使用using临时解释mysql性能计划；使用filesort;使用索引条件
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了使用using临时解释mysql性能计划；使用filesort;使用索引条件，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含14693字，纯文字阅读大概需要21分钟。
内容图文
我在线阅读了各种博客和文档,但只是想知道如何优化查询.我无法决定是否必须重写查询或添加索引以进行优化.
还添加创建表结构
CREATE TABLE `dsr_table` (
`DSR_VIA` CHAR(3) DEFAULT NULL,
`DSR_PULLDATA_FLAG` CHAR(1) DEFAULT 'O',
`DSR_BILLING_FLAG` CHAR(1) DEFAULT 'O',
`WH_FLAG` CHAR(1) DEFAULT 'O',
`ARCHIVE_FLAG` CHAR(1) NOT NULL DEFAULT 'O',
`DSR_BOOKING_TYPE` INT(2) DEFAULT NULL,
`DSR_BRANCH_CODE` CHAR(3) NOT NULL,
`DSR_CNNO` CHAR(12) NOT NULL,
`DSR_BOOKED_BY` CHAR(1) NOT NULL,
`DSR_CUST_CODE` VARCHAR(7) NOT NULL,
`DSR_CN_WEIGHT` DECIMAL(8,3) NOT NULL,
`DSR_CN_TYPE` CHAR(3) NOT NULL,
`DSR_DEST` CHAR(3) NOT NULL,
`DSR_MODE` CHAR(2) NOT NULL,
`DSR_NO_OF_PIECES` DECIMAL(3,0) NOT NULL,
`DSR_DEST_PIN` DECIMAL(6,0) DEFAULT NULL,
`DSR_BOOKING_DATE` DATE NOT NULL,
`DSR_AMT` DECIMAL(10,2) DEFAULT NULL,
`DSR_STATUS` CHAR(1) NOT NULL,
`DSR_POD_RECD` CHAR(1) DEFAULT NULL,
`DSR_TRANSMF_NO` VARCHAR(10) NOT NULL,
`DSR_BOOKING_TIME` CHAR(8) NOT NULL,
`DSR_DOX` CHAR(1) NOT NULL,
`DSR_SERVICE_TAX` DECIMAL(4,2) DEFAULT NULL,
`DSR_SPL_DISC` DECIMAL(10,2) DEFAULT NULL,
`DSR_CONTENTS` VARCHAR(255) DEFAULT NULL,
`DSR_REMARKS` VARCHAR(25) DEFAULT NULL,
`DSR_VALUE` VARCHAR(20) DEFAULT NULL,
`DSR_INVNO` VARCHAR(10) DEFAULT NULL,
`DSR_INVDATE` DATE DEFAULT NULL,
`MOD_DATE` DATE DEFAULT NULL,
`OFFICE_TYPE` CHAR(2) DEFAULT NULL,
`OFFICE_CODE` CHAR(3) DEFAULT NULL,
`DSR_REFNO` VARCHAR(50) DEFAULT NULL,
`MOD_TIME` DECIMAL(4,0) DEFAULT NULL,
`NODEID` VARCHAR(20) DEFAULT NULL,
`USERID` VARCHAR(7) DEFAULT NULL,
`TRANS_STATUS` CHAR(1) DEFAULT NULL,
`DSR_ACT_CUST_CODE` VARCHAR(11) DEFAULT NULL,
`DSR_MOBILE` VARCHAR(25) DEFAULT NULL,
`DSR_EMAIL` VARCHAR(50) DEFAULT NULL,
`DSR_NDX_PAPER` CHAR(1) DEFAULT NULL,
`DSR_PICKUP_TIME` DECIMAL(4,0) DEFAULT NULL,
`DSR_VOL_WEIGHT` DECIMAL(8,3) DEFAULT NULL,
`DSR_CAPTURED_WEIGHT` DECIMAL(8,3) DEFAULT NULL,
`DSR_PRODUCT` CHAR(3) DEFAULT NULL,
`DSR_TRANS_STATUS_XI` CHAR(1) DEFAULT 'A',
`DSR_TRANS_ID` DECIMAL(10,0) DEFAULT NULL,
`DSR_ID_TYPE` INT(2) DEFAULT NULL,
`DSR_ID_NUM` VARCHAR(50) DEFAULT NULL,
`DSR_WT_CAPTURED` INT(1) DEFAULT NULL,
`DSR_PUP_FRCODE` VARCHAR(7) DEFAULT NULL,
`DSR_TS_AMT` DECIMAL(10,2) DEFAULT NULL,
`DSR_FSC_PER` DECIMAL(4,2) DEFAULT NULL,
`DSR_RATE_ID` DECIMAL(8,0) DEFAULT NULL COMMENT 'Used to store RateID by which final rate is calculated',
