Python文件处理

内容导读

互联网集市收集整理的这篇技术教程文章主要介绍了Python文件处理，小编现在分享给大家，供广大互联网技能从业者学习和参考。文章包含19404字，纯文字阅读大概需要28分钟。

内容图文

1. 文件的操作

1.1 打开文件

格式：

def open(file, mode='r', buffering=None, encoding=None, errors=None, newline=None, closefd=True)

源码：

  1 def open(file, mode='r', buffering=None, encoding=None, errors=None, newline=None, closefd=True): # known special case of open
  2     """
  3     Open file and return a stream.  Raise IOError upon failure.
  4     
  5     file is either a text or byte string giving the name (and the path
  6     if the file isn't in the current working directory) of the file to
  7     be opened or an integer file descriptor of the file to be
  8     wrapped. (If a file descriptor is given, it is closed when the
  9     returned I/O object is closed, unless closefd is set to False.)
 10     
 11     mode is an optional string that specifies the mode in which the file
 12     is opened. It defaults to 'r' which means open for reading in text
 13     mode.  Other common values are 'w' for writing (truncating the file if
 14     it already exists), 'x' for creating and writing to a new file, and
 15     'a' for appending (which on some Unix systems, means that all writes
 16     append to the end of the file regardless of the current seek position).
 17     In text mode, if encoding is not specified the encoding used is platform
 18     dependent: locale.getpreferredencoding(False) is called to get the
 19     current locale encoding. (For reading and writing raw bytes use binary
 20     mode and leave encoding unspecified.) The available modes are:
 21     
 22     ========= ===============================================================
 23     Character Meaning
 24     --------- ---------------------------------------------------------------
 25     'r'       open for reading (default)
 26     'w'       open for writing, truncating the file first
 27     'x'       create a new file and open it for writing
 28     'a'       open for writing, appending to the end of the file if it exists
 29     'b'       binary mode
 30     't'       text mode (default)
 31     '+'       open a disk file for updating (reading and writing)
 32     'U'       universal newline mode (deprecated)
 33     ========= ===============================================================
 34     
 35     The default mode is 'rt' (open for reading text). For binary random
 36     access, the mode 'w+b' opens and truncates the file to 0 bytes, while
 37     'r+b' opens the file without truncation. The 'x' mode implies 'w' and
 38     raises an `FileExistsError` if the file already exists.
 39     
 40     Python distinguishes between files opened in binary and text modes,
 41     even when the underlying operating system doesn't. Files opened in
 42     binary mode (appending 'b' to the mode argument) return contents as
 43     bytes objects without any decoding. In text mode (the default, or when
 44     't' is appended to the mode argument), the contents of the file are
 45     returned as strings, the bytes having been first decoded using a
 46     platform-dependent encoding or using the specified encoding if given.
 47     
 48     'U' mode is deprecated and will raise an exception in future versions
 49     of Python.  It has no effect in Python 3.  Use newline to control
 50     universal newlines mode.
 51     
 52     buffering is an optional integer used to set the buffering policy.
 53     Pass 0 to switch buffering off (only allowed in binary mode), 1 to select
 54     line buffering (only usable in text mode), and an integer > 1 to indicate
 55     the size of a fixed-size chunk buffer.  When no buffering argument is
 56     given, the default buffering policy works as follows:
 57     
 58     * Binary files are buffered in fixed-size chunks; the size of the buffer
 59       is chosen using a heuristic trying to determine the underlying device's
 60       "block size" and falling back on `io.DEFAULT_BUFFER_SIZE`.
 61       On many systems, the buffer will typically be 4096 or 8192 bytes long.
 62     
 63     * "Interactive" text files (files for which isatty() returns True)
 64       use line buffering.  Other text files use the policy described above
 65       for binary files.
 66     
 67     encoding is the name of the encoding used to decode or encode the
 68     file. This should only be used in text mode. The default encoding is
 69     platform dependent, but any encoding supported by Python can be
 70     passed.  See the codecs module for the list of supported encodings.
 71     
 72     errors is an optional string that specifies how encoding errors are to
 73     be handled---this argument should not be used in binary mode. Pass
 74     'strict' to raise a ValueError exception if there is an encoding error
 75     (the default of None has the same effect), or pass 'ignore' to ignore
 76     errors. (Note that ignoring encoding errors can lead to data loss.)
 77     See the documentation for codecs.register or run 'help(codecs.Codec)'
 78     for a list of the permitted encoding error strings.
 79     
 80     newline controls how universal newlines works (it only applies to text
 81     mode). It can be None, '', '\n', '\r', and '\r\n'.  It works as
 82     follows:
 83     
 84     * On input, if newline is None, universal newlines mode is
 85       enabled. Lines in the input can end in '\n', '\r', or '\r\n', and
 86       these are translated into '\n' before being returned to the
 87       caller. If it is '', universal newline mode is enabled, but line
 88       endings are returned to the caller untranslated. If it has any of
 89       the other legal values, input lines are only terminated by the given
 90       string, and the line ending is returned to the caller untranslated.
 91     
 92     * On output, if newline is None, any '\n' characters written are
 93       translated to the system default line separator, os.linesep. If
 94       newline is '' or '\n', no translation takes place. If newline is any
 95       of the other legal values, any '\n' characters written are translated
 96       to the given string.
 97     
 98     If closefd is False, the underlying file descriptor will be kept open
 99     when the file is closed. This does not work when a file name is given
100     and must be True in that case.
101     
102     A custom opener can be used by passing a callable as *opener*. The
103     underlying file descriptor for the file object is then obtained by
104     calling *opener* with (*file*, *flags*). *opener* must return an open
105     file descriptor (passing os.open as *opener* results in functionality
106     similar to passing None).
107     
108     open() returns a file object whose type depends on the mode, and
109     through which the standard file operations such as reading and writing
110     are performed. When open() is used to open a file in a text mode ('w',
111     'r', 'wt', 'rt', etc.), it returns a TextIOWrapper. When used to open
112     a file in a binary mode, the returned class varies: in read binary
113     mode, it returns a BufferedReader; in write binary and append binary
114     modes, it returns a BufferedWriter, and in read/write mode, it returns
115     a BufferedRandom.
116     
117     It is also possible to use a string or bytearray as a file for both
118     reading and writing. For strings StringIO can be used like a file
119     opened in a text mode, and for bytes a BytesIO can be used like a file
120     opened in a binary mode.
121     """
122     pass

