C3P0连接池配置解决MySQL连接的空闲时间超过8小时后自动断开连接_MySQL
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了C3P0连接池配置解决MySQL连接的空闲时间超过8小时后自动断开连接_MySQL,小编现在分享给大家,供广大互联网技能从业者学习和参考。文章包含3256字,纯文字阅读大概需要5分钟。
内容图文
![C3P0连接池配置解决MySQL连接的空闲时间超过8小时后自动断开连接_MySQL](/upload/InfoBanner/zyjiaocheng/579/3c00676277014dfa94e968c3f32b818a.jpg)
通过自己亲自对各种方案进行测试,目前我认为能解决这个问题的最优办法是(直接贴代码):
以上代码只是C3P0配置的一部分,其他配置连接、驱动等就不贴出来了,你们懂的
那么如何测试这个方案是否解决了问题?
第一、将MySQL的空闲时间设置短一些。设置方法:找到MySQL安装目录下的my.ini文件,用记事本或UE或notepad++工具打开,在[mysqld]节点中加入以下设置:
interactive_timeout=120
wait_timeout=120
设置为2分钟,网上有些只提出了设置wait_timeout即可,但我在测试时,这个设置无效,仍然是8小时,我就将interactive_timeout也设置为2分钟,我目前不知道为什么,希望有知道能分享一下。设置完毕,重启MySQL服务。
打开MySQL命了窗口,输入show variables like '%timeout%';回车,即可查看是否设置生效,如果未生效,还是28800,则检查是否同时也设置了interactive_timeout。
第二、在C3P0的配置中,我们注释掉上面贴出的配置代码,启动程序,然后打开自己编写的系统或网站等,2分钟后随便做一个与数据库有关的操作,没错,就会出现下面的异常:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException:
The last packet successfully received from the server was 661,156 milliseconds ago. The last packet sent successfully to the server was 661,157 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem.;
SQL []; The last packet successfully received from the server was 661,156 milliseconds ago. The last packet sent successfully to the server was 661,157 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem.;
nested exception is com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was 661,156 milliseconds ago. The last packet sent successfully to the server was 661,157 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem.
这个异常是不是很熟悉,不解释,你们懂的。第三、加上上面C3P0的配置,注意,由于设置了MySQL的空闲时间是2分钟,因此我们要将配置文件中idleConnectionTestPeriod的value设置为1分钟,即60,不管设置多长,总之要小于MySQL的空闲时间。最后重启程序,再次测试,OK,问题解决了。
大功告成!!!!文字描述得不是很美,程序猿吧,懂的。
总结:解决问题的关键在于找到原因,只要了解其他连接池的配置,相信也能很快解决这个问题。
内容总结
以上是互联网集市为您收集整理的C3P0连接池配置解决MySQL连接的空闲时间超过8小时后自动断开连接_MySQL全部内容,希望文章能够帮你解决C3P0连接池配置解决MySQL连接的空闲时间超过8小时后自动断开连接_MySQL所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错,欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 gblab@vip.qq.com 举报,一经查实,本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。