首页 / 负载均衡 / lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离

lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含13172字，纯文字阅读大概需要19分钟。

内容图文

1.项目拓扑：

                  lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离 - 文章图片

 

 

2.项目环境

IP地址 主机名 安装服务名称
192.168.253.40  keepalived

keepalived

lvs
192.168.253.50  keepalived-backup

keepalived

lvs
192.168.253.51  nginx1

 nginx

tomcat
192.168.253.52  nginx2

 nginx

tomcat
VIP 192.168.253.200

3.实验重点：

1.概述：此架构中keepalived所起到的作用就是对lvs架构中的调度器进行热备份。

怎样实现：

  两个负载均衡器同时安装keepalived，其中一台做master，另一台做backup，客户端请求master节点，master会发送数据包给backup节点，backup接收不到master发送的数据包时就表示master挂了，此时就有backup接管master节点，由此实现双机热备。

2.重点：LVS架构中需要通过ipvsadm工具来对ip_vs这个模块进行编写规则，使用keepalived+lvs时，不需要用到ipvsadm管理工具，不需要ipvsadm手动编写规则，用在keepalived的配置文件中指定配置项来将其取代;

3.keepalived的节点健康检查：keepalived可以通过对nginx的某个端口进行节点健康检查，来执行相应的操作，由notify_down配置项来完成

4.安装配置

全部：关闭防火墙，修改主机名，同步时间

1.
systemctl stop firewalld
systemctl disable firewalld 永久关闭
2.
[root@keepalived ~]# getenforce //查看selinux状态
[root@keepalived ~]# setenforce 0  //临时关闭

[root@keepalived ~]# getenforce 
Permissive

[root@keepalived ~]# vim /etc/selinux/config //永久关闭

Enforcing==》disabled

3.

hostnamectl set-hostname  keepalived  //修改主机名

su -l


4.

yum -y install ntp ntpdate

ntpdate cn.pool.ntp.org //同步时间

 

将系统时间写入到硬件时间

 

[root@surfer ~]#hwclock -w

 

 

1.keepalived

1.1安装keepalived

tar -xf keepalived-2.0.19.tar.gz 
mkdir -p /data/keepalived #创建安装目录
yum install openssl-devel gcc gcc-c++ make
cd keepalived-2.0.19/
./configure --prefix=/data/keepalived/
 make
 make install

1.2. 拷贝配置文件

  cd keepalived-2.0.19/keepalived/etc/
  cp -R init /data/keepalived/
  cp -R init /data/keepalived/etc/
  cp -R init.d/ /data/keepalived/etc/
  cp /data/keepalived/etc/init.d/keepalived /etc/init.d/
  cp /data/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
  mkdir /etc/keepalived
  cp /data/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
  cp /data/keepalived/sbin/keepalived /usr/sbin/
  systemctl start keepalived

 

1.3修改配置文件

ip:192.168.253.40

[root@keepalived]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id lvs_master    #服务器名称
}

vrrp_instance VI_1 { #定义vrrp热备实例
    state MASTER  #主
    interface ens33
    virtual_router_id 51    #master和slave必须一致
    priority 150  #优先级
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.253.200
    }

virtual_server 192.168.253.200 80 {
        delay_loop 6
        lb_algo rr
        lb_kind DR
        nat_mask 255.255.255.0
        persistence_timeout 0
        protocol TCP
    real_server 192.168.253.51 80 {
        weight 1
        notify_down /etc/keepalived/check.sh #对nginx的80端口进行节点健康检查

        TCP_CHECK {
        connect_port 80
        connect_timeout 10
        nb_get_retry 3
        delay_before_retry 3
          }
     }
    real_server 192.168.253.52 80 {
        weight 1
        notify_down /etc/keepalived/check.sh
        TCP_CHECK {
        connect_timeout 10
        nb_get_retry 3
        delay_before_retry 3

        connect_port 80
        }
    }
}

192.168.253.50

[root@keepalived-backup ~]# cat /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 192.168.200.1
   smtp_connect_timeout 30
   router_id lvs_backup
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    virtual_router_id 51
    priority 50
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.253.200
    }
}
virtual_server 192.168.253.200 80 {
    delay_loop 6
    lb_algo rr
    lb_kind DR
    nat_mask 255.255.255.0
    persistence_timeout 0
    protocol TCP
    real_server 192.168.253.51 80 {
        weight 1
    notify_down /etc/keepalived/check.sh
        TCP_CHECK {
        connect_timeout 10
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
    }
    real_server 192.168.253.52 80 {
        weight 1
    notify_down /etc/keepalived/check.sh #对nginx的80端口进行节点健康检查
        TCP_CHECK {
        connect_timeout 10
        nb_get_retry 3
        delay_before_retry 3
        connect_port 80
        }
     }
}