• file:被打开的文件名称。
• mode：文件打开模式，默认模式为r。
• buffering：设置缓存模式。0表示不缓存，1表示缓存，如果大于1则表示缓存区的大小，以字节为单位。
• encoding:字符编码。建议都带上参数 encoding='UTF-8'

afile=open("filetest.txt","w",encoding='UTF-8')

afile.write("这里是要写到文件的内容")

afile.close()

afile=open("filetest.txt","r",encoding='UTF-8')

filstr=afile.read()#读文件到变量里面，返回字符串

afile.close()

Print(filstr)

语法：

#!/usr/bin/env python
# -*- coding:utf-8 -*-

f = open('demo')
print(f)
f.close()
# <_io.TextIOWrapper name='demo' mode='r' encoding='UTF-8'>
#python3默认以可读(r)、'utf-8'编码方式打开文件

###===r模式打开文件===
f = open('demo.txt',mode='r',encoding='utf-8')  #文件句柄
data = f.read()
print(data)
f.close()


###===w模式打开文件===
#a.该文件存在
f = open('demo.txt',mode='w',encoding='utf-8')
# data = f.read()   #io.UnsupportedOperation: not readable,不可读
f.close()
#发现使用w打开原有文件，尽管什么都不做，该文件内容已被清空(删除)

###b.该文件不存在
f = open('demo1.txt',mode='w',encoding='utf-8')
f.close()
#不存在则创建该文件


###===a模式打开文件===
f = open('demo2.txt',mode='a',encoding='utf-8')
# data = f.read()   #io.UnsupportedOperation: not readable
f.write('这是一首词牌名!')
f.close()
#该文件不存在则创建新文件并写入内容，存在则在后面追加内容。

###===b模式打开文件===
# f = open('demo2.txt',mode='b',encoding='utf-8')
# #ValueError: binary mode doesn't take an encoding argument

# f = open('demo2.txt',mode='b')
#alueError: Must have exactly one of create/read/write/append mode and at most one plus

f = open('demo3.txt',mode='br')
data = f.read()
print(data)
f.close()

###===t模式打开文件===
# f = open('demo3.txt','t')
#ValueError: Must have exactly one of create/read/write/append mode and at most one plus

f = open('demo3.txt','tr')
data = f.read()
print(data)
f.close()

