Python_Day01(Hello和Turtle库)
内容导读
互联网集市收集整理的这篇技术教程文章主要介绍了Python_Day01(Hello和Turtle库),小编现在分享给大家,供广大互联网技能从业者学习和参考。文章包含9390字,纯文字阅读大概需要14分钟。
内容图文
![Python_Day01(Hello和Turtle库)](/upload/InfoBanner/zyjiaocheng/645/e8ed9b4feafa4c2f88a74fe6e669f352.jpg)
Python_Day01(Hello和Turtle库)
Hello world
// hello.py
print('Hello world!')
print('你好,世界!')
print('你好','世界')
print('hello', 'world', sep=', ', end='!')
print('goodbye, world', end='!\n')
Turtle库的方法
1.forward() | fd():向前移动指定的距离。参数:一个数字(integer or float))。
turtle.forward(25)
2.backward() | bk() | back():向后移动指定的距离。参数:一个数字(integer or float))。
turtle.backward(30)
3…right() | rt():以角度单位向右转动。参数:一个数字(integer or float))。单位默认为度数,可以通过degrees()和radians()进行设置。
turtle.right(45)
4.left() | lt():以角度单位向左转动。参数:一个数字(integer or float))。单位默认为度数,可以通过degrees()和radians()进行设置。
tuetle.left(45)
5.goto() | steps() | setposition():移动到绝对位置,如果笔落下,画线,不改变方向。参数:x-一个数字或一对数字。y-一个数字或None。
turtle.setpos(60,30)
#(60.00,30.00)
6.setx():设置第一个坐标的值即X方向。参数:一个数字(integer or float))。
turtle.setx(10)
#(10.00,0.00)
7.sety():设置第二个坐标的值即Y方向。参数:一个数字(integer or float))。
turtle.sety(10)
#(0.00,10.00)
8.setheading() | seth(): 将方向设置为to_angle.就是东西南北方向。具体如下:
标准模式:0 - 东 90 - 北 180 - 西 270 - 南 标志模式 0- 北 90- 东 180- 南 270 - 西
turtle.setheading(90)
9.home() : 移动到原点 - 坐标(0,0):并将其标题设置为其起始方向(取决于模式)。
turtle.home()
# (0.00,0.00)
10.circle():绘制一个给定半径的圆。参数:radius-一个数字(半径,如果值为正则逆时针,负数为顺时针),extent-一个数字()steps- 执行的步数。
turtle.circle(120,180,5)
11.dot() :用颜色画出一个直径大小的圆点。参数:size-一个大于1的整数,可None。默认用的是pensize+4和2*pensize的最大值,color-颜色值
turtle.dot(20, "blue")
12.stamp():将当前位置上的形状复制到画布上返回stamp_id.可以调用,可以删除。
turtle.stamp()
13.clearstamp():删除stamp()返回来的值。参数:stampid。
14.clearstamps():删除全部stamp()的值。参数:stampid。
15.undo():撤销最后的动作。
16.speed():将速度设置为0…10范围内整数。如果没有参数,则返回当前速度。如果大于10或者小于0.5,则速度设置为0 。
“最快”:0 :直接成图,没有动画效果
“快”:10:大概一秒
“正常”:6:
“慢”:3
“最慢”:1
17:position() | pos(): 返回当前的位置。
turtle.pos()
# (0.00,0.00)
18.towards(): 返回当前位置同指定位置之间的角度。参数:x-一个数字或一对数字或一个实例的向量,y-如果x是数字,则为数字,否则为None。
turtle.goto(10,10)
tw = turtle.towards(0,0)
print(tw)
# 225
19.xcor():返回x坐标。
ycor():返回y坐标。
20.heading(): 返回当前的方向值。
21.distance():返回x,y两个点的直线距离
22.degrees():设置一整圈的度数。默认是360度。
23.radians():将角度测量单位设置为弧度。相当于 degrees(2*math.pi)
24.pendown() | pd() | down():放下笔,移动的时候绘图。
25.penup() | pu() | up():将提起笔,移动时无图。
26.pensize():设置线条的粗细。参数:width-一个正数
27.pen():使用键值对设置笔的属性:
“shown”: True/False
“pendown”: True/False
“pencolor”: 颜色字符串或者颜色值
“fillcolor”: 颜色字符串或者颜色值
“pensize”: 正数
“speed”: 速度范围为0..10的数字
“resizemode”: “auto” or “user” or “noresize”
“stretchfactor”: (positive number, positive number)
“outline”: 正数
“tilt”: 正数
28.isdown():如果笔停止返回True,反之False
29.pencolor():设置笔的颜色。
30.fillcolor():笔的填充色。
31.color():同时设置pencolor和fillcolor
32.filling():返回fillstate状态,如果填充则返回True,反之False。
33.begin_fill():在绘制要填充的形状前调用。当然在调用完还需要end_fill()。
34.reset():重置,将屏幕中的图纸删除,重新居中并将所有变量设置为默认值。
35.clear():删除图纸。对属性不做操作。
36.write():写文本。参数:arg-要写入的对象。move-是否移动。align-对齐方式:left,right,center。font-字体。fontname,fontsize,fonttype。
37.hideturtle() | ht() :删隐藏乌龟的形状,在做复杂绘图的时候隐藏的时候有利于提高绘图速度。
38.showturtle() | st():显示乌龟的形状。
39.isvisible():乌龟是否可见。如果可见返回True,反之则False。
40.shape():设置乌龟的图形形状,取值:“arrow”, “turtle”, “circle”, “square”, “triangle”, “classic”
41.isvisible():乌龟是否可见。如果可见返回True,反之则False。
42.resizemode():参数:rmode取值:“auto”,“user”,“noresize”.
