NTFS(Windows)、ext4(RHEL6)和xfs(RHEL7)文件系统的误删除恢复和备份
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了NTFS(Windows)、ext4(RHEL6)和xfs(RHEL7)文件系统的误删除恢复和备份，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含16645字，纯文字阅读大概需要24分钟。
内容图文
前言
对于误删除文件的设备，要马上停止任何写的操作，防止删除的文件被覆盖，导致数据丢失！
恢复NTFS文件系统下误删的文件
以Windows为例，市面上能恢复的工具不少，例如EasyRecovery、易我数据恢复等等，本文就不再赘述，可以搜索！
恢复ext4文件系统下误删的文件
[root@linux-node1 ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel with disk identifier 0x7ce28911.
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-2610, default 1):
Using default value 1
Last cylinder, +cylinders or +size{K,M,G} (1-2610, default 2610): +1G
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@linux-node1 ~]# mkfs.ext4 /dev/sdb1
mke2fs 1.41.12 (17-May-2010)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
66384 inodes, 265064 blocks
13253 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=272629760
9 block groups
32768 blocks per group, 32768 fragments per group
7376 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 36 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[root@linux-node1 ~]# mkdir /sdb1
[root@linux-node1 ~]# mount /dev/sdb1 /sdb1/
[root@linux-node1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 19G 2.4G 16G 14% /
tmpfs 931M 0 931M 0% /dev/shm
/dev/sda1 190M 38M 142M 22% /boot
/dev/sdb1 988M 1.3M 935M 1% /sdb1
[root@linux-node1 ~]# cd /sdb1/
[root@linux-node1 sdb1]# ll
total 16
drwx------ 2 root root 16384 Oct 4 16:19 lost+found
[root@linux-node1 sdb1]# cp /etc/passwd .
[root@linux-node1 sdb1]# mkdir test
[root@linux-node1 sdb1]# mkdir test/a/b/c -p
[root@linux-node1 sdb1]# echo "1234">>1.txt
[root@linux-node1 sdb1]# ll
total 28
-rw-r--r-- 1 root root 5 Oct 4 16:24 1.txt
drwx------ 2 root root 16384 Oct 4 16:19 lost+found
-rw-r--r-- 1 root root 1929 Oct 4 16:23 passwd
drwxr-xr-x 3 root root 4096 Oct 4 16:23 test
[root@linux-node1 sdb1]# cp 1.txt ./test/a/
[root@linux-node1 sdb1]# cp 1.txt ./test/a/b/
[root@linux-node1 sdb1]# tree
.
├── 1.txt
├── lost+found
├── passwd
└── test
└── a
├── 1.txt
└── b
├── 1.txt
└── c
5 directories, 4 files
[root@linux-node1 sdb1]# cd
[root@linux-node1 ~]# rz extundelete-0.2.4.tar.bz2
[root@linux-node1 ~]# tar jxvf extundelete-0.2.4.tar.bz2
[root@linux-node1 ~]# cd extundelete-0.2.4
[root@linux-node1 extundelete-0.2.4]# yum install -y e2fsprogs-devel
[root@linux-node1 extundelete-0.2.4]# ./configure
[root@linux-node1 extundelete-0.2.4]# make -j 4
[root@linux-node1 extundelete-0.2.4]# make install
Making install in src
/usr/bin/install -c extundelete '/usr/local/bin'
[root@linux-node1 extundelete-0.2.4]# ll /usr/local/bin/
total 1160
-rwxr-xr-x 1 root root 1187263 Oct 7 21:34 extundelete
[root@linux-node1 ~]# yum install -y extundelete ##实在不行就用yum安装
[root@linux-node1 ~]# rm -rf /sdb1/*
[root@linux-node1 ~]# umount /sdb1/
[root@linux-node1 ~]# mkdir /root/back
[root@linux-node1 ~]# cd back/
方法1:通过inode恢复被删除的文件(ext4文件系统的分区根目录的inode值为2)
[root@linux-node1 back]# extundelete /dev/sdb1 --inode 2
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 9 groups loaded.
