centos7安装supervisor详细教程
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了centos7安装supervisor详细教程，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含12605字，纯文字阅读大概需要19分钟。
内容图文
解释一些让人容易疑惑名词：
supervisor：要安装的软件的名称。
supervisord：装好supervisor软件后，supervisord用于启动supervisor服务。
supervisorctl：用于管理supervisor配置文件中program。
方法一、使用yum命令安装（推荐）
$ sudo su - #切换为root用户
# yum install epel-release
# yum install -y supervisor
# systemctl enable supervisord # 开机自启动
# systemctl start supervisord # 启动supervisord服务
# systemctl status supervisord # 查看supervisord服务状态
# ps -ef|grep supervisord # 查看是否存在supervisord进程
1
2
3
4
5
6
7
8
9
方法二、使用pip手工安装配置(不推荐)
准备工作
确认9001端口未被占用，如果9001端口被占用，请将后面提到的supervisord.conf文件中的9001替换为可用端口号，如7001。
一、安装supervisor
切换为root用户
$ sudo su -
1
为python2.7安装pip（supervisor只支持python2.7）
(1) 下载pip
# wget https://bootstrap.pypa.io/get-pip.py --no-check-certificate
1
(2) 安装pip
# python2.7 get-pip.py
如果遇到psutil相关的报错，参考https://www.cnblogs.com/chentq/p/4954135.html
1
2
安装supervisor
# pip2 install supervisor
# #可能遇到的问题及解决办法：
# #如果遇到NameError: name 'sys_platform' is not defined
# #运行如下命令即可（但是也会报错，不用理会）
# #pip2 install --upgrade distribute,
# #然后再卸载supervisor，
# #pip2 uninstall supervisor，
# #重装supervisor,
# #pip2 install supervisor。
# #参考http://www.yuchaoshui.com/post/CentOS6-Python-installation
1
2
3
4
5
6
7
8
9
10
11
创建supervisor所需目录
# mkdir /etc/supervisord.d/
1
创建supervisor配置文件
# echo_supervisord_conf > /etc/supervisord.conf
1
编辑supervisord.conf文件
# vim /etc/supervisord.conf
1
文件内容如下(直接展示完整的文件内容，建议直接复制粘贴，如果想知道详细改动，可逐行对比)
; Sample supervisor config file.
;
; For more information on the config file, please see:
; http://supervisord.org/configuration.html
;
; Notes:
; - Shell expansion ("~" or "$HOME") is not supported. Environment
; variables can be expanded using this syntax: "%(ENV_HOME)s".
; - Quotes around values are not supported, except in the case of
; the environment= options as shown below.
; - Comments must have a leading space: "a=b ;comment" not "a=b;comment".
; - Command will be truncated if it looks like a config file comment, e.g.
; "command=bash -c 'foo ; bar'" will truncate to "command=bash -c 'foo ".
[unix_http_server]
file=/var/run/supervisor.sock ; the path to the socket file
;chmod=0700 ; socket file mode (default 0700)
;chown=nobody:nogroup ; socket file uid:gid owner
;username=user ; default is no username (open server)
;password=123 ; default is no password (open server)
[inet_http_server] ; inet (TCP) server disabled by default
port=127.0.0.1:9001 ; ip_address:port specifier, *:port for all iface
;username=user ; default is no username (open server)
;password=123 ; default is no password (open server)
[supervisord]
logfile=/var/log/supervisord.log ; main log file; default $CWD/supervisord.log
logfile_maxbytes=50MB ; max main logfile bytes b4 rotation; default 50MB
logfile_backups=10 ; # of main logfile backups; 0 means none, default 10
loglevel=info ; log level; default info; others: debug,warn,trace
pidfile=/var/run/supervisord.pid ; supervisord pidfile; default supervisord.pid
nodaemon=false ; start in foreground if true; default false
minfds=1024 ; min. avail startup file descriptors; default 1024
minprocs=200 ; min. avail process descriptors;default 200
;umask=022 ; process file creation umask; default 022
;user=chrism ; default is current user, required if root
;identifier=supervisor ; supervisord identifier, default is 'supervisor'
;directory=/tmp ; default is not to cd during start
;nocleanup=true ; don't clean up tempfiles at start; default false
;childlogdir=/tmp ; 'AUTO' child log dir, default $TEMP
;environment=KEY="value" ; key value pairs to add to environment
;strip_ansi=false ; strip ansi escape codes in logs; def. false
; The rpcinterface:supervisor section must remain in the config file for
; RPC (supervisorctl/web interface) to work. Additional interfaces may be
; added by defining them in separate [rpcinterface:x] sections.
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
; The supervisorctl section configures how supervisorctl will connect to
; supervisord. configure it match the settings in either the unix_http_server
; or inet_http_server section.