测试：

[root@keepalived ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether 00:0c:29:2d:07:5f brd ff:ff:ff:ff:ff:ff
    inet 192.168.253.40/24 brd 192.168.253.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet 192.168.253.200/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe2d:75f/64 scope link 
       valid_lft forever preferred_lft forever

[root@keepalived ~]# systemctl stop keepalived

ip a 无192.168.253.200

在keepaived-backup查看

[root@keepalived-backup ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether 00:0c:29:45:78:34 brd ff:ff:ff:ff:ff:ff
    inet 192.168.253.50/24 brd 192.168.253.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet 192.168.253.200/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe45:7834/64 scope link 
      valid_lft forever preferred_lft forever

 

[root@keepalived ~]# cat /etc/keepalived/check.sh
#!/bin/bash

echo -e " nginx1(192.168.253.51) or nginx2(192.168.253.52) is down on $(date +%F-%T)" >/root/check_nginx.log

 

2.nginx

2.1安装nginx

请出门左转：https://www.cnblogs.com/lanist/p/12752504.html

2.2 在nginx+tomcat上共享VIP

vim  /etc/init.d/realserver

#!/bin/bash

VIP=192.168.253.200

/etc/rc.d/init.d/functions

case "$1" in
start)
       /sbin/ifconfig lo:0 $VIP netmask 255.255.255.255 broadcast $VIP
       /sbin/route add -host $VIP dev lo:0
       echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce
       sysctl -p >/dev/null 2>&1
       echo "RealServer Start OK"
       ;;
stop)
       /sbin/ifconfig lo:0 down
       /sbin/route del $VIP >/dev/null 2>&1
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore
       echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce
       echo "RealServer Stoped"
       ;;
*)
       echo "Usage: $0 {start|stop}"
       exit 1
esac
exit 0

[root@nginx2]# chmod +x  /etc/init.d/realserver 

设为开机自启

[root@nginx2]# chkconfig  --add realserver
service realserver does not support chkconfig

此时应该在脚本中添加2行：

# chkconfig: 2345 10 90
# description: realserver ....

注释#chkconfig 中2345是默认启动级别，10 90
10是启动优先级，90是停止优先级

[root@nginx1 ~]#chkconfig realserver on         #设置开机自启动此脚本
[root@nginx1 ~]# systemctl start realserver    #开启此脚本
RealServer Start OK    #表示启动成功!

[root@nginx1 ~]#ifconfig    #查看一下是否真的成功添加了lo:0接口

[root@nginx1 test]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 192.168.253.200/32 brd 192.168.253.200 scope global lo:0
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000
    link/ether 00:0c:29:f5:44:09 brd ff:ff:ff:ff:ff:ff
    inet 192.168.253.51/24 brd 192.168.253.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fef5:4409/64 scope link 
       valid_lft forever preferred_lft forever

 

chkconfig:
说明：

    用来设置服务的运行级信息，该设置并非立即启动，或者禁用制定服务。

常用参数：

--add           增加所指定的系统服务，让chkconfig指令得以管理它，并同时在系统启动的叙述文件内增加相关数据。
--del            删除所指定的系统服务，不再由chkconfig指令管理，并同时在系统启动的叙述文件内删除相关数据。

等级代号说明：
等级0表示：表示关机
等级1表示：单用户模式
等级2表示：无网络连接的多用户命令行模式
等级3表示：有网络连接的多用户命令行模式
等级4表示：不可用
等级5表示：带图形界面的多用户模式
等级6表示：重新启动

--list [name]： 显示所有运行级系统服务的运行状态信息（on或off）。如果指定了name，那么只显示指定的服务在不同运行级的状态。

 

2.3配置nginx1,nginx2

 cd /data/nginx/conf,新建proxy.conf，进行代理配置，内容如下：

# proxy.conf
proxy_redirect        off;
proxy_set_header    Host $host;
proxy_set_header    X-Real-IP $remote_addr;
client_max_body_size      10m;
client_body_buffer_size   128k;
proxy_connect_timeout     90;
proxy_send_timeout        90;
proxy_read_timeout        90;
proxy_buffer_size         4k;
proxy_buffers             4 32k;
proxy_busy_buffers_size   64k;
proxy_temp_file_write_size 64k;

 

vim /data/nginx/conf/nginx.conf

user  root;            #运行用户
worker_processes  1;        #启动进程,通常设置成和cpu的数量相等

#全局错误日志及PID文件
error_log  /usr/local/nginx/logs/error.log;
error_log  /usr/local/nginx/logs/error.log  notice;
error_log  /usr/local/nginx/logs/error.log  info;
pid        /usr/local/nginx/logs/nginx.pid;