`RECORD_ENTRY_DATETIME` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
`Record_creation_date` DATETIME DEFAULT NULL,
`Record_Arrival_date` DATETIME DEFAULT NULL,
`DSR_CONSIGNEE_MOBILE` VARCHAR(11) DEFAULT NULL,
`DSR_PREV_WEIGHT` DECIMAL(8,3) DEFAULT NULL,
`DSR_PREV_AMT` DECIMAL(10,2) DEFAULT NULL,
`DSR_GOR_REMARKS` VARCHAR(50) DEFAULT NULL,
`DSR_GOR_VOL_WT` DECIMAL(8,3) DEFAULT NULL,
PRIMARY KEY (`DSR_CNNO`),
KEY `idx_bcd_cnno_bkdate` (`DSR_BRANCH_CODE`,`DSR_CNNO`,`DSR_BOOKING_DATE`),
KEY `idx_dsr_bkdate` (`DSR_BOOKING_DATE`),
KEY `idx_dsr_custcode` (`DSR_CUST_CODE`),
KEY `idx_dsr_invoiceno` (`DSR_INVNO`),
KEY `idx_dsr_mdate` (`MOD_DATE`),
KEY `idx_dsr_bookdby_ccd_cnno` (`DSR_BOOKED_BY`,`DSR_CUST_CODE`,`DSR_CNNO`),
KEY `idx_dsr_bkdby_ccd_bkd_stat` (`DSR_BOOKED_BY`,`DSR_CUST_CODE`,`DSR_BOOKING_DATE`,`DSR_STATUS`),
KEY `idx_dsr_refno` (`DSR_REFNO`),
KEY `idx_dsr_txi_stat_mdate` (`DSR_TRANS_STATUS_XI`,`DSR_STATUS`,`MOD_DATE`),
KEY `idx_dsr_trans_id` (`DSR_TRANS_ID`),
KEY `idx_dsr_inv_date` (`DSR_INVDATE`),
KEY `IDX_Create_arr_date` (`Record_creation_date`,`Record_Arrival_date`)
) ENGINE=INNODB DEFAULT CHARSET=latin1
这是我要执行的查询.请帮我.
select ob.BRANCH_CITY orig_city,dstb.BRANCH_CITY dest_city,round(sum(CASE WHEN left(dsr_cnno, 1) IN ('V', 'E', 'X') THEN
IFNULL(value, 0) ELSE 0 END),2) Premium,
round(sum(CASE WHEN left(dsr_cnno, 1) NOT IN ('V', 'E', 'X') THEN IFNULL(value, 0) ELSE 0 END),2) Non_Premium
from ( select DSR_BRANCH_CODE,dsr_cnno,DSR_AMT,
((dsr_amt) +((((dsr_amt)-ifnull((select max(ndsr_ins_amt) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0)-ifnull((select max(ndsr_serv_charge) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0) -ifnull((select sum(dr_extra_amt) from dsr_revenue where dr_cnno=dsr_cnno ),0))-(((dsr_amt)-ifnull((select max(ndsr_ins_amt) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0) -ifnull((select max(ndsr_serv_charge) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0)
-ifnull((select sum(dr_extra_amt) from dsr_revenue where dr_cnno=dsr_cnno ),0) )*ifnull(((select fr_discount from fr_mas where fr_Code=dsr_cust_code)),0)/100)) *ifnull(((select (case when dsr_invdate <'2017-05-01' then ifnull(fr_fsc_per,0) else 30 end) from fr_mas where fr_code=dsr_cust_code limit 1)),0)/100)) as value, dsr_cust_code
,dsr_dest_pin from dsr_table d where dsr_booking_date BETWEEN '2017-05-01' AND '2017-06-30' AND LENGTH(dsr_cnno)=9
AND DSR_BOOKED_BY ='F' AND dsr_status<>'R' AND dsr_cnno NOT LIKE 'J%' AND dsr_cnno NOT LIKE '@%'
