1、安装$ sudo apt-get install vsftpd2、配置1) 修改vsftpd.conf$ sudo nano /etc/vsftpd.conf按如下格式 修改,保存。#服务器监听
listen=YES
#禁止匿名访问
anonymous_enable=NO
#允许本地主机访问
local_enable=YES
#有写权限
write_enable=YES
dirmessage_enable=YES
use_localtime=YES
xferlog_enable=YES
connect_from_port_20=YES
ftpd_banner=co[S] balabalabala.
chroot_list_enable=YES
chroot_list_file=/etc/vsftpd....
1) 首先,默认的源http.kali.org 会自动帮你找镜像,问题是他找到了mirrors.neusoft.edu.cn , 这个源速度虽然快,却是有问题的。 安装不了cifs-utils2) 更改 /etc/apt/source.list ,把源改成 mirror.hust.edu.cn/kali3) apt-get update 之后 apt-get install cifs-utils4) make dir /media/tool5) 变更 /etc/fstab , //desktop01/tool /media/tool cifs username=xzy,password=pass,iocharset=utf8 0 06) mount /medial/tool 原...
很多时候,在一些配置更改后,postgresql服务无法重新启动.
是否有任何命令行工具允许在重新加载/重新启动服务之前检查pg_hba.conf和其他pg * .conf文件的语法,或者更改配置后更好?解决方法:你可以运行:postgres=# SELECT pg_reload_conf();pg_reload_conf
----------------t
(1 row)postgres=# ..来自psql内部.或者杀死-HUP postmaster进程.
然后,任何配置验证错误都将被放入Postgres日志文件中,并且不会重新加载配置.示例日志:2...
Debian不同于centos系统,网卡配置不是在/etc/sysconfig/network-scrip里面,而是在/etc/network/interfaces里面
1.Debian网络配置
配置网卡:修改vi /etc/network/interfaces 添加如下
auto eth0 #开机自动启动
iface eth0 inet static #静态IP设置
address 192.168.0.10 #本机IP
netmask 255.255.255.0 #子网掩码
gateway 192.168.0.1 #网关#这边是配置KVM虚拟机,所以配置为静态IP如果是用DHCP自动获取,请在配置文件里添加如...
MongoDB的性能最佳实践意味着:Most file systems will maintain metadata for the last time a file wasaccessed. While this may be useful for some applications, in a
database it means that the file system will issue a write every timethe database accesses a page, which will negatively impact the
performance and throughput of the system.对于mongoDB安装,我需要在我的Debian上禁用访问时间,该怎么做?解决方法...
我不希望我的系统使用夏令时.root@ali-debserver:~# cat /etc/timezone
Asia/Tehranroot@ali-debserver:~# cat /etc/default/rcS
#
# /etc/default/rcS
#
# Default settings for the scripts in /etc/rcS.d/
#
# For information about these variables see the rcS(5) manual page.
#
# This file belongs to the "initscripts" package.# delete files in /tmp during boot older than x days.
# '0' means always, -1 or 'infi...
我有一个bash脚本,其中包含以下“if”语句.问题是我不能让它在Debian上运行(它在Fedora和CentOS上运行良好).if [ $1 == "--daily" ] # <--- line 116
then
countDaily
elif [ $1 == "--monthly" ] # <--- line 119
then
countMonthly
fi运行之后:sh /home/kris/countsc.sh --daily我收到一个错误:/home/kris/countsc.sh: 116: [: --daily: unexpected operator
/home/kris/countsc.sh: 119: [: --daily: unexpected operator解决...
>> ' rel='nofollow' target='_blank'>2019独角兽企业重金招聘Python工程师标准>>>
先参考
sudo -imkdir /mntmount /dev/sda1 /mntgrub-install --force --no-floppy --root-directory=/mnt /dev/sda
?
然后在grub下或者参考下面的内容。
把livecd下casper目录中的vmlinuz和initrd.lz拷出来,放在windows随便一个分区的根目录下,然后启动时在菜单上按 c ,再grub>下输入grub>set root=(hd0,x) ---->这个是vmlinuz...
以前都是用etherconf来设置Debian里的网络,只要网卡驱动正常,设置网络也是很简单的。但今天动手换无线路由时,却发现Debian里已经没有这个小软件了。查了一下,发现原来是被清除出库了;找了个老版的,装上后设置一下,把网络全搞乱了,看来已经不能用了。只好记录点手工的办法:
设置IP,可以直接编辑/etc/network/interfaces这个文件,固定IP这样写:auto lo eth0
iface lo inet loopback
iface eth0 inet static
address 192....
由于Debian自带了python3,于是只需要安装pip
1.首先安装setuptools下载wget --no-check-certificate https://pypi.python.org/packages/source/s/setuptools/setuptools-19.6.tar.gz#md5=c607dd118eae682c44ed146367a17e26解压tar -zxvf setuptools-19.6.tar.gz转到其目录下cd setuptools-19.6python3 setup.py buildpython3 setup.py install
setuptools安装完成就可以安装pip了wget --no-check-certificate https://pypi.python...