meshroom和alicevision在Ubuntu16上的安装过程

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了meshroom和alicevision在Ubuntu16上的安装过程，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含4977字，纯文字阅读大概需要8分钟。

内容图文

meshroom是一个比较好的开源三维重建软件，以alicevision为基础。

alicevision

cmake

首先安装升级cmake版本，ubuntu16自带cmake为3.5，将其升级到3.16

sudo apt-get remove cmake
cd /usr/src
wget https://github.com/Kitware/CMake/releases/download/v3.16.0/cmake-3.16.0.tar.gz
tar -zxvf cmake-3.16.0.tar.gz
cd cmake-3.16.0
apt install libssl-dev build-essential

./bootstrap && make && sudo make install

openexr

openexr的版本在alicevision中有指定，我需要的是2.5.3的版本

wget -c https://github.com/AcademySoftwareFoundation/openexr/archive/v2.5.3.zip    
unzip -q v2.5.3.zip 
cd openexr-2.5.3 && mkdir build && cd build
cmake -LAH .. && make -j4 && sudo make install

boost1.74

wget -c https://dl.bintray.com/boostorg/release/1.74.0/source/boost_1_74_0.tar.gz 
tar -zxvf boost_1_74_0.tar.gz    
cd boost_1_74_0 
./bootstrap.sh
sudo ./b2 install

openimageio

https://github.com/OpenImageIO/oiio/blob/master/INSTALL.md
我这里没有绑定python

git clone --depth 1 https://github.com/OpenImageIO/oiio.git 
cd oiio && mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Release -DSTOP_ON_WARNING=0  -DUSE_PYTHON=0 ..
make -j4 && sudo make install && make clean

eigen 3.3.7

alicevision中指定eigen版本3.3.7
下载

wget -c https://gitlab.com/libeigen/eigen/-/archive/3.3.7/eigen-3.3.7.zip
unzip -q eigen-3.3.7.zip
cd eigen-3.3.7 && mkdir build && cd build 
cmake -DCMAKE_BUILD_TYPE=Release  .. 
sudo make install
sudo cp -r /usr/local/include/eigen3 /usr/include 

ceres 1.14.0

http://ceres-solver.org/installation.html
alicevision中指定ceres版本1.14.0

sudo apt-get install libatlas-base-dev
sudo apt-get install libgoogle-glog-dev libgflags-dev
sudo apt-get install libsuitesparse-dev

wget -c https://github.com/ceres-solver/ceres-solver/archive/1.14.0.zip
unzip -q 1.14.0.zip
cd ceres-solver-1.14.0 && mkdir build && cd build
cmake .. && make -j4 && sudo make install && make clean

Geogram 1.7.5

alicevision中指定geogram版本1.7.5
http://alice.loria.fr/software/geogram/doc/html/geogram_compiling.html

wget -c https://gforge.inria.fr/frs/download.php/file/38315/geogram_1.7.5.zip   
sh -f configure.sh
cd build/Linux64-gcc-dynamic-Release 
make -j4
sudo make install

opengv

git clone --depth 1 https://github.com/alicevision/opengv.git --branch=cmake_fix_install
cd opengv && mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Release .. && make -j4
sudo make install 

opencv4.1.0

sudo apt -y remove x264 libx264-dev
## Install dependencies
sudo apt -y install build-essential checkinstall cmake pkg-config yasm
sudo apt -y install git gfortran
sudo apt -y install libjpeg8-dev libjasper-dev libpng12-dev
sudo apt -y install libtiff5-dev 
sudo apt -y install libtiff-dev

sudo apt -y install libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev
sudo apt -y install libxine2-dev libv4l-dev
cd /usr/include/linux
sudo ln -s -f ../libv4l1-videodev.h videodev.h
cd $cwd
 
sudo apt -y install libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev
sudo apt -y install libgtk2.0-dev libtbb-dev qt5-default

sudo apt -y install libatlas-base-dev
sudo apt -y install libfaac-dev libmp3lame-dev libtheora-dev
sudo apt -y install libvorbis-dev libxvidcore-dev
sudo apt -y install libopencore-amrnb-dev libopencore-amrwb-dev
sudo apt -y install libavresample-dev
sudo apt -y install x264 v4l-utils
 
# Optional dependencies
sudo apt -y install libprotobuf-dev protobuf-compiler
sudo apt -y install libgoogle-glog-dev libgflags-dev
sudo apt -y install libgphoto2-dev libeigen3-dev libhdf5-dev doxygen

alicevision中指定opencv版本4.1.0，并有contrib

mkdir opencv && cd opencv
wget -c https://github.com/opencv/opencv/archive/4.1.0.tar.gz -O opencv.tar.gz
wget -c https://github.com/opencv/opencv_contrib/archive/4.1.0.tar.gz -O contrib.tar.gz
mkdir build && build

由于在opencv3之后，使用cmake都会从github上下载ippicv, vgg等，那么

pchain cmake -DCMAKE_BUILD_TYPE=RELEASE\
      -DWITH_TBB=ON\
      -DWITH_V4L=ON\
      -DWITH_QT=ON\
      -DWITH_OPENGL=ON\
      -DOPENCV_EXTRA_MODULES_PATH=../opencv_contrib-4.1.0/modules\
      -DWITH_CUDA=ON\
      -DBUILD_opencv_cudacodec=OFF\
      -DENABLE_FAST_MATH=1\
      -DCUDA_FAST_MATH=1\
      -DWITH_CUBLAS=1\
      -DBUILD_EXAMPLES=OFF\
      ../opencv-4.1.0
make -j8
sudo make install && make clean

编译安装

git clone https://github.com/alicevision/AliceVision.git --recursive
cd AliceVision && mkdir build && cd build
cmake -DCMAKE_BUILD_TYPE=Release .. && make -j4

meshroom

python 环境

Linux: Python 3 (>=3.5) or Python 2 (>= 2.7)

conda create -n meshroom python=3.6
conda activate meshroom
pip install -U pip
pip install -r requirements.txt -r dev_requirements.txt

Qt 插件

QT5

https://mirrors.tuna.tsinghua.edu.cn/qt/archive/qt/5.13/5.13.2/

chmod +x qt-opensource-linux-x64-5.13.2.run
sudo ./qt-opensource-linux-x64-5.13.2.run

qt的安装地址在/opt

这一步时间会比较长

QmlAlembic

首先安装Alembic

git clone --depth 1 https://github.com/alembic/alembic 
cd alembic
mkdir build && cd build
make -j4
sudo make install

export QT_DIR=/opt/qt/5.11.0/gcc_64
cmake ..  -DCMAKE_PREFIX_PATH=$QT_DIR  -DCMAKE_BUILD_TYPE=Release
sudo make install

安装地址为/usr/local/qml

QtOIIO

QtAliceVision

内容总结

以上是互联网集市为您收集整理的meshroom和alicevision在Ubuntu16上的安装过程全部内容，希望文章能够帮你解决meshroom和alicevision在Ubuntu16上的安装过程所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端

---