AND dsr_cnno NOT LIKE '576%' AND dsr_cnno NOT LIKE 'I3%' AND dsr_cnno NOT LIKE '7%'
AND dsr_cnno NOT LIKE 'N%' and d.dsr_dest_pin>0) zz
inner join fr_mas f on f.FR_CODE=zz.dsr_cust_code
inner join branch_mas ob on ob.BRANCH_CODE=zz.dsr_branch_code and ob.BRANCH_LOC='L'
inner join serv_dest_mas dm on dm.SERV_PIN=zz.dsr_dest_pin
inner join branch_mas dstb on dstb.BRANCH_CODE=dm.SERV_BRANCH and dstb.BRANCH_LOC='L'
where dstb.BRANCH_CITY in ('HYD','DEL','AMD','GGN','BLR','PNQ','MUM','CHE','CCU','NOD')
and ob.BRANCH_CITY in('HYD','DEL','AMD','GGN','BLR','PNQ','MUM','CHE','CCU','NOD')
group by orig_city,dest_city ;
这是我的解释计划：
id select_type table type possible_keys key key_len ref rows Extra
------ ------------------ ------------- ------ ------------------------------------------------------------------ ------------------------ ------- ------------------------- --------- ---------------------------------------------------------------------
1 PRIMARY ob range PRIMARY,FK_BRM_CITYMAS FK_BRM_CITYMAS 4 (NULL) 10 Using index condition; Using where; Using temporary; Using filesort
1 PRIMARY <derived2> ref <auto_key2> <auto_key2> 3 billingdb.ob.BRANCH_CODE 319051 Using where
1 PRIMARY f eq_ref PRIMARY PRIMARY 9 zz.dsr_cust_code 1 Using index
1 PRIMARY dm ref PRIMARY,IDX_SDM_SERVPIN_STATUS1 IDX_SDM_SERVPIN_STATUS1 3 zz.dsr_dest_pin 2 Using index
1 PRIMARY dstb eq_ref PRIMARY,FK_BRM_CITYMAS PRIMARY 3 billingdb.dm.SERV_BRANCH 1 Using where
2 DERIVED d ref idx_dsr_bkdate,idx_dsr_bookdby_ccd_cnno,idx_dsr_bkdby_ccd_bkd_stat idx_dsr_bookdby_ccd_cnno 1 const 182365315 Using index condition; Using where
10 DEPENDENT SUBQUERY fr_mas eq_ref PRIMARY PRIMARY 9 billingdb.d.DSR_CUST_CODE 1 (NULL)
9 DEPENDENT SUBQUERY fr_mas eq_ref PRIMARY PRIMARY 9 billingdb.d.DSR_CUST_CODE 1 (NULL)
8 DEPENDENT SUBQUERY dsr_revenue ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
7 DEPENDENT SUBQUERY ndx_dsr_table eq_ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
6 DEPENDENT SUBQUERY ndx_dsr_table eq_ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
5 DEPENDENT SUBQUERY dsr_revenue ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
4 DEPENDENT SUBQUERY ndx_dsr_table eq_ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
3 DEPENDENT SUBQUERY ndx_dsr_table eq_ref PRIMARY PRIMARY 12 billingdb.d.DSR_CNNO 1 (NULL)
更新
我也尝试在INDEX(DSR_BOOKED_BY,dsr_booking_date,
dsr_cnno,dsr_status,dsr_cnno,dsr_dist_pin,id),但没有运气.