# 工作模式及连接数上线
events {
    use epoll;            #epoll是多路复用IO(I/O Multiplexing)中的一种方式,但是仅用于linux2.6以上内核,可以大大提高nginx的性能
    worker_connections  1024;    #单个后台worker process进程的最大并发链接数
}

#设定http服务器,利用它的反向代理功能提供负载均衡支持
http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
    #                  '$status $body_bytes_sent "$http_referer" '
    #                  '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log  logs/access.log  main;

    #设定请求缓冲
    server_names_hash_bucket_size  128;
    client_header_buffer_size   32K;
    large_client_header_buffers  4 32k;
    # client_max_body_size   8m;
    
    #sendfile 指令指定 nginx 是否调用 sendfile 函数（zero copy 方式）来输出文件，对于普通应用，
    #必须设为 on,如果用来进行下载等应用磁盘IO重负载应用，可设置为 off，以平衡磁盘与网络I/O处理速度，降低系统的uptime.
    sendfile        on;
    tcp_nopush     on;
    tcp_nodelay    on;

    #连接超时时间
    #keepalive_timeout  0;
    keepalive_timeout  65;

    #开启gzip压缩，降低传输流量
    gzip  on;
    gzip_min_length    1k;
    gzip_buffers    4 16k;
    gzip_http_version  1.1;
    gzip_comp_level  2;
    gzip_types  text/plain application/x-javascript text/css  application/xml;
    gzip_vary on;

    #添加tomcat列表，负载均衡的服务器都放在这
    upstream tomcat_pool {
        #server tomcat地址:端口号 weight表示权值，权值越大，被分配的几率越大;
        server 192.168.253.51:8080 weight=4 max_fails=2 fail_timeout=30s;
    　  server 192.168.253.52:8080 weight=4 max_fails=2 fail_timeout=30s;
    }

    server {
        listen       80;        #监听端口    
        server_name  192.168.253.200; #对外提供服务的网址(域名或者ip)
    
    #默认请求设置
    location / {
        index index.jsp index.html index.htm;   #设定访问的默认首页
        root /usr/local/tomcat/webapps;    #站点根目录,此目录下存放我们的web项目
    }
    
    #charset koi8-r;

        #access_log  logs/host.access.log  main;

    
    #所有的jsp页面均由tomcat处理
    location ~ \.(jsp|jspx|dp)?$
    {
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_pass http://tomcat_pool;    #转向tomcat处理
    }
    
    #所有的静态文件直接读取不经过tomcat,nginx自己处理
    location ~ .*\.(htm|html|gif|jpg|jpeg|png|bmp|swf|ioc|rar|zip|txt|flv|mid|doc|ppt|pdf|xls|mp3|wma)$ 
    { 
        expires  30d;
    }
        location ~ .*\.(js|css)?$
        {
               expires  1h;
        }
        #log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '$status $body_bytes_sent "$http_referer"' '"$http_user_agent" $http_x_forwarded_for';
        #access_log  /usr/local/nginx/logs/ubitechtest.log access;#设定访问日志的存放路径     

        # redirect server error pages to the static page /50x.html
        #

    #定义错误提示页面
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }
    }
}

2.4 测试页面

lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离 - 文章图片

 

 

 

4.tomcat

安装

用ansible一键安装

在tomcat1和tomcat2的工作目录中创建test文件夹并写入jsp文件

[root@nginx1 ~]# cd /usr/local/tomcat/webapps/
[root@nginx1 webapps]# ls
docs  examples  host-manager  manager  ROOT 
[root@nginx1 webapps]# mkdir test
[root@nginx1 test]# vim love.jsp
<%@ page language="java" contentType="text/html; charset=UTF-8"
    pageEncoding="UTF-8"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>居居的页面 51</title>
</head>
<body>
<center>
 <h1 style="color: gray;">很简单的页面 51</h1>
 
 </center>
 <div class="bd">
            <ul class="infoList">
                <li><a href="#">喜庆J1911班7月20日开课</a><span>[7-20]</span></li>
            </ul>
        </div>
</body>
</html>


lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离 - 文章图片


 


lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离 - 文章图片


 


 


 


 



 



	

                
                
                
内容总结

                

                    

                        以上是互联网集市为您收集整理的lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离全部内容，希望文章能够帮你解决lvs负载均衡+keepalived+nginx+tomcat高可用+动静分离所遇到的程序开发问题。
                        如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
                    

                

                
内容备注

                

                    

                        版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
                    

                

                
内容手机端

                

                    

                    

                        
扫描二维码推送至手机访问。

                        
本文链接：https://qyyshop.com/info/938195.html

                    

                

                
                

                
来源：【匿名】