###===x模式打开文件===
# 如果文件存在则报错：FileExistsError: [Errno 17] File exists: 'demo4.txt'
f = open('demo41.txt',mode='x',encoding='utf-8')
f.write('人生苦短，我用python')
f.close()

###===+模式打开文件===
# f = open('demo4.txt','+')
#ValueError: Must have exactly one of create/read/write/append mode and at most one plus

#+需要和a/r/w/x结合使用,并且添加追加功能，即写文件不删除原内容
f = open('demo4.txt','r+')
data = f.read()
print(data)
f.write("人生苦短，我用python")    #不删除原有内容
f.close()

###===U模式打开文件===
f = open('demo5.txt','U')
# f.write('hello')    #io.UnsupportedOperation: not writable不可写
print(f.readlines())    #['adcdefg\n', '    dsfsdfs\n', 'hijklmn']
f.close()

with...as...打开文件： 

　　通过with打开文件，每次执行完毕之后会自动关闭该文件。

#打开一个文件
with open('demo','r',encoding='utf-8') as f:
    print(f.read())
#连续打开两个文件
with open('demo1.txt','r',encoding='utf-8') as f1,open('demo2.txt','r',encoding='utf-8') as f2:
    print(f1.read(),f2.read())

1.2 文件读取

　　文件读取有三种方式，read()、readline()、readlines()。

 1     def read(self, size=-1): # known case of _io.FileIO.read
 2         """
 3         Read at most size bytes, returned as bytes.
 4         
 5         Only makes one system call, so less data may be returned than requested.
 6         In non-blocking mode, returns None if no data is available.
 7         Return an empty bytes object at EOF.
 8         """
 9         return ""
10     
11     def readline(self, limit=-1):
12         """Read and return one line from the stream.
13 
14         :type limit: numbers.Integral
15         :rtype: unicode
16         """
17         pass
18 
19     def readlines(self, hint=-1):
20         """Read and return a list of lines from the stream.
21 
22         :type hint: numbers.Integral
23         :rtype: list[unicode]
24         """
25         return []

read():
　　从文件中一次性读取所有内容，该方法耗内存。

#Read at most size bytes, returned as bytes.
f = open('demo',mode='r',encoding='utf-8')
data = f.read()
print(data)
f.close()

f = open('demo.txt',mode='r',encoding='utf-8')
data = f.read(5)    #读取文件前5个字节
print(data)
f.close()

readline():

　　每次读取文件中的一行，需要使用用真表达式循环读取文件。当文件指针移动到末尾时，依然使用readline()读取文件将出现错误。因此需要添加1个判断语句，判断指针是否移动到文件尾部，并终止循环。

f = open('demo',mode='r',encoding='utf-8')
while True:
    line = f.readline()
    if line:
        print(line.strip())
    else:
        print(line)     #空
        print(bool(line))   #False
        break

 　　可以加参数，参数为整数，表示每行读几个字节，知道行末尾。

f = open('demo',mode='r',encoding='utf-8')
while True:
    line = f.readline(8)
    if line:
        print(line.strip())
    else:
        break


'''
###################demo文件内容##############
伫倚危楼风细细。
望极春愁，黯黯生天际。
草色烟光残照里。无言谁会凭阑意。

拟把疏狂图一醉。
对酒当歌，强乐还无味。
衣带渐宽终不悔。为伊消得人憔悴。
#########################################
运行结果：
伫倚危楼风细细。

望极春愁，黯黯生
天际。
草色烟光残照里。
无言谁会凭阑意。


拟把疏狂图一醉。

对酒当歌，强乐还
无味。
衣带渐宽终不悔。
为伊消得人憔悴。
'''

readlines():

　　表示多行读取，需要通过循环访问readlines()返回列表中的元素，该方法耗内存。

f = open('demo','r')
lines = f.readlines()
print(lines)
print(type(lines))    #返回的是一个列表<class 'list'>
for line in lines:
    print(line.strip())
f.close()

练习：读取前5行内容

 1 #方法一：使用readlines一次性读取
 2 f = open('demo',mode='r',encoding='utf-8')
 3 data = f.readlines()
 4 for index,line in enumerate(data):
 5     if index==5:
 6         break
 7     print(line)
 8 f.close()
 9 
10 #方法二：使用readline逐行读取（推荐该方法，省内存）
11 f = open('demo',mode='r',encoding='utf-8')
12 for line in range(5):
13     print(f.readline())

1.3 文件的写入

　　文件的写入可以使用write()、writelines()方法写入。write()把字符串写入文件，writelines()可以把列表中存储的内容写入文件。

　　使用wiritelines()写文件的速度更快，如果需要写入文件的字符串较多，可以使用writelines。如果只需写入少量字符串则可以使用write()

源码：

    def write(self, s):
        """Write the unicode string s to the stream and return the number of
        characters written.