Group: 0
Contents of inode 2:
0000 | ed 41 00 00 00 10 00 00 07 0d ba 5b 0f 0d ba 5b | .A.........[...[
0010 | 0f 0d ba 5b 00 00 00 00 00 00 02 00 08 00 00 00 | ...[............
0020 | 00 00 00 00 07 00 00 00 4b 00 00 00 00 00 00 00 | ........K.......
0030 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
0040 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
0050 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
0060 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
0070 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
0080 | 1c 00 00 00 88 d8 89 9c 88 d8 89 9c 8c 33 43 58 | .............3CX
0090 | 19 cd b5 5b 00 00 00 00 00 00 00 00 00 00 00 00 | ...[............
00a0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00b0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00c0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00d0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00e0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
00f0 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 | ................
Inode is Allocated
File mode: 16877
Low 16 bits of Owner Uid: 0
Size in bytes: 4096
Access time: 1538919687
Creation time: 1538919695
Modification time: 1538919695
Deletion Time: 0
Low 16 bits of Group Id: 0
Links count: 2
Blocks count: 8
File flags: 0
File version (for NFS): 0
File ACL: 0
Directory ACL: 0
Fragment address: 0
Direct blocks: 75, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
Indirect block: 0
Double indirect block: 0
Triple indirect block: 0
File name | Inode number | Deleted status
. 2
.. 2
lost+found 11 Deleted
passwd 12 Deleted
test 7377 Deleted
1.txt 16 Deleted
[root@linux-node1 back]# extundelete /dev/sdb1 --restore-inode 12
[root@linux-node1 back]# tree
.
└── RECOVERED_FILES
└── file.12
1 directory, 1 file
[root@linux-node1 back]# diff /etc/passwd RECOVERED_FILES/file.12
[root@linux-node1 back]#
方法2:通过文件名恢复数据
[root@linux-node1 back]# extundelete /dev/sdb1 --restore-file passwd
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 9 groups loaded.
Loading journal descriptors ... 76 descriptors loaded.
Successfully restored file passwd
[root@linux-node1 back]# tree
.
└── RECOVERED_FILES
├── file.12
└── passwd
1 directory, 2 files
[root@linux-node1 back]# diff
diff diff3 diffstat
[root@linux-node1 back]# diff RECOVERED_FILES/
file.12 passwd
[root@linux-node1 back]# diff RECOVERED_FILES/passwd /etc/passwd
[root@linux-node1 back]#
方法3:通过目录恢复数据
[root@linux-node1 back]# extundelete /dev/sdb1 --restore-directory test
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 9 groups loaded.
Loading journal descriptors ... 76 descriptors loaded.
Searching for recoverable inodes in directory test ...
9 recoverable inodes found.
Looking through the directory structure for deleted files ...
4 recoverable inodes still lost.
[root@linux-node1 back]# tree
.
└── RECOVERED_FILES
├── file.12
├── passwd
└── test
└── a
├── 1.txt
└── b
└── 1.txt
4 directories, 4 files
[root@linux-node1 back]# cat RECOVERED_FILES/test/a/1.txt
1234
[root@linux-node1 back]# cat RECOVERED_FILES/test/a/b/1.txt
1234
方法4:恢复所有数据
[root@linux-node1 back]# rm -rf RECOVERED_FILES/
[root@linux-node1 back]# ll
total 0
[root@linux-node1 back]# extundelete /dev/sdb1 --restore-all
NOTICE: Extended attributes are not restored.
Loading filesystem metadata ... 9 groups loaded.
Loading journal descriptors ... 76 descriptors loaded.
Searching for recoverable inodes in directory / ...
9 recoverable inodes found.
Looking through the directory structure for deleted files ...
0 recoverable inodes still lost.
[root@linux-node1 back]# tree
.
└── RECOVERED_FILES
├── 1.txt
├── passwd
└── test
└── a
├── 1.txt
└── b
└── 1.txt
4 directories, 4 files
[root@linux-node1 back]# diff RECOVERED_FILES/passwd /etc/passwd
[root@linux-node1 back]# cat RECOVERED_FILES/test/a/1.txt
1234
[root@linux-node1 back]# cat RECOVERED_FILES/test/a/b/1.txt
1234
extundelete在恢复文件的时候不能自动创建空文件和目录
xfs文件系统中用xfsdump备份和恢复文件
一、挂载一块新的磁盘
[root@zabbix-server ~]# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xac54c138.
