the name in the first field:package, click onOk.
Now Right Click again on the project name and choose:Make Target-->Build, choosepackagefrom the list and clickBuild.

Check on Eclipse Log Console that the package is being created.

At this point, either method chosen, you should have the packagemariadb-10.0.11-linux-x86_64.tar.gzin the project directory (mariadb-10.0.11-eclipse).

3.2 INSTALL THE PACKAGE

We need at this point to run some commands from the shell:


$ cd ~/playground/
$ mv mariadb-10.0.11-eclipse/mariadb-10.0.11-linux-x86_64.tar.gz .
$ tar -zxvf mariadb-10.0.11-linux-x86_64.tar.gz
$ cd mariadb-10.0.11-linux-x86_64
$ scripts/mysql_install_db --basedir=`pwd` --datadir=`pwd`/data --user=yoda

If all is good now you have a working MariaDB installation in~/playground/mariadb-10.0.11-linux-x86_64

Section 4: "Running MariaDB in Eclipse"

4.1 Create a 'Run configuration' and Run

Assuming the full path to binaries is:/home/yoda/playground/mariadb-10.0.11-linux-x86_64.

Right Click on the project (or open theRunmenu) and click onRun As-->Run configurations...,
SelectC/C++ Application, right click and chooseNew.

Compile only two parameters in the respective tabs,MainandArguments

Main(tab):
ClickBrowseand select/home/yoda/playground/mariadb-10.0.11-linux-x86_64/bin/mysqld

Arguments(tab):
--basedir=/home/yoda/playground/mariadb-10.0.11-linux-x86_64 --datadir=/home/yoda/playground/mariadb-10.0.11-linux-x86_64/data --plugin-dir=/home/eclipse/10011/lib/plugin --user=yoda --log-error=error.log --pid-file=mysql.pid --socket=10011.sock --port=10011

Click onApplyand then you can click onRun, as usual check the progress in the Eclipse log Console,

A[Warning]about the user switch is totally fine, if you got only one warning about the user it means you probably managed to run succesfully MariaDB from Eclipse.

4.2 Checking if MariaDB is running

At this point we want to check if MariaDB is actually running:

$ cd ~/playground
$ cd mariadb-10.0.11-linux-x86_64
$ bin/mysql -uroot -h127.0.0.1 -P10011 -e"SHOW GLOBAL VARIABLES LIKE 'version'"

If you see the output:

+---------------+-----------------------+
| Variable_name | Value |
+---------------+-----------------------+
| version | 10.0.11-MariaDB-debug |
+---------------+-----------------------+
1 row in set (0.01 sec)

Your MariaDB is happily running, Congratulations!

In the next Part 4(available soon) you will learn how to debug MariaDB under Eclipse.
You may also want to reviewPart 1andPart 2.

This is the end of Part 3.

内容总结

以上是互联网集市为您收集整理的Compiling&DebuggingMariaDB(andMySQL)inEclipse_MySQL全部内容，希望文章能够帮你解决Compiling&DebuggingMariaDB(andMySQL)inEclipse_MySQL所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

扫描二维码推送至手机访问。

本文链接：https://qyyshop.com/info/577777.html

来源：【匿名】