服务器的RAM大小为16GB,innodb缓冲池大小为12GB
这是将近8个小时的查询,但最终没有结果
UPDATE
适用于特定日期的查询：
SELECT ob.BRANCH_CITY orig_city,
(
SELECT LEFT(branch_code,1)
FROM branch_mas c,serv_dest_mas b
WHERE c.branch_loc='L'
AND LEFT(c.branch_code,1) IN ('K','H','C','B','M','A',
'P','N','S','L'
)
AND c.branch_code=b.serv_branch
AND b.serv_pin=zz.dsr_dest_pin
LIMIT 1
) dest_city,
ROUND(SUM(CASE WHEN LEFT(dsr_cnno, 1) IN ('V', 'E', 'X')
THEN IFNULL(VALUE,
0) ELSE 0 END),2) Premium,
ROUND(SUM(CASE WHEN LEFT(dsr_cnno,
1) NOT IN ('V', 'E', 'X') THEN IFNULL(VALUE,
0) ELSE 0 END),2
) Non_Premium FROM
(
SELECT DSR_BRANCH_CODE,dsr_cnno,DSR_AMT,
((dsr_amt) +((((dsr_amt) -IFNULL( (
SELECT MAX(ndsr_serv_charge)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0) -IFNULL(
(
SELECT SUM(dr_extra_amt)
FROM dsr_revenue
WHERE dr_cnno=dsr_cnno ),0))-(((dsr_amt) -IFNULL(
(
SELECT MAX(ndsr_ins_amt)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0
) -IFNULL(
(
SELECT MAX(ndsr_serv_charge)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0
) -IFNULL(
(
SELECT SUM(dr_extra_amt)
FROM dsr_revenue
WHERE dr_cnno=dsr_cnno ),0)
) *IFNULL((
(
SELECT fr_discount
FROM fr_mas
WHERE fr_Code=dsr_cust_code)),0)/100)) *
IFNULL(( (
SELECT (CASE WHEN dsr_invdate <'2017-05-01'
THEN IFNULL(fr_fsc_per,
0) ELSE 30 END )
FROM fr_mas
WHERE fr_code=dsr_cust_code
LIMIT 1)),0)/100)
) AS VALUE, dsr_cust_code, dsr_dest_pin
FROM dsr_table d
WHERE dsr_booking_date = '2017-04-30'
AND LENGTH(dsr_cnno)=9
AND DSR_BOOKED_BY ='F'
AND dsr_status<>'R'
AND d.dsr_dest_pin>0
) zz
INNER JOIN fr_mas f ON f.FR_CODE=zz.dsr_cust_code
INNER JOIN branch_mas ob ON ob.BRANCH_CODE=zz.dsr_branch_code
AND ob.BRANCH_LOC='L'
WHERE ob.BRANCH_CITY IN('HYD','DEL','AMD','GGN','BLR','PNQ',
'MUM','CHE','CCU','NOD'
)
AND d.dsr_cnno = f.dsr_cnno
如果我们指定一个月,则上面的代码不适用于日期范围：
SELECT ob.BRANCH_CITY orig_city,
(
SELECT LEFT(branch_code,1)
FROM branch_mas c,serv_dest_mas b
WHERE c.branch_loc='L'
AND LEFT(c.branch_code,1) IN ('K','H','C','B','M','A',
'P','N','S','L'
)
AND c.branch_code=b.serv_branch
AND b.serv_pin=zz.dsr_dest_pin
LIMIT 1
) dest_city,
ROUND(SUM(CASE WHEN LEFT(dsr_cnno, 1) IN ('V', 'E', 'X')
THEN IFNULL(VALUE,
0) ELSE 0 END),2) Premium,
ROUND(SUM(CASE WHEN LEFT(dsr_cnno,
1) NOT IN ('V', 'E', 'X') THEN IFNULL(VALUE,
0) ELSE 0 END),2
) Non_Premium FROM
(
SELECT DSR_BRANCH_CODE,dsr_cnno,DSR_AMT,
((dsr_amt) +((((dsr_amt) -IFNULL( (
SELECT MAX(ndsr_serv_charge)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0) -IFNULL(
(
SELECT SUM(dr_extra_amt)
FROM dsr_revenue
WHERE dr_cnno=dsr_cnno ),0))-(((dsr_amt) -IFNULL(