Command (m for help): p
Disk /dev/sdb: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xac54c138
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-41943039, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): +1G
Partition 1 of type Linux and of size 1 GiB is set
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@zabbix-server ~]# mkfs.xfs /dev/sdb1
meta-data=/dev/sdb1 isize=512 agcount=4, agsize=65536 blks
= sectsz=512 attr=2, projid32bit=1
= crc=1 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
[root@zabbix-server ~]# mkdir /sdb1
[root@zabbix-server ~]# mount /dev/sdb1 /sdb1/
[root@zabbix-server ~]# cd /sdb1/
[root@zabbix-server sdb1]# cp /etc/passwd .
[root@zabbix-server sdb1]# mkdir test
[root@zabbix-server sdb1]# touch test/a.txt
[root@zabbix-server sdb1]# tree
.
├── passwd
└── test
└── a.txt
1 directory, 2 files
二、进行备份
2.1、备份整个分区(这个功能类似快照，能快速恢复)
注意:备份的路径不能写成/sdb1/ 应是/dev/sdb1 或/sdb1
[root@zabbix-server ~]# xfsdump -f /opt/dump-sdb1 /dev/sdb1
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
============================= dump label dialog ==============================
please enter label for this dump session (timeout in 300 sec)
-> dump-sdb1
session label entered: "dump-sdb1"
--------------------------------- end dialog ---------------------------------
xfsdump: level 0 dump of zabbix-server:/sdb1
xfsdump: dump date: Sun Oct 7 14:00:24 2018
xfsdump: session id: c0ae2a93-b6f4-4d9f-9ccb-a2a2a1355ce2
xfsdump: session label: "dump-sdb1"
xfsdump: ino map phase 1: constructing initial dump list
xfsdump: ino map phase 2: skipping (no pruning necessary)
xfsdump: ino map phase 3: skipping (only one dump stream)
xfsdump: ino map construction complete
xfsdump: estimated dump size: 25856 bytes
xfsdump: /var/lib/xfsdump/inventory created
============================= media label dialog =============================
please enter label for media in drive 0 (timeout in 300 sec)
-> sdb1-v1
media label entered: "sdb1-v1"
--------------------------------- end dialog ---------------------------------
xfsdump: creating dump session media file 0 (media 0, file 0)
xfsdump: dumping ino map
xfsdump: dumping directories
xfsdump: dumping non-directory files
xfsdump: ending media file
xfsdump: media file size 23520 bytes
xfsdump: dump size (non-dir files) : 1568 bytes
xfsdump: dump complete: 137 seconds elapsed
xfsdump: Dump Summary:
xfsdump: stream 0 /opt/dump-sdb1 OK (success)
xfsdump: Dump Status: SUCCESS
2.1.1、指定备份时免交互操作，方便后期做定时备份
[root@zabbix-server ~]# xfsdump -f /opt/dump-sdb1 /sdb1 -L dump-sdb1 -M sdb1-v2
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsdump: Dump Status: SUCCESS
2.1.2、备份某分区的目录或文件
参数：-s 文件路径，针对指定的文件进行备份，-s 指定时，路径写的是相对路径
[root@zabbix-server ~]# xfsdump -f /opt/dump-boot.grub2 -s grub2/fonts /boot -L dump-boot -M boot.grub2
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsdump: Dump Status: SUCCESS
2.1.3、查看备份的信息
[root@zabbix-server ~]# ll /var/lib/xfsdump/inventory/
total 28
-rw-r--r-- 1 root root 312 Oct 7 14:30 036e12ba-88fc-4e0c-9eb1-2fe312d02176.InvIndex
-rw-r--r-- 1 root root 312 Oct 7 14:12 117f7835-83c8-471b-b69f-55743fa9f8e7.InvIndex
-rw-r--r-- 1 root root 5080 Oct 7 14:30 bd6e4e4d-6f0d-47e5-be33-bb0faa452331.StObj
-rw-r--r-- 1 root root 6416 Oct 7 14:12 d40f0506-c377-40c3-a3ad-df2c2ecd65af.StObj
-rw-r--r-- 1 root root 1120 Oct 7 14:30 fstab
[root@zabbix-server ~]# xfsdump -I
file system 0:
fs id: 117f7835-83c8-471b-b69f-55743fa9f8e7
session 0:
media id: 60cf7316-3c71-4899-bf7e-1215d7ddb9f1
.......