43.shapesize() | turtlesize() : 返回笔的属性。
44.shearfactor(): 设置或者返回但钱的剪切因子。
45.tilt():旋转由turtle shape角度从当前的倾斜角度。
46.settiltangle():无论当前的倾斜角度如何,旋转乌龟指向 angle 指定的方向。参数:angle -数字。已弃用
47.tiltangle():设置或者返回当前的倾斜角度。参数:angle - 数字
48.shapetransform():设置或返回乌龟的形状的当前转换矩阵。
49.get_shapepoly():返回当前形状的坐标。
50.onclick():鼠标点击事件。参数:fun-一个带有两个参数的函数,这些参数将与画布上单击点的坐标一个调用。num-鼠标按钮的数量,默认为1(左键)。add- True的时候将添加新的绑定。否则替换以前的绑定。
51.onrelease():鼠标释放事件。参数同点击事件。
52.ondrag():鼠标移动事件。参数同点击事件。
53.begin_poly(): 开始记录多边形的顶点。
54.end_poly():停止记录多边形的顶点。
55.get_poly():返回最后记录的多边形。
56.clone():创建并返回具有相同位置等等属性的乌龟克隆。
57.getturtle() | getpen() :获取trutle对象本身。
58.getscreen():返回正在绘制的对象。
59.setundobuffer(): 设置或禁用中断器。参数: size-整数。如果大小是None,则禁用缓冲区。
60.undobufferentries():返回undobuffer中的条目数。
61.bgcolor():设置或者返回当前的TurtleScreen的背景颜色。
62.bgpic():设置背景图片。参数: picname-文件名。
62.delay(): 设置或返回以毫秒为单位的绘制延迟,延迟越大,绘图越慢。
63.ontimer():定时器。
64.mainloop() | done() :开始循环 。
65.textinput() | numinput():弹出一个输入字符串和数字的窗口。
66.mode(): 三种方式:“standard”, “logo” or “world”
海龟库的实例
"""
用Python的turtle模块绘制国旗
"""
import turtle
def draw_rectangle(x, y, width, height):
"""绘制矩形"""
turtle.goto(x, y)
turtle.pencolor('red')
turtle.fillcolor('red')
turtle.begin_fill()
for i in range(2):
turtle.forward(width)
turtle.left(90)
turtle.forward(height)
turtle.left(90)
turtle.end_fill()
def draw_star(x,y,radius):
"""绘制五角星"""
turtle.setpos(x, y)
pos1 = turtle.pos()
turtle.circle(-radius, 72)
pos2 = turtle.pos()
turtle.circle(-radius, 72)
pos3 = turtle.pos()
turtle.circle(-radius, 72)
pos4 = turtle.pos()
turtle.circle(-radius, 72)
pos5 = turtle.pos()
turtle.color('yellow', 'yellow')
turtle.begin_fill()
turtle.goto(pos3)
turtle.goto(pos1)
turtle.goto(pos4)
turtle.goto(pos2)
turtle.goto(pos5)
turtle.end_fill()
def main():
"""主程序"""
turtle.speed(5)
turtle.penup()
x, y = -270, -180
# 画国旗主体
width, height = 540, 360
draw_rectangle(x, y, width, height)
# 画大星星
pice = 22
center_x, center_y = x + 5 * pice, y + height - pice * 5
turtle.goto(center_x, center_y)
turtle.left(90)
turtle.forward(pice * 3)
turtle.right(90)
draw_star(turtle.xcor(), turtle.ycor(), pice * 3)
x_poses, y_poses = [10, 12, 12, 10], [2, 4, 7, 9]
# 画小星星
for x_pos, y_pos in zip(x_poses, y_poses):
turtle.goto(x + x_pos * pice, y + height - y_pos * pice)
turtle.left(turtle.towards(center_x, center_y) - turtle.heading())
turtle.forward(pice)
turtle.right(90)
draw_star(turtle.xcor(), turtle.ycor(), pice)
# 隐藏海龟
turtle.ht()
# 显示绘图窗口
turtle.mainloop()
if __name__ == '__main__':
main()
小猪佩奇
"""
绘制小猪佩奇
"""
from turtle import *
def nose(x,y):
"""画鼻子"""
penup()
# 将海龟移动到指定的坐标
goto(x,y)
pendown()
# 设置海龟的方向(0-东、90-北、180-西、270-南)
setheading(-30)
begin_fill()
a = 0.4