(
SELECT MAX(ndsr_ins_amt)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0
) -IFNULL(
(
SELECT MAX(ndsr_serv_charge)
FROM ndx_dsr_table
WHERE ndsr_cnno=dsr_cnno ),0
) -IFNULL(
(
SELECT SUM(dr_extra_amt)
FROM dsr_revenue
WHERE dr_cnno=dsr_cnno ),0)
) *IFNULL((
(
SELECT fr_discount
FROM fr_mas
WHERE fr_Code=dsr_cust_code)),0)/100)
) *IFNULL((
(
SELECT (CASE WHEN dsr_invdate <'2017-05-01'
THEN IFNULL(fr_fsc_per,
0) ELSE 30 END )
FROM fr_mas
WHERE fr_code=dsr_cust_code
LIMIT 1)),0)/100)
) AS VALUE, dsr_cust_code, dsr_dest_pin
FROM dsr_table d
WHERE dsr_booking_date = '2017-04-30'
AND '2017-05-30'
AND LENGTH(dsr_cnno)=9
AND DSR_BOOKED_BY ='F'
AND dsr_status<>'R'
AND d.dsr_dest_pin>0
) zz
INNER JOIN fr_mas f ON f.FR_CODE=zz.dsr_cust_code
INNER JOIN branch_mas ob ON ob.BRANCH_CODE=zz.dsr_branch_code
AND ob.BRANCH_LOC='L'
WHERE ob.BRANCH_CITY IN('HYD','DEL','AMD','GGN','BLR','PNQ',
'MUM','CHE','CCU','NOD'
)
AND d.dsr_cnno = f.dsr_cnno
解决方法:
请提供显示创建表.
主要过滤器似乎是
where dsr_booking_date BETWEEN '2017-05-01' AND '2017-06-30'
AND LENGTH(dsr_cnno)=9
AND DSR_BOOKED_BY ='F'
AND dsr_status<>'R'
AND dsr_cnno NOT LIKE 'J%'
AND dsr_cnno NOT LIKE '@%'
AND dsr_cnno NOT LIKE '576%'
AND dsr_cnno NOT LIKE 'I3%'
AND dsr_cnno NOT LIKE '7%'
AND dsr_cnno NOT LIKE 'N%'
and d.dsr_dest_pin>0
可能唯一有用的索引是按此顺序：
INDEX(DSR_BOOKED_BY, dsr_booking_date)
像
ifnull((select max(ndsr_ins_amt) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0)-
ifnull((select max(ndsr_serv_charge) from ndx_dsr_table where ndsr_cnno=dsr_cnno ),0) -
应该一起做.考虑类似
ifnull(mm.max_nia), 0) -
ifnull(mm.max_nsc), 0) .
...
LEFT JOIN ( SELECT max(ndsr_ins_amt) AS max_nia,
max(ndsr_serv_charge) AS max_nsc
from ndx_dsr_table
) AS mm ON ndsr_cnno=dsr_cnno
或者,如有必要,使用该子查询构建一个临时表,然后向其左联接.
(由于您尚未使用表所在的字段来限定每一列,因此我无法更具体地说明.)
您是否为各种JOIN提供合适的“复合”索引？
根据说明,它正在扫描182M行的dsr_table.因此,上面的索引可能会有所帮助(如果您还没有类似的索引.)
我犹豫建议这么长的索引,但这可能会有所帮助：
INDEX(DSR_BOOKED_BY, dsr_booking_date, -- these first, in this order
dsr_cnno, dsr_status, dsr_cnno, dsr_dist_pin, -- in any order
id) -- (whatever the PK of the table is); last
第二个查询中的错误问题
WHERE dsr_booking_date = '2017-04-30'
AND '2017-05-30'
也许您的意思是31天：
WHERE dsr_booking_date BETWEEN '2017-04-30'
AND '2017-05-30'
或大约2天：
WHERE dsr_booking_date IN ('2017-04-30', '2017-05-30')
你拥有的是
WHERE dsr_booking_date = '2017-04-30' -- test for one day
AND true -- that's how '2017-05-30' is interpreted
内容总结
以上是互联网集市为您收集整理的使用using临时解释mysql性能计划；使用filesort;使用索引条件全部内容，希望文章能够帮你解决使用using临时解释mysql性能计划；使用filesort;使用索引条件所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。
来源：【匿名】