session 1:
mount point: zabbix-server:/sdb1
.......
session 2:
mount point: zabbix-server:/sdb1
.......
session 3:
mount point: zabbix-server:/sdb1
.......
xfsdump: Dump Status: SUCCESS
三、xfs文件系统的恢复和增量备份
3.1、文件的恢复
[root@zabbix-server ~]# rm -rf /sdb1/*
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
0 directories, 0 files
[root@zabbix-server ~]# xfsrestore -f /opt/dump-sdb1 /sdb1/
xfsrestore: using file dump (drive_simple) strategy
xfsrestore: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsrestore: Restore Status: SUCCESS
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── passwd
└── test
└── a.txt
1 directory, 2 files
3.2、文件的增量备份和恢复
3.2.1:增量备份
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── passwd
└── test
└── a.txt
1 directory, 2 files
[root@zabbix-server ~]# xfsdump -f /opt/dump-full /sdb1 -L sdb1-full -M sdb1
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsdump: Dump Status: SUCCESS
[root@zabbix-server ~]# touch /sdb1/a.txt /sdb1/b.txt
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── a.txt
├── b.txt
├── passwd
└── test
└── a.txt
1 directory, 4 files
[root@zabbix-server ~]# xfsdump -l 1 -f /opt/dump-bak1 /sdb1 -L sdb1-full -M sdb1
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsdump: Dump Status: SUCCESS
[root@zabbix-server ~]# touch /sdb1/test/1.txt /sdb1/test/2.txt
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── a.txt
├── b.txt
├── passwd
└── test
├── 1.txt
├── 2.txt
└── a.txt
1 directory, 6 files
[root@zabbix-server ~]# xfsdump -l 2 -f /opt/dump-bak2 /sdb1 -L sdb1-full -M sdb1
xfsdump: using file dump (drive_simple) strategy
xfsdump: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsdump: Dump Status: SUCCESS
3.2.2:备份恢复
[root@zabbix-server ~]# rm -rf /sdb1/*
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
0 directories, 0 files
[root@zabbix-server ~]# xfsrestore -f /opt/dump-full /sdb1/
xfsrestore: using file dump (drive_simple) strategy
xfsrestore: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsrestore: Restore Status: SUCCESS
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── passwd
└── test
└── a.txt
1 directory, 2 files
[root@zabbix-server ~]# xfsrestore -f /opt/dump-bak1 /sdb1/
xfsrestore: using file dump (drive_simple) strategy
xfsrestore: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsrestore: Restore Status: SUCCESS
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── a.txt
├── b.txt
├── passwd
└── test
└── a.txt
1 directory, 4 files
[root@zabbix-server ~]# xfsrestore -f /opt/dump-bak2 /sdb1/
xfsrestore: using file dump (drive_simple) strategy
xfsrestore: version 3.1.7 (dump format 3.0) - type ^C for status and control
.......
xfsrestore: Restore Status: SUCCESS
[root@zabbix-server ~]# tree /sdb1/
/sdb1/
├── a.txt
├── b.txt
├── passwd
└── test
├── 1.txt
├── 2.txt
└── a.txt
1 directory, 6 files
内容总结
以上是互联网集市为您收集整理的NTFS(Windows)、ext4(RHEL6)和xfs(RHEL7)文件系统的误删除恢复和备份全部内容，希望文章能够帮你解决NTFS(Windows)、ext4(RHEL6)和xfs(RHEL7)文件系统的误删除恢复和备份所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。