        :type b: unicode
        :rtype: int
        """
        return 0


    def writelines(self, lines):
        """Write a list of lines to the stream.

        :type lines: collections.Iterable[unicode]
        :rtype: None
        """
        pass

write():

f = open('demo','a+')
print(f.write('\n这是一首词牌名'))
f.close()

 writelines():

l = ['a','b','c','1','2','3']
f = open('demo','a+')
f.writelines(l)     #写入内容：abcabc123
f.close()

1.4 其他操作

    def close(self, *args, **kwargs): # real signature unknown
        """
        Flush and close the IO object.
        
        This method has no effect if the file is already closed.
        """
        pass
#刷新并关闭文件
f = open('a.txt','a+',encoding='utf-8')
f.write('hello')
f.close()
	
	

    def fileno(self, *args, **kwargs): # real signature unknown
        """
        Returns underlying file descriptor if one exists.
        
        OSError is raised if the IO object does not use a file descriptor.
        """
        pass
#文件描述符
f = open('a.txt','r',encoding='utf-8')
print(f.fileno())
f.close()



    def flush(self, *args, **kwargs): # real signature unknown
        """
        Flush write buffers, if applicable.
        
        This is not implemented for read-only and non-blocking streams.
        """
        pass
# 刷新文件内部缓冲区
f = open('a.txt','a+',encoding='utf-8')
print(f.fileno())
f.write("JJJJJJJJJJJJJJJJJJ")
f.flush()
input = input("wait for input:")
f.close()



    def isatty(self, *args, **kwargs): # real signature unknown
        """
        Return whether this is an 'interactive' stream.
        
        Return False if it can't be determined.
        """
        pass
#判断文件是不是tty设备
f = open('a.txt','r',encoding='utf-8')
print(f.isatty())
f.close()



    def readable(self, *args, **kwargs): # real signature unknown
        """
        Return whether object was opened for reading.
        
        If False, read() will raise OSError.
        """
        pass
#判断文件是否可读
f = open('a.txt','w',encoding='utf-8')
print(f.readable()) #False，因为使用w模式不可读
f.close()



    def seek(self, *args, **kwargs): # real signature unknown
        """
        Change stream position.
        
        Change the stream position to the given byte offset. The offset is
        interpreted relative to the position indicated by whence.  Values
        for whence are:
        
        * 0 -- start of stream (the default); offset should be zero or positive
        * 1 -- current stream position; offset may be negative
        * 2 -- end of stream; offset is usually negative
        
        Return the new absolute position.
        """
        pass
#把文件的指针移动到一个新的位置。
#格式：seek(offset[,whence]),offset表示相对于whence的位置。whence用于设置相对位置的起点，如果whence省略，offset表示相对文件开头的位置。
#0表示从文件开头开始计算。
#1表示从当前位置开始计算。
#2表示从文件末尾开始计算。
f = open('a.txt','r',encoding='utf-8')
print(f.read(2))    
print(f.tell())
f.seek(0)
print(f.read(3))
f.close()



    def seekable(self, *args, **kwargs): # real signature unknown
        """
        Return whether object supports random access.
        
        If False, seek(), tell() and truncate() will raise OSError.
        This method may need to do a test seek().
        """
        pass
#判断指针是否操作
f = open('a.txt','r',encoding='utf-8')
print(f.seekable())
f.close()



    def tell(self, *args, **kwargs): # real signature unknown
        """ Return current stream position. """
        pass
#返回指针位置
f = open('a.txt','r',encoding='utf-8')
f.read(2)
print(f.tell())	#2
f.close()



    def truncate(self, *args, **kwargs): # real signature unknown
        """
        Truncate file to size bytes.
        