for i in range(120):
if 0 <= i < 30 or 60 <= i <90:
a = a + 0.08
# 向左转3度
left(3)
# 向前走
forward(a)
else:
a = a - 0.08
left(3)
forward(a)
end_fill()
penup()
setheading(90)
forward(25)
setheading(0)
forward(10)
pendown()
# 设置画笔的颜色(红, 绿, 蓝)
pencolor(255, 155, 192)
setheading(10)
begin_fill()
circle(5)
color(160, 82, 45)
end_fill()
penup()
setheading(0)
forward(20)
pendown()
pencolor(255, 155, 192)
setheading(10)
begin_fill()
circle(5)
color(160, 82, 45)
end_fill()
def head(x, y):
"""画头"""
color((255, 155, 192), "pink")
penup()
goto(x,y)
setheading(0)
pendown()
begin_fill()
setheading(180)
circle(300, -30)
circle(100, -60)
circle(80, -100)
circle(150, -20)
circle(60, -95)
setheading(161)
circle(-300, 15)
penup()
goto(-100, 100)
pendown()
setheading(-30)
a = 0.4
for i in range(60):
if 0<= i < 30 or 60 <= i < 90:
a = a + 0.08
lt(3) #向左转3度
fd(a) #向前走a的步长
else:
a = a - 0.08
lt(3)
fd(a)
end_fill()
def ears(x,y):
"""画耳朵"""
color((255, 155, 192), "pink")
penup()
goto(x, y)
pendown()
begin_fill()
setheading(100)
circle(-50, 50)
circle(-10, 120)
circle(-50, 54)
end_fill()
penup()
setheading(90)
forward(-12)
setheading(0)
forward(30)
pendown()
begin_fill()
setheading(100)
circle(-50, 50)
circle(-10, 120)
circle(-50, 56)
end_fill()
def eyes(x,y):
"""画眼睛"""
color((255, 155, 192), "white")
penup()
setheading(90)
forward(-20)
setheading(0)
forward(-95)
pendown()
begin_fill()
circle(15)
end_fill()
color("black")
penup()
setheading(90)
forward(12)
setheading(0)
forward(-3)
pendown()
begin_fill()
circle(3)
end_fill()
color((255, 155, 192), "white")
penup()
seth(90)
forward(-25)
seth(0)
forward(40)
pendown()
begin_fill()
circle(15)
end_fill()
color("black")
penup()
setheading(90)
forward(12)
setheading(0)
forward(-3)
pendown()
begin_fill()
circle(3)
end_fill()
def cheek(x,y):
"""画脸颊"""
color((255, 155, 192))
penup()
goto(x,y)
pendown()
setheading(0)
begin_fill()
circle(30)
end_fill()
def mouth(x,y):
"""画嘴巴"""
color(239, 69, 19)
penup()
goto(x, y)
pendown()
setheading(-80)
circle(30, 40)
circle(40, 80)
def setting():
"""设置参数"""
pensize(4)
# 隐藏海龟
hideturtle()
colormode(255)
color((255, 155, 192), "pink")
setup(840, 500)
speed(10)
def main():
"""主函数"""
setting()
nose(-100, 100)
head(-69, 167)
ears(0, 160)
eyes(0, 140)
cheek(80, 10)
mouth(-20, 30)
done()
if __name__ == '__main__':
main()
邱好好
发布了1 篇原创文章 · 获赞 0 · 访问量 33
私信
关注
内容总结
以上是互联网集市为您收集整理的Python_Day01(Hello和Turtle库)全部内容,希望文章能够帮你解决Python_Day01(Hello和Turtle库)所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错,欢迎将互联网集市网站推荐给程序员好友。
内容备注
版权声明:本文内容由互联网用户自发贡献,该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 gblab@vip.qq.com 举报,一经查实,本站将立刻删除。
内容手机端
扫描二维码推送至手机访问。