[supervisorctl]
serverurl=unix:///var/run/supervisor.sock ; use a unix:// URL for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris ; should be same as in [*_http_server] if set
;password=123 ; should be same as in [*_http_server] if set
;prompt=mysupervisor ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history ; use readline history if available
; The sample program section below shows all possible program subsection values.
; Create one or more 'real' program: sections to be able to control them under
; supervisor.
;[program:theprogramname]
;command=/bin/cat ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=999 ; the relative start priority (default 999)
;autostart=true ; start at supervisord start (default: true)
;startsecs=1 ; # of secs prog must stay up to be running (def. 1)
;startretries=3 ; max # of serial start failures when starting (default 3)
;autorestart=unexpected ; when to restart if exited after running (def: unexpected)
;exitcodes=0,2 ; 'expected' exit codes used with autorestart (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false ; send stop signal to the UNIX process group (default false)
;killasgroup=false ; SIGKILL the UNIX process group (def false)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (0 means none, default 10)
;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (0 means none, default 10)
;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A="1",B="2" ; process environment additions (def no adds)
;serverurl=AUTO ; override serverurl computation (childutils)
; The sample eventlistener section below shows all possible eventlistener
; subsection values. Create one or more 'real' eventlistener: sections to be
; able to handle event notifications sent by supervisord.
;[eventlistener:theeventlistenername]
;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;events=EVENT ; event notif. types to subscribe to (req'd)
;buffer_size=10 ; event buffer queue size (default 10)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=-1 ; the relative start priority (default -1)
;autostart=true ; start at supervisord start (default: true)
;startsecs=1 ; # of secs prog must stay up to be running (def. 1)
;startretries=3 ; max # of serial start failures when starting (default 3)
;autorestart=unexpected ; autorestart if exited after running (def: unexpected)
;exitcodes=0,2 ; 'expected' exit codes used with autorestart (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false ; send stop signal to the UNIX process group (default false)
;killasgroup=false ; SIGKILL the UNIX process group (def false)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=false ; redirect_stderr=true is not allowed for eventlisteners
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (0 means none, default 10)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (0 means none, default 10)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A="1",B="2" ; process environment additions
;serverurl=AUTO ; override serverurl computation (childutils)
; The sample group section below shows all possible group values. Create one
; or more 'real' group: sections to create "heterogeneous" process groups.
;[group:thegroupname]
;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions
;priority=999 ; the relative start priority (default 999)
; The [include] section can just contain the "files" setting. This
; setting can list multiple files (separated by whitespace or
; newlines). It can also contain wildcards. The filenames are
; interpreted as relative to this file. Included files *cannot*
; include files themselves.
[include]
files = /etc/supervisord.d/*.ini
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
保存退出
Esc:x
1
启动supervisor
# supervisord -c /etc/supervisord.conf
1
查看supervisor是否启动成功
# ps -ef|grep supervisord
root 932 1 0 May10 ? 00:00:09 /bin/python2.7 /bin/supervisord -c /etc/supervisord.conf
root 7902 6814 0 10:29 pts/0 00:00:00 grep --color=auto supervisord
1
2
3
至此，安装supervisor就结束了
二、将supervisor配置为开机自启动服务
编辑服务文件
# vim /usr/lib/systemd/system/supervisord.service
1
内容如下
[Unit]
Description=Supervisor daemon
[Service]
Type=forking
PIDFile=/var/run/supervisord.pid
ExecStart=/bin/supervisord -c /etc/supervisord.conf
ExecStop=/bin/supervisorctl shutdown
ExecReload=/bin/supervisorctl reload
KillMode=process
Restart=on-failure
RestartSec=42s
[Install]
WantedBy=multi-user.target
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
保存退出
Esc:x
1
启动服务
# systemctl enable supervisord
1
查看是否启动
# systemctl is-enabled supervisord
enabled
1
2
成功之后，就可以使用如下命令管理supervisor服务了
# systemctl stop supervisord
# systemctl start supervisord
# systemctl status supervisord
# systemctl reload supervisord
# systemctl restart supervisord
1
2
3
4
5
至此，安装supervisor和配置为supervisor服务的工作就完成了。
补充：
因为我们的supervisor使用的是root安装，所以，对于非root用户，如果在执行
$ supervisord -c /etc/supervisord.conf
$ supervisorctl
1
2
命令时，会遇到访问被拒（Permission denied）的问题。
在命令最前面加上sudo即可
2. 如果更改了/etc/supervisord.conf中的端口号，原来的简写命令
# supervisorctl
1
就需要在后面指定supervsor配置文件位置，或指定supervisor服务运行的端口号
# supervisorctl -c /etc/supervisord.conf
# supervisorctl -s http://localhost:7001
1
2
否则会报连接拒绝
# supervisorctl
http://localhost:9001 refused connection
supervisor>
内容总结
以上是互联网集市为您收集整理的centos7安装supervisor详细教程全部内容，希望文章能够帮你解决centos7安装supervisor详细教程所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。