        File pointer is left unchanged.  Size defaults to the current IO
        position as reported by tell().  Returns the new size.
        """
        pass
#截断数据
f = open('a.txt','r+',encoding='utf-8')
f.truncate()    #不加参数文件清空
f.close()
#加参数，从文件开头截取
f = open('a.txt','r+',encoding='utf-8')
f.truncate(4)   #截取文件前面4个字节
f.close()



    def writable(self, *args, **kwargs): # real signature unknown
        """
        Return whether object was opened for writing.
        
        If False, write() will raise OSError.
        """
        pass
#判断文件是否可写
f = open('a.txt','r',encoding='utf-8')
print(f.writable()) #False，因为是用r模式打开
f.close()

1.5 文件的删除

 　　文件的删除需要使用os模块和os.path模块。os模块提供了对系统环境、文件、目录等操作系统级的接口函数。文件的删除需要调用remove()函数实现。要删除文件之前需要先判断文件是否存在，若存在则删除，不存在则不进行操作，如果文件被其他占用则不能删除，报错如下：PermissionError: [WinError 32] 另一个程序正在使用此文件，进程无法访问。: 'a.txt'。

import os
if os.path.exists('test.txt'):
    os.remove('test.txt')

1.6 文件的复制

文件复制方法一：读、写方式复制

#边读边写
f = open('a.txt','r',encoding='utf-8')
f_new = open('a_new.txt','w',encoding='utf-8')
for line in f:
    f_new.write(line)
f.close()
f_new.close()

#或者先全部读取，然后再写
f = open('a.txt','r',encoding='utf-8')
f_new = open('a_new.txt','w',encoding='utf-8')
src = f.read()
f_new.write(src)
f.close()
f_new.close()

文件复制方法二：使用shutil模块

import shutil

shutil.copyfile('a.txt','a1.txt')

1.7 文件重命名

　　使用os.rename()模块进行文件重命名。

文件重命名：

import os

li = os.listdir('.')
print(li)   #返回一个文件列表
if 'a1.txt' in li:  #判断文件是否存在
    os.rename('a1.txt','A1.txt')

文件修改后缀：

import os

#将a.doc修改为a.html
f_list = os.listdir('.')
print(f_list)   #f_list是一个文件列表，如['a.doc', 'b.txt', 'c.txt']
for f_name in f_list:   #循环该列吧
    p = f_name.find('.')    #查找每个元素(字符串).的位置，如a.doc的位置是1。
    print(p)
    print(f_name)   #a.doc
    if f_name[p+1:] == 'doc':   #截取.后面的所有字符，如果是doc
        new_name = f_name[:p+1]+'html'  #则截取.和.前面的字符串加上html，即新字符串为a.html
        os.rename(f_name,new_name)  #将新名字重命名给旧文件上面

上面的f_name.find('.')也可以使用os.path.splitext('.')来返回一个元组实现，如下。

import os
f_list = os.listdir('.')
for f_name in f_list:
    li = os.path.splitext(f_name)　　#以.截取，如('a', '.doc')
    print(li)
    if li[1] == '.doc':
        new_name = li[0]+'.html'
        os.rename(f_name,new_name)

1.8 文件的替换

　　文件的替换原理：将原文件读取，替换相应内容，并将新内容写入新文件中。

 1 '''
 2 a.txt内容如下：
 3 abcdefg
 4 hijklmn
 5 xyz
 6 xyz
 7 '''
 8 
 9 f = open('a.txt','r',encoding='utf-8')
10 f_new = open('aa.txt','w',encoding='utf-8')
11 
12 for line in f:
13     if 'xyz'==line:
14         line = 'XYZ'
15     f_new.write(line)
16 
17 f.close()
18 f_new.close()

 1 '''
 2 a.txt内容如下：
 3 abcdefg
 4 hijklmn
 5 xyz
 6 xyz
 7 '''
 8 
 9 f = open('a.txt','r',encoding='utf-8')
10 f_new = open('aa.txt','w',encoding='utf-8')
11 
12 for line in f.readlines():
13     f_new.write(line.replace('xyz','XYZ'))
14 
15 f.close()
16 f_new.close()

内容总结

以上是互联网集市为您收集整理的Python文件处理全部内容，希望文章能够帮你解决Python文件处理所遇到的程序开发问题。 如果觉得互联网集市技术教程内容还不错，欢迎将互联网集市网站推荐给程序员好友。

内容备注

版权声明：本文内容由互联网用户自发贡献，该文观点与技术仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 gblab@vip.qq.com 举报，一经查实，本站将立刻删除。

内容手机端